From 86608c6770cf08c138a2bdab5855072f64be09ef Mon Sep 17 00:00:00 2001 From: joshua Date: Sat, 30 Dec 2023 23:54:31 -0500 Subject: initial commit --- .../STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma2d.c | 2185 ++++++++++++++++++++ 1 file changed, 2185 insertions(+) create mode 100644 Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma2d.c (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma2d.c') diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma2d.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma2d.c new file mode 100644 index 0000000..8de04e6 --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma2d.c @@ -0,0 +1,2185 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma2d.c + * @author MCD Application Team + * @brief DMA2D HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the DMA2D peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Program the required configuration through the following parameters: + the transfer mode, the output color mode and the output offset using + HAL_DMA2D_Init() function. + + (#) Program the required configuration through the following parameters: + the input color mode, the input color, the input alpha value, the alpha mode, + the red/blue swap mode, the inverted alpha mode and the input offset using + HAL_DMA2D_ConfigLayer() function for foreground or/and background layer. + + *** Polling mode IO operation *** + ================================= + [..] + (#) Configure pdata parameter (explained hereafter), destination and data length + and enable the transfer using HAL_DMA2D_Start(). + (#) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage + user can specify the value of timeout according to his end application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (#) Configure pdata parameter, destination and data length and enable + the transfer using HAL_DMA2D_Start_IT(). + (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() interrupt subroutine. + (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback (member + of DMA2D handle structure). + (#) In case of error, the HAL_DMA2D_IRQHandler() function calls the callback + XferErrorCallback. + + -@- In Register-to-Memory transfer mode, pdata parameter is the register + color, in Memory-to-memory or Memory-to-Memory with pixel format + conversion pdata is the source address. + + -@- Configure the foreground source address, the background source address, + the destination and data length then Enable the transfer using + HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT() + in interrupt mode. + + -@- HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions + are used if the memory to memory with blending transfer mode is selected. + + (#) Optionally, configure and enable the CLUT using HAL_DMA2D_CLUTLoad() in polling + mode or HAL_DMA2D_CLUTLoad_IT() in interrupt mode. + + (#) Optionally, configure the line watermark in using the API HAL_DMA2D_ProgramLineEvent(). + + (#) Optionally, configure the dead time value in the AHB clock cycle inserted between two + consecutive accesses on the AHB master port in using the API HAL_DMA2D_ConfigDeadTime() + and enable/disable the functionality with the APIs HAL_DMA2D_EnableDeadTime() or + HAL_DMA2D_DisableDeadTime(). + + (#) The transfer can be suspended, resumed and aborted using the following + functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort(). + + (#) The CLUT loading can be suspended, resumed and aborted using the following + functions: HAL_DMA2D_CLUTLoading_Suspend(), HAL_DMA2D_CLUTLoading_Resume(), + HAL_DMA2D_CLUTLoading_Abort(). + + (#) To control the DMA2D state, use the following function: HAL_DMA2D_GetState(). + + (#) To read the DMA2D error code, use the following function: HAL_DMA2D_GetError(). + + *** DMA2D HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA2D HAL driver : + + (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral. + (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags. + (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags. + (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts. + (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts. + (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt is enabled or not. + + *** Callback registration *** + =================================== + [..] + (#) The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use function @ref HAL_DMA2D_RegisterCallback() to register a user callback. + + (#) Function @ref HAL_DMA2D_RegisterCallback() allows to register following callbacks: + (+) XferCpltCallback : callback for transfer complete. + (+) XferErrorCallback : callback for transfer error. + (+) LineEventCallback : callback for line event. + (+) CLUTLoadingCpltCallback : callback for CLUT loading completion. + (+) MspInitCallback : DMA2D MspInit. + (+) MspDeInitCallback : DMA2D MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (#) Use function @ref HAL_DMA2D_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_DMA2D_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) XferCpltCallback : callback for transfer complete. + (+) XferErrorCallback : callback for transfer error. + (+) LineEventCallback : callback for line event. + (+) CLUTLoadingCpltCallback : callback for CLUT loading completion. + (+) MspInitCallback : DMA2D MspInit. + (+) MspDeInitCallback : DMA2D MspDeInit. + + (#) By default, after the @ref HAL_DMA2D_Init and if the state is HAL_DMA2D_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions: + examples @ref HAL_DMA2D_LineEventCallback(), @ref HAL_DMA2D_CLUTLoadingCpltCallback() + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_DMA2D_Init + and @ref HAL_DMA2D_DeInit only when these callbacks are null (not registered beforehand) + If not, MspInit or MspDeInit are not null, the @ref HAL_DMA2D_Init and @ref HAL_DMA2D_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + Exception as well for Transfer Completion and Transfer Error callbacks that are not defined + as weak (surcharged) functions. They must be defined by the user to be resorted to. + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_DMA2D_RegisterCallback before calling @ref HAL_DMA2D_DeInit + or @ref HAL_DMA2D_Init function. + + When The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + (@) You can refer to the DMA2D HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +#ifdef HAL_DMA2D_MODULE_ENABLED +#if defined (DMA2D) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA2D DMA2D + * @brief DMA2D HAL module driver + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup DMA2D_Private_Constants DMA2D Private Constants + * @{ + */ + +/** @defgroup DMA2D_TimeOut DMA2D Time Out + * @{ + */ +#define DMA2D_TIMEOUT_ABORT (1000U) /*!< 1s */ +#define DMA2D_TIMEOUT_SUSPEND (1000U) /*!< 1s */ +/** + * @} + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup DMA2D_Private_Functions DMA2D Private Functions + * @{ + */ +static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height); +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions + * @{ + */ + +/** @defgroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DMA2D + (+) De-initialize the DMA2D + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA2D according to the specified + * parameters in the DMA2D_InitTypeDef and create the associated handle. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d) +{ + /* Check the DMA2D peripheral state */ + if (hdma2d == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance)); + assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode)); + assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode)); + assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset)); + assert_param(IS_DMA2D_ALPHA_INVERTED(hdma2d->Init.AlphaInverted)); + assert_param(IS_DMA2D_RB_SWAP(hdma2d->Init.RedBlueSwap)); + assert_param(IS_DMA2D_LOM_MODE(hdma2d->Init.LineOffsetMode)); + assert_param(IS_DMA2D_BYTES_SWAP(hdma2d->Init.BytesSwap)); + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + if (hdma2d->State == HAL_DMA2D_STATE_RESET) + { + /* Reset Callback pointers in HAL_DMA2D_STATE_RESET only */ + hdma2d->LineEventCallback = HAL_DMA2D_LineEventCallback; + hdma2d->CLUTLoadingCpltCallback = HAL_DMA2D_CLUTLoadingCpltCallback; + if (hdma2d->MspInitCallback == NULL) + { + hdma2d->MspInitCallback = HAL_DMA2D_MspInit; + } + + /* Init the low level hardware */ + hdma2d->MspInitCallback(hdma2d); + } +#else + if (hdma2d->State == HAL_DMA2D_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hdma2d->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_DMA2D_MspInit(hdma2d); + } +#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* DMA2D CR register configuration -------------------------------------------*/ + MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_MODE | DMA2D_CR_LOM, hdma2d->Init.Mode | hdma2d->Init.LineOffsetMode); + + /* DMA2D OPFCCR register configuration ---------------------------------------*/ + MODIFY_REG(hdma2d->Instance->OPFCCR, DMA2D_OPFCCR_CM | DMA2D_OPFCCR_SB, + hdma2d->Init.ColorMode | hdma2d->Init.BytesSwap); + + /* DMA2D OOR register configuration ------------------------------------------*/ + MODIFY_REG(hdma2d->Instance->OOR, DMA2D_OOR_LO, hdma2d->Init.OutputOffset); + /* DMA2D OPFCCR AI and RBS fields setting (Output Alpha Inversion)*/ + MODIFY_REG(hdma2d->Instance->OPFCCR, (DMA2D_OPFCCR_AI | DMA2D_OPFCCR_RBS), + ((hdma2d->Init.AlphaInverted << DMA2D_OPFCCR_AI_Pos) | \ + (hdma2d->Init.RedBlueSwap << DMA2D_OPFCCR_RBS_Pos))); + + + /* Update error code */ + hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE; + + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Deinitializes the DMA2D peripheral registers to their default reset + * values. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ + +HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d) +{ + + /* Check the DMA2D peripheral state */ + if (hdma2d == NULL) + { + return HAL_ERROR; + } + + /* Before aborting any DMA2D transfer or CLUT loading, check + first whether or not DMA2D clock is enabled */ + if (__HAL_RCC_DMA2D_IS_CLK_ENABLED()) + { + /* Abort DMA2D transfer if any */ + if ((hdma2d->Instance->CR & DMA2D_CR_START) == DMA2D_CR_START) + { + if (HAL_DMA2D_Abort(hdma2d) != HAL_OK) + { + /* Issue when aborting DMA2D transfer */ + return HAL_ERROR; + } + } + else + { + /* Abort background CLUT loading if any */ + if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START) + { + if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 0U) != HAL_OK) + { + /* Issue when aborting background CLUT loading */ + return HAL_ERROR; + } + } + else + { + /* Abort foreground CLUT loading if any */ + if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START) + { + if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 1U) != HAL_OK) + { + /* Issue when aborting foreground CLUT loading */ + return HAL_ERROR; + } + } + } + } + } + + /* Reset DMA2D control registers*/ + hdma2d->Instance->CR = 0U; + hdma2d->Instance->IFCR = 0x3FU; + hdma2d->Instance->FGOR = 0U; + hdma2d->Instance->BGOR = 0U; + hdma2d->Instance->FGPFCCR = 0U; + hdma2d->Instance->BGPFCCR = 0U; + hdma2d->Instance->OPFCCR = 0U; + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + + if (hdma2d->MspDeInitCallback == NULL) + { + hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; + } + + /* DeInit the low level hardware */ + hdma2d->MspDeInitCallback(hdma2d); + +#else + /* Carry on with de-initialization of low level hardware */ + HAL_DMA2D_MspDeInit(hdma2d); +#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ + + /* Update error code */ + hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE; + + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Initializes the DMA2D MSP. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_MspInit can be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the DMA2D MSP. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_MspDeInit can be implemented in the user file. + */ +} + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DMA2D Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdma2d DMA2D handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DMA2D_TRANSFERCOMPLETE_CB_ID DMA2D transfer complete Callback ID + * @arg @ref HAL_DMA2D_TRANSFERERROR_CB_ID DMA2D transfer error Callback ID + * @arg @ref HAL_DMA2D_LINEEVENT_CB_ID DMA2D line event Callback ID + * @arg @ref HAL_DMA2D_CLUTLOADINGCPLT_CB_ID DMA2D CLUT loading completion Callback ID + * @arg @ref HAL_DMA2D_MSPINIT_CB_ID DMA2D MspInit callback ID + * @arg @ref HAL_DMA2D_MSPDEINIT_CB_ID DMA2D MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @note No weak predefined callbacks are defined for HAL_DMA2D_TRANSFERCOMPLETE_CB_ID or HAL_DMA2D_TRANSFERERROR_CB_ID + * @retval status + */ +HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, + pDMA2D_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hdma2d); + + if (HAL_DMA2D_STATE_READY == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_TRANSFERCOMPLETE_CB_ID : + hdma2d->XferCpltCallback = pCallback; + break; + + case HAL_DMA2D_TRANSFERERROR_CB_ID : + hdma2d->XferErrorCallback = pCallback; + break; + + case HAL_DMA2D_LINEEVENT_CB_ID : + hdma2d->LineEventCallback = pCallback; + break; + + case HAL_DMA2D_CLUTLOADINGCPLT_CB_ID : + hdma2d->CLUTLoadingCpltCallback = pCallback; + break; + + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = pCallback; + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_DMA2D_STATE_RESET == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = pCallback; + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma2d); + return status; +} + +/** + * @brief Unregister a DMA2D Callback + * DMA2D Callback is redirected to the weak (surcharged) predefined callback + * @param hdma2d DMA2D handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DMA2D_TRANSFERCOMPLETE_CB_ID DMA2D transfer complete Callback ID + * @arg @ref HAL_DMA2D_TRANSFERERROR_CB_ID DMA2D transfer error Callback ID + * @arg @ref HAL_DMA2D_LINEEVENT_CB_ID DMA2D line event Callback ID + * @arg @ref HAL_DMA2D_CLUTLOADINGCPLT_CB_ID DMA2D CLUT loading completion Callback ID + * @arg @ref HAL_DMA2D_MSPINIT_CB_ID DMA2D MspInit callback ID + * @arg @ref HAL_DMA2D_MSPDEINIT_CB_ID DMA2D MspDeInit callback ID + * @note No weak predefined callbacks are defined for HAL_DMA2D_TRANSFERCOMPLETE_CB_ID or HAL_DMA2D_TRANSFERERROR_CB_ID + * @retval status + */ +HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma2d); + + if (HAL_DMA2D_STATE_READY == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_TRANSFERCOMPLETE_CB_ID : + hdma2d->XferCpltCallback = NULL; + break; + + case HAL_DMA2D_TRANSFERERROR_CB_ID : + hdma2d->XferErrorCallback = NULL; + break; + + case HAL_DMA2D_LINEEVENT_CB_ID : + hdma2d->LineEventCallback = HAL_DMA2D_LineEventCallback; + break; + + case HAL_DMA2D_CLUTLOADINGCPLT_CB_ID : + hdma2d->CLUTLoadingCpltCallback = HAL_DMA2D_CLUTLoadingCpltCallback; + break; + + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */ + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_DMA2D_STATE_RESET == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */ + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma2d); + return status; +} +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/** @defgroup DMA2D_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the pdata, destination address and data size then + start the DMA2D transfer. + (+) Configure the source for foreground and background, destination address + and data size then start a MultiBuffer DMA2D transfer. + (+) Configure the pdata, destination address and data size then + start the DMA2D transfer with interrupt. + (+) Configure the source for foreground and background, destination address + and data size then start a MultiBuffer DMA2D transfer with interrupt. + (+) Abort DMA2D transfer. + (+) Suspend DMA2D transfer. + (+) Resume DMA2D transfer. + (+) Enable CLUT transfer. + (+) Configure CLUT loading then start transfer in polling mode. + (+) Configure CLUT loading then start transfer in interrupt mode. + (+) Abort DMA2D CLUT loading. + (+) Suspend DMA2D CLUT loading. + (+) Resume DMA2D CLUT loading. + (+) Poll for transfer complete. + (+) handle DMA2D interrupt request. + (+) Transfer watermark callback. + (+) CLUT Transfer Complete callback. + + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA2D Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param pdata Configure the source memory Buffer address if + * Memory-to-Memory or Memory-to-Memory with pixel format + * conversion mode is selected, or configure + * the color value if Register-to-Memory mode is selected. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height); + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Start the DMA2D Transfer with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param pdata Configure the source memory Buffer address if + * the Memory-to-Memory or Memory-to-Memory with pixel format + * conversion mode is selected, or configure + * the color value if Register-to-Memory mode is selected. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height); + + /* Enable the transfer complete, transfer error and configuration error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Start the multi-source DMA2D Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param SrcAddress1 The source memory Buffer address for the foreground layer. + * @param SrcAddress2 The source memory Buffer address for the background layer. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, + uint32_t DstAddress, uint32_t Width, uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_FG) + { + /*blending & fixed FG*/ + WRITE_REG(hdma2d->Instance->FGCOLR, SrcAddress1); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress2, DstAddress, Width, Height); + } + else if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_BG) + { + /*blending & fixed BG*/ + WRITE_REG(hdma2d->Instance->BGCOLR, SrcAddress2); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + else + { + /* Configure DMA2D Stream source2 address */ + WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2); + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Start the multi-source DMA2D Transfer with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param SrcAddress1 The source memory Buffer address for the foreground layer. + * @param SrcAddress2 The source memory Buffer address for the background layer. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, + uint32_t DstAddress, uint32_t Width, uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_FG) + { + /*blending & fixed FG*/ + WRITE_REG(hdma2d->Instance->FGCOLR, SrcAddress1); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress2, DstAddress, Width, Height); + } + else if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_BG) + { + /*blending & fixed BG*/ + WRITE_REG(hdma2d->Instance->BGCOLR, SrcAddress2); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + else + { + WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2); + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + + /* Enable the transfer complete, transfer error and configuration error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Abort the DMA2D Transfer. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d) +{ + uint32_t tickstart; + + /* Abort the DMA2D transfer */ + /* START bit is reset to make sure not to set it again, in the event the HW clears it + between the register read and the register write by the CPU (writing 0 has no + effect on START bitvalue) */ + MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the DMA2D is effectively disabled */ + while ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_ABORT) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + + /* Disable the Transfer Complete, Transfer Error and Configuration Error interrupts */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); + + /* Change the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Suspend the DMA2D Transfer. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d) +{ + uint32_t tickstart; + + /* Suspend the DMA2D transfer */ + /* START bit is reset to make sure not to set it again, in the event the HW clears it + between the register read and the register write by the CPU (writing 0 has no + effect on START bitvalue). */ + MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the DMA2D is effectively suspended */ + while ((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == DMA2D_CR_START) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_SUSPEND) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + + /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */ + if ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) + { + hdma2d->State = HAL_DMA2D_STATE_SUSPEND; + } + else + { + /* Make sure SUSP bit is cleared since it is meaningless + when no transfer is on-going */ + CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA2D Transfer. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d) +{ + /* Check the SUSP and START bits */ + if ((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == (DMA2D_CR_SUSP | DMA2D_CR_START)) + { + /* Ongoing transfer is suspended: change the DMA2D state before resuming */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + } + + /* Resume the DMA2D transfer */ + /* START bit is reset to make sure not to set it again, in the event the HW clears it + between the register read and the register write by the CPU (writing 0 has no + effect on START bitvalue). */ + CLEAR_BIT(hdma2d->Instance->CR, (DMA2D_CR_SUSP | DMA2D_CR_START)); + + return HAL_OK; +} + + +/** + * @brief Enable the DMA2D CLUT Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Enable the background CLUT loading */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + else + { + /* Enable the foreground CLUT loading */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg->CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg->Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, + uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg->CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg->Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @note API obsolete and maintained for compatibility with legacy. User is + * invited to resort to HAL_DMA2D_CLUTStartLoad() instead to benefit from + * code compactness, code size and improved heap usage. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @note API obsolete and maintained for compatibility with legacy. User is + * invited to resort to HAL_DMA2D_CLUTStartLoad_IT() instead to benefit + * from code compactness, code size and improved heap usage. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Abort the DMA2D CLUT loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + uint32_t tickstart; + const __IO uint32_t *reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */ + + /* Abort the CLUT loading */ + SET_BIT(hdma2d->Instance->CR, DMA2D_CR_ABORT); + + /* If foreground CLUT loading is considered, update local variables */ + if (LayerIdx == DMA2D_FOREGROUND_LAYER) + { + reg = &(hdma2d->Instance->FGPFCCR); + } + + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the CLUT loading is aborted */ + while ((*reg & DMA2D_BGPFCCR_START) != 0U) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_ABORT) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + + /* Disable the CLUT Transfer Complete, Transfer Error, Configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Change the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Suspend the DMA2D CLUT loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + uint32_t tickstart; + uint32_t loadsuspended; + const __IO uint32_t *reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */ + + /* Suspend the CLUT loading */ + SET_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + + /* If foreground CLUT loading is considered, update local variables */ + if (LayerIdx == DMA2D_FOREGROUND_LAYER) + { + reg = &(hdma2d->Instance->FGPFCCR); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the CLUT loading is suspended */ + /* 1st condition: Suspend Check */ + loadsuspended = ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) ? 1UL : 0UL; + /* 2nd condition: Not Start Check */ + loadsuspended |= ((*reg & DMA2D_BGPFCCR_START) != DMA2D_BGPFCCR_START) ? 1UL : 0UL; + while (loadsuspended == 0UL) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_SUSPEND) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + /* 1st condition: Suspend Check */ + loadsuspended = ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) ? 1UL : 0UL; + /* 2nd condition: Not Start Check */ + loadsuspended |= ((*reg & DMA2D_BGPFCCR_START) != DMA2D_BGPFCCR_START) ? 1UL : 0UL; + } + + /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */ + if ((*reg & DMA2D_BGPFCCR_START) != 0U) + { + hdma2d->State = HAL_DMA2D_STATE_SUSPEND; + } + else + { + /* Make sure SUSP bit is cleared since it is meaningless + when no transfer is on-going */ + CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA2D CLUT loading. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + /* Check the SUSP and START bits for background or foreground CLUT loading */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Background CLUT loading suspension check */ + if ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) + { + if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START) + { + /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + } + } + } + else + { + /* Foreground CLUT loading suspension check */ + if ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) + { + if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START) + { + /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + } + } + } + + /* Resume the CLUT loading */ + CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + + return HAL_OK; +} + + +/** + + * @brief Polling for transfer complete or CLUT loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t layer_start; + __IO uint32_t isrflags = 0x0U; + + /* Polling for DMA2D transfer */ + if ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == 0U) + { + isrflags = READ_REG(hdma2d->Instance->ISR); + if ((isrflags & (DMA2D_FLAG_CE | DMA2D_FLAG_TE)) != 0U) + { + if ((isrflags & DMA2D_FLAG_CE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; + } + if ((isrflags & DMA2D_FLAG_TE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; + } + /* Clear the transfer and configuration error flags */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE | DMA2D_FLAG_TE); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + } + } + /* Polling for CLUT loading (foreground or background) */ + layer_start = hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START; + layer_start |= hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START; + if (layer_start != 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == 0U) + { + isrflags = READ_REG(hdma2d->Instance->ISR); + if ((isrflags & (DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE)) != 0U) + { + if ((isrflags & DMA2D_FLAG_CAE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE; + } + if ((isrflags & DMA2D_FLAG_CE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; + } + if ((isrflags & DMA2D_FLAG_TE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; + } + /* Clear the CLUT Access Error, Configuration Error and Transfer Error flags */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + } + } + + /* Clear the transfer complete and CLUT loading flags */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC | DMA2D_FLAG_CTC); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} +/** + * @brief Handle DMA2D interrupt request. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d) +{ + uint32_t isrflags = READ_REG(hdma2d->Instance->ISR); + uint32_t crflags = READ_REG(hdma2d->Instance->CR); + + /* Transfer Error Interrupt management ***************************************/ + if ((isrflags & DMA2D_FLAG_TE) != 0U) + { + if ((crflags & DMA2D_IT_TE) != 0U) + { + /* Disable the transfer Error interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; + + /* Clear the transfer error flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferErrorCallback != NULL) + { + /* Transfer error Callback */ + hdma2d->XferErrorCallback(hdma2d); + } + } + } + /* Configuration Error Interrupt management **********************************/ + if ((isrflags & DMA2D_FLAG_CE) != 0U) + { + if ((crflags & DMA2D_IT_CE) != 0U) + { + /* Disable the Configuration Error interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE); + + /* Clear the Configuration error flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferErrorCallback != NULL) + { + /* Transfer error Callback */ + hdma2d->XferErrorCallback(hdma2d); + } + } + } + /* CLUT access Error Interrupt management ***********************************/ + if ((isrflags & DMA2D_FLAG_CAE) != 0U) + { + if ((crflags & DMA2D_IT_CAE) != 0U) + { + /* Disable the CLUT access error interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CAE); + + /* Clear the CLUT access error flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferErrorCallback != NULL) + { + /* Transfer error Callback */ + hdma2d->XferErrorCallback(hdma2d); + } + } + } + /* Transfer watermark Interrupt management **********************************/ + if ((isrflags & DMA2D_FLAG_TW) != 0U) + { + if ((crflags & DMA2D_IT_TW) != 0U) + { + /* Disable the transfer watermark interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TW); + + /* Clear the transfer watermark flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TW); + + /* Transfer watermark Callback */ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + hdma2d->LineEventCallback(hdma2d); +#else + HAL_DMA2D_LineEventCallback(hdma2d); +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + + } + } + /* Transfer Complete Interrupt management ************************************/ + if ((isrflags & DMA2D_FLAG_TC) != 0U) + { + if ((crflags & DMA2D_IT_TC) != 0U) + { + /* Disable the transfer complete interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC); + + /* Clear the transfer complete flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferCpltCallback != NULL) + { + /* Transfer complete Callback */ + hdma2d->XferCpltCallback(hdma2d); + } + } + } + /* CLUT Transfer Complete Interrupt management ******************************/ + if ((isrflags & DMA2D_FLAG_CTC) != 0U) + { + if ((crflags & DMA2D_IT_CTC) != 0U) + { + /* Disable the CLUT transfer complete interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC); + + /* Clear the CLUT transfer complete flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + /* CLUT Transfer complete Callback */ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + hdma2d->CLUTLoadingCpltCallback(hdma2d); +#else + HAL_DMA2D_CLUTLoadingCpltCallback(hdma2d); +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + } + } + +} + +/** + * @brief Transfer watermark callback. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_LineEventCallback can be implemented in the user file. + */ +} + +/** + * @brief CLUT Transfer Complete callback. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_CLUTLoadingCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup DMA2D_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the DMA2D foreground or background layer parameters. + (+) Configure the DMA2D CLUT transfer. + (+) Configure the line watermark + (+) Configure the dead time value. + (+) Enable or disable the dead time value functionality. + + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMA2D Layer according to the specified + * parameters in the DMA2D_HandleTypeDef. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + DMA2D_LayerCfgTypeDef *pLayerCfg; + uint32_t regMask; + uint32_t regValue; + + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_OFFSET(hdma2d->LayerCfg[LayerIdx].InputOffset)); + if (hdma2d->Init.Mode != DMA2D_R2M) + { + assert_param(IS_DMA2D_INPUT_COLOR_MODE(hdma2d->LayerCfg[LayerIdx].InputColorMode)); + if (hdma2d->Init.Mode != DMA2D_M2M) + { + assert_param(IS_DMA2D_ALPHA_MODE(hdma2d->LayerCfg[LayerIdx].AlphaMode)); + } + } + assert_param(IS_DMA2D_ALPHA_INVERTED(hdma2d->LayerCfg[LayerIdx].AlphaInverted)); + assert_param(IS_DMA2D_RB_SWAP(hdma2d->LayerCfg[LayerIdx].RedBlueSwap)); + + if ((LayerIdx == DMA2D_FOREGROUND_LAYER) && (hdma2d->LayerCfg[LayerIdx].InputColorMode == DMA2D_INPUT_YCBCR)) + { + assert_param(IS_DMA2D_CHROMA_SUB_SAMPLING(hdma2d->LayerCfg[LayerIdx].ChromaSubSampling)); + } + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + pLayerCfg = &hdma2d->LayerCfg[LayerIdx]; + + /* Prepare the value to be written to the BGPFCCR or FGPFCCR register */ + regValue = pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << DMA2D_BGPFCCR_AM_Pos) | \ + (pLayerCfg->AlphaInverted << DMA2D_BGPFCCR_AI_Pos) | (pLayerCfg->RedBlueSwap << DMA2D_BGPFCCR_RBS_Pos); + regMask = (DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA | DMA2D_BGPFCCR_AI | DMA2D_BGPFCCR_RBS); + + + if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) + { + regValue |= (pLayerCfg->InputAlpha & DMA2D_BGPFCCR_ALPHA); + } + else + { + regValue |= (pLayerCfg->InputAlpha << DMA2D_BGPFCCR_ALPHA_Pos); + } + + /* Configure the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write DMA2D BGPFCCR register */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, regMask, regValue); + + /* DMA2D BGOR register configuration -------------------------------------*/ + WRITE_REG(hdma2d->Instance->BGOR, pLayerCfg->InputOffset); + + /* DMA2D BGCOLR register configuration -------------------------------------*/ + if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) + { + WRITE_REG(hdma2d->Instance->BGCOLR, pLayerCfg->InputAlpha & (DMA2D_BGCOLR_BLUE | DMA2D_BGCOLR_GREEN | \ + DMA2D_BGCOLR_RED)); + } + } + /* Configure the foreground DMA2D layer */ + else + { + + if (pLayerCfg->InputColorMode == DMA2D_INPUT_YCBCR) + { + regValue |= (pLayerCfg->ChromaSubSampling << DMA2D_FGPFCCR_CSS_Pos); + regMask |= DMA2D_FGPFCCR_CSS; + } + + /* Write DMA2D FGPFCCR register */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, regMask, regValue); + + /* DMA2D FGOR register configuration -------------------------------------*/ + WRITE_REG(hdma2d->Instance->FGOR, pLayerCfg->InputOffset); + + /* DMA2D FGCOLR register configuration -------------------------------------*/ + if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) + { + WRITE_REG(hdma2d->Instance->FGCOLR, pLayerCfg->InputAlpha & (DMA2D_FGCOLR_BLUE | DMA2D_FGCOLR_GREEN | \ + DMA2D_FGCOLR_RED)); + } + } + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Configure the DMA2D CLUT Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @note API obsolete and maintained for compatibility with legacy. User is invited + * to resort to HAL_DMA2D_CLUTStartLoad() instead to benefit from code compactness, + * code size and improved heap usage. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + } + + /* Set the DMA2D state to Ready*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + + +/** + * @brief Configure the line watermark. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param Line Line Watermark configuration (maximum 16-bit long value expected). + * @note HAL_DMA2D_ProgramLineEvent() API enables the transfer watermark interrupt. + * @note The transfer watermark interrupt is disabled once it has occurred. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line) +{ + /* Check the parameters */ + if (Line > DMA2D_LWR_LW) + { + return HAL_ERROR; + } + else + { + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Sets the Line watermark configuration */ + WRITE_REG(hdma2d->Instance->LWR, Line); + + /* Enable the Line interrupt */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TW); + + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; + } +} + +/** + * @brief Enable DMA2D dead time feature. + * @param hdma2d DMA2D handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d) +{ + /* Process Locked */ + __HAL_LOCK(hdma2d); + + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Set DMA2D_AMTCR EN bit */ + SET_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN); + + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Disable DMA2D dead time feature. + * @param hdma2d DMA2D handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d) +{ + /* Process Locked */ + __HAL_LOCK(hdma2d); + + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Clear DMA2D_AMTCR EN bit */ + CLEAR_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN); + + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Configure dead time. + * @note The dead time value represents the guaranteed minimum number of cycles between + * two consecutive transactions on the AHB bus. + * @param hdma2d DMA2D handle. + * @param DeadTime dead time value. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime) +{ + /* Process Locked */ + __HAL_LOCK(hdma2d); + + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Set DMA2D_AMTCR DT field */ + MODIFY_REG(hdma2d->Instance->AMTCR, DMA2D_AMTCR_DT, (((uint32_t) DeadTime) << DMA2D_AMTCR_DT_Pos)); + + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @} + */ + + +/** @defgroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to: + (+) Get the DMA2D state + (+) Get the DMA2D error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA2D state + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL state + */ +HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d) +{ + return hdma2d->State; +} + +/** + * @brief Return the DMA2D error code + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for DMA2D. + * @retval DMA2D Error Code + */ +uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d) +{ + return hdma2d->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup DMA2D_Private_Functions DMA2D Private Functions + * @{ + */ + +/** + * @brief Set the DMA2D transfer parameters. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the specified DMA2D. + * @param pdata The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param Width The width of data to be transferred from source to destination. + * @param Height The height of data to be transferred from source to destination. + * @retval HAL status + */ +static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height) +{ + uint32_t tmp; + uint32_t tmp1; + uint32_t tmp2; + uint32_t tmp3; + uint32_t tmp4; + + /* Configure DMA2D data size */ + MODIFY_REG(hdma2d->Instance->NLR, (DMA2D_NLR_NL | DMA2D_NLR_PL), (Height | (Width << DMA2D_NLR_PL_Pos))); + + /* Configure DMA2D destination address */ + WRITE_REG(hdma2d->Instance->OMAR, DstAddress); + + /* Register to memory DMA2D mode selected */ + if (hdma2d->Init.Mode == DMA2D_R2M) + { + tmp1 = pdata & DMA2D_OCOLR_ALPHA_1; + tmp2 = pdata & DMA2D_OCOLR_RED_1; + tmp3 = pdata & DMA2D_OCOLR_GREEN_1; + tmp4 = pdata & DMA2D_OCOLR_BLUE_1; + + /* Prepare the value to be written to the OCOLR register according to the color mode */ + if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB8888) + { + tmp = (tmp3 | tmp2 | tmp1 | tmp4); + } + else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB888) + { + tmp = (tmp3 | tmp2 | tmp4); + } + else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB565) + { + tmp2 = (tmp2 >> 19U); + tmp3 = (tmp3 >> 10U); + tmp4 = (tmp4 >> 3U); + tmp = ((tmp3 << 5U) | (tmp2 << 11U) | tmp4); + } + else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB1555) + { + tmp1 = (tmp1 >> 31U); + tmp2 = (tmp2 >> 19U); + tmp3 = (tmp3 >> 11U); + tmp4 = (tmp4 >> 3U); + tmp = ((tmp3 << 5U) | (tmp2 << 10U) | (tmp1 << 15U) | tmp4); + } + else /* Dhdma2d->Init.ColorMode = DMA2D_OUTPUT_ARGB4444 */ + { + tmp1 = (tmp1 >> 28U); + tmp2 = (tmp2 >> 20U); + tmp3 = (tmp3 >> 12U); + tmp4 = (tmp4 >> 4U); + tmp = ((tmp3 << 4U) | (tmp2 << 8U) | (tmp1 << 12U) | tmp4); + } + /* Write to DMA2D OCOLR register */ + WRITE_REG(hdma2d->Instance->OCOLR, tmp); + } + else if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_FG) /*M2M_blending with fixed color FG DMA2D Mode selected*/ + { + WRITE_REG(hdma2d->Instance->BGMAR, pdata); + } + else /* M2M, M2M_PFC,M2M_Blending or M2M_blending with fixed color BG DMA2D Mode */ + { + /* Configure DMA2D source address */ + WRITE_REG(hdma2d->Instance->FGMAR, pdata); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* DMA2D */ +#endif /* HAL_DMA2D_MODULE_ENABLED */ -- cgit v1.2.3