From 86608c6770cf08c138a2bdab5855072f64be09ef Mon Sep 17 00:00:00 2001 From: joshua Date: Sat, 30 Dec 2023 23:54:31 -0500 Subject: initial commit --- Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c | 1311 ++++++++++++++++++++++ 1 file changed, 1311 insertions(+) create mode 100644 Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c') diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c new file mode 100644 index 0000000..1105c16 --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c @@ -0,0 +1,1311 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** + * @brief STM32H7xx HAL Driver version number V1.11.1 + */ +#define __STM32H7xx_HAL_VERSION_MAIN (0x01UL) /*!< [31:24] main version */ +#define __STM32H7xx_HAL_VERSION_SUB1 (0x0BUL) /*!< [23:16] sub1 version */ +#define __STM32H7xx_HAL_VERSION_SUB2 (0x01UL) /*!< [15:8] sub2 version */ +#define __STM32H7xx_HAL_VERSION_RC (0x00UL) /*!< [7:0] release candidate */ +#define __STM32H7xx_HAL_VERSION ((__STM32H7xx_HAL_VERSION_MAIN << 24)\ + |(__STM32H7xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32H7xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32H7xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) +#define VREFBUF_TIMEOUT_VALUE (uint32_t)10 /* 10 ms */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) De-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief This function is used to initialize the HAL Library; it must be the first + * instruction to be executed in the main program (before to call any other + * HAL function), it performs the following: + * Configures the SysTick to generate an interrupt each 1 millisecond, + * which is clocked by the HSI (at this stage, the clock is not yet + * configured and thus the system is running from the internal HSI at 16 MHz). + * Set NVIC Group Priority to 4. + * Calls the HAL_MspInit() callback function defined in user file + * "stm32h7xx_hal_msp.c" to do the global low level hardware initialization + * + * @note SysTick is used as time base for the HAL_Delay() function, the application + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + +uint32_t common_system_clock; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + /* Configure Cortex-M4 Instruction cache through ART accelerator */ + __HAL_RCC_ART_CLK_ENABLE(); /* Enable the Cortex-M4 ART Clock */ + __HAL_ART_CONFIG_BASE_ADDRESS(0x08100000UL); /* Configure the Cortex-M4 ART Base address to the Flash Bank 2 : */ + __HAL_ART_ENABLE(); /* Enable the Cortex-M4 ART */ +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Update the SystemCoreClock global variable */ +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU); +#endif + + /* Update the SystemD2Clock global variable */ +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + return HAL_ERROR; + } + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the systick. + * This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB4_FORCE_RESET(); + __HAL_RCC_AHB4_RELEASE_RESET(); + + __HAL_RCC_APB3_FORCE_RESET(); + __HAL_RCC_APB3_RELEASE_RESET(); + + __HAL_RCC_APB1L_FORCE_RESET(); + __HAL_RCC_APB1L_RELEASE_RESET(); + + __HAL_RCC_APB1H_FORCE_RESET(); + __HAL_RCC_APB1H_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_APB4_FORCE_RESET(); + __HAL_RCC_APB4_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * the SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ + if((uint32_t)uwTickFreq == 0UL) + { + return HAL_ERROR; + } + + /* Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000UL / (uint32_t)uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup HAL_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in Systick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval Status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32H7xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Return the third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.5 V. + * This requires VDDA equal to or higher than 2.8 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.048 V. + * This requires VDDA equal to or higher than 2.4 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE2: VREF_OUT3 around 1.8 V. + * This requires VDDA equal to or higher than 2.1 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE3: VREF_OUT4 around 1.5 V. + * This requires VDDA equal to or higher than 1.8 V. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0UL) + { + if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** + * @brief Ethernet PHY Interface Selection either MII or RMII + * @param SYSCFG_ETHInterface: Selects the Ethernet PHY interface + * This parameter can be one of the following values: + * @arg SYSCFG_ETH_MII : Select the Media Independent Interface + * @arg SYSCFG_ETH_RMII: Select the Reduced Media Independent Interface + * @retval None + */ +void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_ETHERNET_CONFIG(SYSCFG_ETHInterface)); + + MODIFY_REG(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL, (uint32_t)(SYSCFG_ETHInterface)); +} +#endif /* SYSCFG_PMCR_EPIS_SEL */ + +/** + * @brief Analog Switch control for dual analog pads. + * @param SYSCFG_AnalogSwitch: Selects the analog pad + * This parameter can be one or a combination of the following values: + * @arg SYSCFG_SWITCH_PA0 : Select PA0 analog switch + * @arg SYSCFG_SWITCH_PA1: Select PA1 analog switch + * @arg SYSCFG_SWITCH_PC2 : Select PC2 analog switch + * @arg SYSCFG_SWITCH_PC3: Select PC3 analog switch + * @param SYSCFG_SwitchState: Open or Close the analog switch between dual pads (PXn and PXn_C) + * This parameter can be one or a combination of the following values: + * @arg SYSCFG_SWITCH_PA0_OPEN + * @arg SYSCFG_SWITCH_PA0_CLOSE + * @arg SYSCFG_SWITCH_PA1_OPEN + * @arg SYSCFG_SWITCH_PA1_CLOSE + * @arg SYSCFG_SWITCH_PC2_OPEN + * @arg SYSCFG_SWITCH_PC2_CLOSE + * @arg SYSCFG_SWITCH_PC3_OPEN + * @arg SYSCFG_SWITCH_PC3_CLOSE + * @retval None + */ + +void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_ANALOG_SWITCH(SYSCFG_AnalogSwitch)); + assert_param(IS_SYSCFG_SWITCH_STATE(SYSCFG_SwitchState)); + + MODIFY_REG(SYSCFG->PMCR, (uint32_t) SYSCFG_AnalogSwitch, (uint32_t)(SYSCFG_SwitchState)); +} + +#if defined(SYSCFG_PMCR_BOOSTEN) +/** + * @brief Enables the booster to reduce the total harmonic distortion of the analog + * switch when the supply voltage is lower than 2.7 V. + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +void HAL_SYSCFG_EnableBOOST(void) +{ + SET_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} + +/** + * @brief Disables the booster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +void HAL_SYSCFG_DisableBOOST(void) +{ + CLEAR_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} +#endif /* SYSCFG_PMCR_BOOSTEN */ + +#if defined (SYSCFG_UR2_BOOT_ADD0) || defined (SYSCFG_UR2_BCM7_ADD0) +/** + * @brief BootCM7 address 0 configuration + * @param BootRegister :Specifies the Boot Address register (Address0 or Address1) + * This parameter can be one of the following values: + * @arg SYSCFG_BOOT_ADDR0 : Select the boot address0 + * @arg SYSCFG_BOOT_ADDR1: Select the boot address1 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address0 or Address1 + * @retval None + */ +void HAL_SYSCFG_CM7BootAddConfig(uint32_t BootRegister, uint32_t BootAddress) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_BOOT_REGISTER(BootRegister)); + assert_param(IS_SYSCFG_BOOT_ADDRESS(BootAddress)); + if ( BootRegister == SYSCFG_BOOT_ADDR0 ) + { + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0, ((BootAddress >> 16) << SYSCFG_UR2_BCM7_ADD0_Pos)); +#else + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0, ((BootAddress >> 16) << SYSCFG_UR2_BOOT_ADD0_Pos)); +#endif /*DUAL_CORE*/ + } + else + { + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1, (BootAddress >> 16)); +#else + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1, (BootAddress >> 16)); +#endif /*DUAL_CORE*/ + } +} +#endif /* SYSCFG_UR2_BOOT_ADD0 || SYSCFG_UR2_BCM7_ADD0 */ + +#if defined(DUAL_CORE) +/** + * @brief BootCM4 address 0 configuration + * @param BootRegister :Specifies the Boot Address register (Address0 or Address1) + * This parameter can be one of the following values: + * @arg SYSCFG_BOOT_ADDR0 : Select the boot address0 + * @arg SYSCFG_BOOT_ADDR1: Select the boot address1 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address0 or Address1 + * @retval None + */ +void HAL_SYSCFG_CM4BootAddConfig(uint32_t BootRegister, uint32_t BootAddress) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_BOOT_REGISTER(BootRegister)); + assert_param(IS_SYSCFG_BOOT_ADDRESS(BootAddress)); + + if ( BootRegister == SYSCFG_BOOT_ADDR0 ) + { + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0, ((BootAddress >> 16)<< SYSCFG_UR3_BCM4_ADD0_Pos)); + } + + else + { + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1, (BootAddress >> 16)); + } +} + +/** + * @brief Enables the Cortex-M7 boot + * @retval None + */ +void HAL_SYSCFG_EnableCM7BOOT(void) +{ + SET_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM7); +} + +/** + * @brief Disables the Cortex-M7 boot + * @note Disabling the boot will gate the CPU clock + * @retval None + */ +void HAL_SYSCFG_DisableCM7BOOT(void) +{ + CLEAR_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM7) ; +} + +/** + * @brief Enables the Cortex-M4 boot + * @retval None + */ +void HAL_SYSCFG_EnableCM4BOOT(void) +{ + SET_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4); +} + +/** + * @brief Disables the Cortex-M4 boot + * @note Disabling the boot will gate the CPU clock + * @retval None + */ +void HAL_SYSCFG_DisableCM4BOOT(void) +{ + CLEAR_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4); +} +#endif /*DUAL_CORE*/ +/** + * @brief Enables the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +void HAL_EnableCompensationCell(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN) ; +} + +/** + * @brief Power-down the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +void HAL_DisableCompensationCell(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + + +/** + * @brief To Enable optimize the I/O speed when the product voltage is low. + * @note This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be + * used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is + * higher than 2.5 V might be destructive. + * @retval None + */ +void HAL_SYSCFG_EnableIOSpeedOptimize(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + SET_BIT(SYSCFG->CCCSR, (SYSCFG_CCCSR_HSLV0| SYSCFG_CCCSR_HSLV1 | SYSCFG_CCCSR_HSLV2 | SYSCFG_CCCSR_HSLV3)); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @note This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be + * used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is + * higher than 2.5 V might be destructive. + * @retval None + */ +void HAL_SYSCFG_DisableIOSpeedOptimize(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + CLEAR_BIT(SYSCFG->CCCSR, (SYSCFG_CCCSR_HSLV0| SYSCFG_CCCSR_HSLV1 | SYSCFG_CCCSR_HSLV2 | SYSCFG_CCCSR_HSLV3)); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_CompCode: Selects the code to be applied for the I/O compensation cell + * This parameter can be one of the following values: + * @arg SYSCFG_CELL_CODE : Select Code from the cell (available in the SYSCFG_CCVR) + * @arg SYSCFG_REGISTER_CODE: Select Code from the SYSCFG compensation cell code register (SYSCFG_CCCR) + * @retval None + */ +void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_SELECT(SYSCFG_CompCode)); + MODIFY_REG(SYSCFG->CCCSR, SYSCFG_CCCSR_CS, (uint32_t)(SYSCFG_CompCode)); +} + +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_PMOSCode: PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @param SYSCFG_NMOSCode: NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode)); + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode)); + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC|SYSCFG_CCCR_PCC, (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) ); +} + +#if defined(SYSCFG_CCCR_NCC_MMC) +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_PMOSCode: VDDMMC PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @param SYSCFG_NMOSCode: VDDMMC NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +void HAL_SYSCFG_VDDMMC_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode)); + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode)); + MODIFY_REG(SYSCFG->CCCR, (SYSCFG_CCCR_NCC_MMC | SYSCFG_CCCR_PCC_MMC), (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) ); +} +#endif /* SYSCFG_CCCR_NCC_MMC */ + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) +/** @brief SYSCFG ADC2 internal input alternate connection macros + * @param Adc2AltRout0 This parameter can be a value of : + * @arg @ref SYSCFG_ADC2_ROUT0_DAC1_1 DAC1_out1 connected to ADC2 VINP[16] + * @arg @ref SYSCFG_ADC2_ROUT0_VBAT4 VBAT/4 connected to ADC2 VINP[16] + */ +void HAL_SYSCFG_ADC2ALT_Rout0Config(uint32_t Adc2AltRout0) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_ADC2ALT_ROUT0(Adc2AltRout0)); + + MODIFY_REG(SYSCFG->ADC2ALT, SYSCFG_ADC2ALT_ADC2_ROUT0, Adc2AltRout0); +} +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0*/ + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +/** @brief SYSCFG ADC2 internal input alternate connection macros + * @param Adc2AltRout1 This parameter can be a value of : + * @arg @ref SYSCFG_ADC2_ROUT1_DAC1_2 DAC1_out2 connected to ADC2 VINP[17] + * @arg @ref SYSCFG_ADC2_ROUT1_VREFINT VREFINT connected to ADC2 VINP[17] + */ +void HAL_SYSCFG_ADC2ALT_Rout1Config(uint32_t Adc2AltRout1) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_ADC2ALT_ROUT1(Adc2AltRout1)); + + MODIFY_REG(SYSCFG->ADC2ALT, SYSCFG_ADC2ALT_ADC2_ROUT1, Adc2AltRout1); +} +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT1*/ + +/** + * @brief Enable the Debug Module during Domain1/CDomain SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain SLEEP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + + +/** + * @brief Enable the Debug Module during Domain1/CDomain STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Enable the Debug Module during Domain1/CDomain STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable the Debug Module during Domain1 SLEEP mode + * @retval None + */ +void HAL_EnableDomain2DBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Disable the Debug Module during Domain2 SLEEP mode + * @retval None + */ +void HAL_DisableDomain2DBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Enable the Debug Module during Domain2 STOP mode + * @retval None + */ +void HAL_EnableDomain2DBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Disable the Debug Module during Domain2 STOP mode + * @retval None + */ +void HAL_DisableDomain2DBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Enable the Debug Module during Domain2 STANDBY mode + * @retval None + */ +void HAL_EnableDomain2DBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} + +/** + * @brief Disable the Debug Module during Domain2 STANDBY mode + * @retval None + */ +void HAL_DisableDomain2DBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} +#endif /*DUAL_CORE*/ + +#if defined(DBGMCU_CR_DBG_STOPD3) +/** + * @brief Enable the Debug Module during Domain3/SRDomain STOP mode + * @retval None + */ +void HAL_EnableDomain3DBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} + +/** + * @brief Disable the Debug Module during Domain3/SRDomain STOP mode + * @retval None + */ +void HAL_DisableDomain3DBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} +#endif /*DBGMCU_CR_DBG_STOPD3*/ + +#if defined(DBGMCU_CR_DBG_STANDBYD3) +/** + * @brief Enable the Debug Module during Domain3/SRDomain STANDBY mode + * @retval None + */ +void HAL_EnableDomain3DBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} + +/** + * @brief Disable the Debug Module during Domain3/SRDomain STANDBY mode + * @retval None + */ +void HAL_DisableDomain3DBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ + +/** + * @brief Set the FMC Memory Mapping Swapping config. + * @param BankMapConfig: Defines the FMC Bank mapping configuration. This parameter can be + FMC_SWAPBMAP_DISABLE, FMC_SWAPBMAP_SDRAM_SRAM, FMC_SWAPBMAP_SDRAMB2 + * @retval HAL state + */ +void HAL_SetFMCMemorySwappingConfig(uint32_t BankMapConfig) +{ + /* Check the parameter */ + assert_param(IS_FMC_SWAPBMAP_MODE(BankMapConfig)); + MODIFY_REG(FMC_Bank1_R->BTCR[0], FMC_BCR1_BMAP, BankMapConfig); +} + +/** + * @brief Get FMC Bank mapping mode. + * @retval The FMC Bank mapping mode. This parameter can be + FMC_SWAPBMAP_DISABLE, FMC_SWAPBMAP_SDRAM_SRAM, FMC_SWAPBMAP_SDRAMB2 +*/ +uint32_t HAL_GetFMCMemorySwappingConfig(void) +{ + return READ_BIT(FMC_Bank1_R->BTCR[0], FMC_BCR1_BMAP); +} + +/** + * @brief Configure the EXTI input event line edge + * @note No edge configuration for direct lines but for configurable lines:(EXTI_LINE0..EXTI_LINE21), + * EXTI_LINE49,EXTI_LINE51,EXTI_LINE82,EXTI_LINE84,EXTI_LINE85 and EXTI_LINE86. + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Edge: Specifies EXTI line Edge used. + * This parameter can be one of the following values : + * @arg EXTI_RISING_EDGE : Configurable line, with Rising edge trigger detection + * @arg EXTI_FALLING_EDGE: Configurable line, with Falling edge trigger detection + * @retval None + */ +void HAL_EXTI_EdgeConfig(uint32_t EXTI_Line , uint32_t EXTI_Edge ) +{ + /* Check the parameter */ + assert_param(IS_HAL_EXTI_CONFIG_LINE(EXTI_Line)); + assert_param(IS_EXTI_EDGE_LINE(EXTI_Edge)); + + /* Clear Rising Falling edge configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->FTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI->RTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + + if( (EXTI_Edge & EXTI_RISING_EDGE) == EXTI_RISING_EDGE) + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI->RTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + if( (EXTI_Edge & EXTI_FALLING_EDGE) == EXTI_FALLING_EDGE) + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->FTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } +} + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0..EXTI_LINE21),EXTI_LINE49,EXTI_LINE51,EXTI_LINE82,EXTI_LINE84,EXTI_LINE85 and EXTI_LINE86. + * @retval None + */ +void HAL_EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_HAL_EXTI_CONFIG_LINE(EXTI_Line)); + + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->SWIER1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); +} + + +/** + * @brief Clears the EXTI's line pending flags for Domain D1 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @retval None + */ +void HAL_EXTI_D1_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_D1_LINE(EXTI_Line)); + WRITE_REG(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->PR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + +} + +#if defined(DUAL_CORE) +/** + * @brief Clears the EXTI's line pending flags for Domain D2 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @retval None + */ +void HAL_EXTI_D2_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_D2_LINE(EXTI_Line)); + WRITE_REG(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->PR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); +} + +#endif /*DUAL_CORE*/ +/** + * @brief Configure the EXTI input event line for Domain D1 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Mode: Specifies which EXTI line is used as interrupt or an event. + * This parameter can be one or a combination of the following values : + * @arg EXTI_MODE_IT : Interrupt Mode selected + * @arg EXTI_MODE_EVT : Event Mode selected + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + + * @retval None + */ +void HAL_EXTI_D1_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd ) +{ + /* Check the parameter */ + assert_param(IS_EXTI_D1_LINE(EXTI_Line)); + assert_param(IS_EXTI_MODE_LINE(EXTI_Mode)); + + if( (EXTI_Mode & EXTI_MODE_IT) == EXTI_MODE_IT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } + + if( (EXTI_Mode & EXTI_MODE_EVT) == EXTI_MODE_EVT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D1->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + else + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D1->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } +} + +#if defined(DUAL_CORE) +/** + * @brief Configure the EXTI input event line for Domain D2 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Mode: Specifies which EXTI line is used as interrupt or an event. + * This parameter can be one or a combination of the following values : + * @arg EXTI_MODE_IT : Interrupt Mode selected + * @arg EXTI_MODE_EVT : Event Mode selected + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + + * @retval None + */ +void HAL_EXTI_D2_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd ) +{ + /* Check the parameter */ + assert_param(IS_EXTI_D2_LINE(EXTI_Line)); + assert_param(IS_EXTI_MODE_LINE(EXTI_Mode)); + + if( (EXTI_Mode & EXTI_MODE_IT) == EXTI_MODE_IT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } + + if( (EXTI_Mode & EXTI_MODE_EVT) == EXTI_MODE_EVT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D2->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + else + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D2->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } +} +#endif /*DUAL_CORE*/ + +/** + * @brief Configure the EXTI input event line for Domain D3 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0...EXTI_LINE15),(EXTI_LINE19...EXTI_LINE21),EXTI_LINE25, EXTI_LINE34, + * EXTI_LINE35,EXTI_LINE41,(EXTI_LINE48...EXTI_LINE53) + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + * @param EXTI_ClearSrc: Specifies the clear source of D3 pending event. + * This parameter can be one of the following values : + * @arg BDMA_CH6_CLEAR : BDMA ch6 event selected as D3 domain pendclear source + * @arg BDMA_CH7_CLEAR : BDMA ch7 event selected as D3 domain pendclear source + * @arg LPTIM4_OUT_CLEAR : LPTIM4 out selected as D3 domain pendclear source + * @arg LPTIM5_OUT_CLEAR : LPTIM5 out selected as D3 domain pendclear source + * @retval None + */ +void HAL_EXTI_D3_EventInputConfig(uint32_t EXTI_Line, uint32_t EXTI_LineCmd , uint32_t EXTI_ClearSrc ) +{ + __IO uint32_t *pRegv; + + /* Check the parameter */ + assert_param(IS_EXTI_D3_LINE(EXTI_Line)); + assert_param(IS_EXTI_D3_CLEAR(EXTI_ClearSrc)); + + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->D3PMR1)) + ((EXTI_Line >> 5 ) * 0x20UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->D3PMR1)) +((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + + if(((EXTI_Line>>4)%2UL) == 0UL) + { + pRegv = (__IO uint32_t *) (((uint32_t) &(EXTI->D3PCR1L)) + ((EXTI_Line >> 5 ) * 0x20UL)); + } + else + { + pRegv = (__IO uint32_t *) (((uint32_t) &(EXTI->D3PCR1H)) + ((EXTI_Line >> 5 ) * 0x20UL)); + } + MODIFY_REG(*pRegv, (uint32_t)(3UL << ((EXTI_Line*2UL) & 0x1FUL)), (uint32_t)(EXTI_ClearSrc << ((EXTI_Line*2UL) & 0x1FUL))); + +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + -- cgit v1.2.3