From 86608c6770cf08c138a2bdab5855072f64be09ef Mon Sep 17 00:00:00 2001 From: joshua Date: Sat, 30 Dec 2023 23:54:31 -0500 Subject: initial commit --- .../STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c | 3361 ++++++++++++++++++++ 1 file changed, 3361 insertions(+) create mode 100644 Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c') diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c new file mode 100644 index 0000000..e5990e4 --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c @@ -0,0 +1,3361 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_eth.c + * @author MCD Application Team + * @brief ETH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Ethernet (ETH) peripheral: + * + Initialization and deinitialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The ETH HAL driver can be used as follows: + + (#)Declare a ETH_HandleTypeDef handle structure, for example: + ETH_HandleTypeDef heth; + + (#)Fill parameters of Init structure in heth handle + + (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) + + (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API: + (##) Enable the Ethernet interface clock using + (+++) __HAL_RCC_ETH1MAC_CLK_ENABLE() + (+++) __HAL_RCC_ETH1TX_CLK_ENABLE() + (+++) __HAL_RCC_ETH1RX_CLK_ENABLE() + + (##) Initialize the related GPIO clocks + (##) Configure Ethernet pinout + (##) Configure Ethernet NVIC interrupt (in Interrupt mode) + + (#) Ethernet data reception is asynchronous, so call the following API + to start the listening mode: + (##) HAL_ETH_Start(): + This API starts the MAC and DMA transmission and reception process, + without enabling end of transfer interrupts, in this mode user + has to poll for data reception by calling HAL_ETH_ReadData() + (##) HAL_ETH_Start_IT(): + This API starts the MAC and DMA transmission and reception process, + end of transfer interrupts are enabled in this mode, + HAL_ETH_RxCpltCallback() will be executed when an Ethernet packet is received + + (#) When data is received user can call the following API to get received data: + (##) HAL_ETH_ReadData(): Read a received packet + + (#) For transmission path, two APIs are available: + (##) HAL_ETH_Transmit(): Transmit an ETH frame in blocking mode + (##) HAL_ETH_Transmit_IT(): Transmit an ETH frame in interrupt mode, + HAL_ETH_TxCpltCallback() will be executed when end of transfer occur + + (#) Communication with an external PHY device: + (##) HAL_ETH_ReadPHYRegister(): Read a register from an external PHY + (##) HAL_ETH_WritePHYRegister(): Write data to an external RHY register + + (#) Configure the Ethernet MAC after ETH peripheral initialization + (##) HAL_ETH_GetMACConfig(): Get MAC actual configuration into ETH_MACConfigTypeDef + (##) HAL_ETH_SetMACConfig(): Set MAC configuration based on ETH_MACConfigTypeDef + + (#) Configure the Ethernet DMA after ETH peripheral initialization + (##) HAL_ETH_GetDMAConfig(): Get DMA actual configuration into ETH_DMAConfigTypeDef + (##) HAL_ETH_SetDMAConfig(): Set DMA configuration based on ETH_DMAConfigTypeDef + + (#) Configure the Ethernet PTP after ETH peripheral initialization + (##) Define HAL_ETH_USE_PTP to use PTP APIs. + (##) HAL_ETH_PTP_GetConfig(): Get PTP actual configuration into ETH_PTP_ConfigTypeDef + (##) HAL_ETH_PTP_SetConfig(): Set PTP configuration based on ETH_PTP_ConfigTypeDef + (##) HAL_ETH_PTP_GetTime(): Get Seconds and Nanoseconds for the Ethernet PTP registers + (##) HAL_ETH_PTP_SetTime(): Set Seconds and Nanoseconds for the Ethernet PTP registers + (##) HAL_ETH_PTP_AddTimeOffset(): Add Seconds and Nanoseconds offset for the Ethernet PTP registers + (##) HAL_ETH_PTP_InsertTxTimestamp(): Insert Timestamp in transmission + (##) HAL_ETH_PTP_GetTxTimestamp(): Get transmission timestamp + (##) HAL_ETH_PTP_GetRxTimestamp(): Get reception timestamp + + -@- The ARP offload feature is not supported in this driver. + + -@- The PTP offload feature is not supported in this driver. + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_ETH_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_ETH_RegisterCallback() to register an interrupt callback. + + Function HAL_ETH_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) PMTCallback : Power Management Callback + (+) EEECallback : EEE Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks RxAllocateCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterRxAllocateCallback(). + + For specific callbacks RxLinkCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterRxLinkCallback(). + + For specific callbacks TxFreeCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterTxFreeCallback(). + + For specific callbacks TxPtpCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterTxPtpCallback(). + + Use function HAL_ETH_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_ETH_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) PMTCallback : Power Management Callback + (+) EEECallback : EEE Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + For specific callbacks RxAllocateCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterRxAllocateCallback(). + + For specific callbacks RxLinkCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterRxLinkCallback(). + + For specific callbacks TxFreeCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterTxFreeCallback(). + + For specific callbacks TxPtpCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterTxPtpCallback(). + + By default, after the HAL_ETH_Init and when the state is HAL_ETH_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_ETH_TxCpltCallback(), HAL_ETH_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_ETH_Init/ HAL_ETH_DeInit only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_ETH_Init/ HAL_ETH_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_ETH_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_ETH_STATE_READY or HAL_ETH_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_ETH_RegisterCallback() before calling HAL_ETH_DeInit + or HAL_ETH_Init function. + + When The compilation define USE_HAL_ETH_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ +#ifdef HAL_ETH_MODULE_ENABLED + +#if defined(ETH) + +/** @defgroup ETH ETH + * @brief ETH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup ETH_Private_Constants ETH Private Constants + * @{ + */ +#define ETH_MACCR_MASK 0xFFFB7F7CU +#define ETH_MACECR_MASK 0x3F077FFFU +#define ETH_MACPFR_MASK 0x800007FFU +#define ETH_MACWTR_MASK 0x0000010FU +#define ETH_MACTFCR_MASK 0xFFFF00F2U +#define ETH_MACRFCR_MASK 0x00000003U +#define ETH_MTLTQOMR_MASK 0x00000072U +#define ETH_MTLRQOMR_MASK 0x0000007BU + +#define ETH_DMAMR_MASK 0x00007802U +#define ETH_DMASBMR_MASK 0x0000D001U +#define ETH_DMACCR_MASK 0x00013FFFU +#define ETH_DMACTCR_MASK 0x003F1010U +#define ETH_DMACRCR_MASK 0x803F0000U +#define ETH_MACPCSR_MASK (ETH_MACPCSR_PWRDWN | ETH_MACPCSR_RWKPKTEN | \ + ETH_MACPCSR_MGKPKTEN | ETH_MACPCSR_GLBLUCAST | \ + ETH_MACPCSR_RWKPFE) + +/* Timeout values */ +#define ETH_DMARXNDESCWBF_ERRORS_MASK ((uint32_t)(ETH_DMARXNDESCWBF_DE | ETH_DMARXNDESCWBF_RE | \ + ETH_DMARXNDESCWBF_OE | ETH_DMARXNDESCWBF_RWT |\ + ETH_DMARXNDESCWBF_GP | ETH_DMARXNDESCWBF_CE)) + +#define ETH_MACTSCR_MASK 0x0087FF2FU + +#define ETH_MACSTSUR_VALUE 0xFFFFFFFFU +#define ETH_MACSTNUR_VALUE 0xBB9ACA00U +#define ETH_SEGMENT_SIZE_DEFAULT 0x218U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ETH_Private_Macros ETH Private Macros + * @{ + */ +/* Helper macros for TX descriptor handling */ +#define INCR_TX_DESC_INDEX(inx, offset) do {\ + (inx) += (offset);\ + if ((inx) >= (uint32_t)ETH_TX_DESC_CNT){\ + (inx) = ((inx) - (uint32_t)ETH_TX_DESC_CNT);}\ + } while (0) + +/* Helper macros for RX descriptor handling */ +#define INCR_RX_DESC_INDEX(inx, offset) do {\ + (inx) += (offset);\ + if ((inx) >= (uint32_t)ETH_RX_DESC_CNT){\ + (inx) = ((inx) - (uint32_t)ETH_RX_DESC_CNT);}\ + } while (0) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ETH_Private_Functions ETH Private Functions + * @{ + */ +static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); +static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth); +static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth); +static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth); +static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t ItMode); +static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup ETH_Exported_Functions ETH Exported Functions + * @{ + */ + +/** @defgroup ETH_Exported_Functions_Group1 Initialization and deinitialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the ETH peripheral: + + (+) User must Implement HAL_ETH_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO and NVIC ). + + (+) Call the function HAL_ETH_Init() to configure the selected device with + the selected configuration: + (++) MAC address + (++) Media interface (MII or RMII) + (++) Rx DMA Descriptors Tab + (++) Tx DMA Descriptors Tab + (++) Length of Rx Buffers + + (+) Call the function HAL_ETH_DeInit() to restore the default configuration + of the selected ETH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the Ethernet peripheral registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth) +{ + uint32_t tickstart; + + if (heth == NULL) + { + return HAL_ERROR; + } + if (heth->gState == HAL_ETH_STATE_RESET) + { + heth->gState = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + + ETH_InitCallbacksToDefault(heth); + + if (heth->MspInitCallback == NULL) + { + heth->MspInitCallback = HAL_ETH_MspInit; + } + + /* Init the low level hardware */ + heth->MspInitCallback(heth); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspInit(heth); + +#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ + } + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + if (heth->Init.MediaInterface == HAL_ETH_MII_MODE) + { + HAL_SYSCFG_ETHInterfaceSelect(SYSCFG_ETH_MII); + } + else + { + HAL_SYSCFG_ETHInterfaceSelect(SYSCFG_ETH_RMII); + } + + /* Dummy read to sync with ETH */ + (void)SYSCFG->PMCR; + + /* Ethernet Software reset */ + /* Set the SWR bit: resets all MAC subsystem internal registers and logic */ + /* After reset all the registers holds their respective reset values */ + SET_BIT(heth->Instance->DMAMR, ETH_DMAMR_SWR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for software reset */ + while (READ_BIT(heth->Instance->DMAMR, ETH_DMAMR_SWR) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_SWRESET_TIMEOUT)) + { + /* Set Error Code */ + heth->ErrorCode = HAL_ETH_ERROR_TIMEOUT; + /* Set State as Error */ + heth->gState = HAL_ETH_STATE_ERROR; + /* Return Error */ + return HAL_ERROR; + } + } + + /*------------------ MDIO CSR Clock Range Configuration --------------------*/ + HAL_ETH_SetMDIOClockRange(heth); + + /*------------------ MAC LPI 1US Tic Counter Configuration --------------------*/ + WRITE_REG(heth->Instance->MAC1USTCR, (((uint32_t)HAL_RCC_GetHCLKFreq() / ETH_MAC_US_TICK) - 1U)); + + /*------------------ MAC, MTL and DMA default Configuration ----------------*/ + ETH_MACDMAConfig(heth); + + /* SET DSL to 64 bit */ + MODIFY_REG(heth->Instance->DMACCR, ETH_DMACCR_DSL, ETH_DMACCR_DSL_64BIT); + + /* Set Receive Buffers Length (must be a multiple of 4) */ + if ((heth->Init.RxBuffLen % 0x4U) != 0x0U) + { + /* Set Error Code */ + heth->ErrorCode = HAL_ETH_ERROR_PARAM; + /* Set State as Error */ + heth->gState = HAL_ETH_STATE_ERROR; + /* Return Error */ + return HAL_ERROR; + } + else + { + MODIFY_REG(heth->Instance->DMACRCR, ETH_DMACRCR_RBSZ, ((heth->Init.RxBuffLen) << 1)); + } + + /*------------------ DMA Tx Descriptors Configuration ----------------------*/ + ETH_DMATxDescListInit(heth); + + /*------------------ DMA Rx Descriptors Configuration ----------------------*/ + ETH_DMARxDescListInit(heth); + + /*--------------------- ETHERNET MAC Address Configuration ------------------*/ + /* Set MAC addr bits 32 to 47 */ + heth->Instance->MACA0HR = (((uint32_t)(heth->Init.MACAddr[5]) << 8) | (uint32_t)heth->Init.MACAddr[4]); + /* Set MAC addr bits 0 to 31 */ + heth->Instance->MACA0LR = (((uint32_t)(heth->Init.MACAddr[3]) << 24) | ((uint32_t)(heth->Init.MACAddr[2]) << 16) | + ((uint32_t)(heth->Init.MACAddr[1]) << 8) | (uint32_t)heth->Init.MACAddr[0]); + + heth->ErrorCode = HAL_ETH_ERROR_NONE; + heth->gState = HAL_ETH_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the ETH peripheral. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth) +{ + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + + if (heth->MspDeInitCallback == NULL) + { + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + } + /* DeInit the low level hardware */ + heth->MspDeInitCallback(heth); +#else + + /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspDeInit(heth); + +#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ + + /* Set ETH HAL state to Disabled */ + heth->gState = HAL_ETH_STATE_RESET; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ETH Callback + * To be used instead of the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID + * @arg @ref HAL_ETH_EEE_CB_ID EEE Callback ID + * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, + pETH_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = pCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = pCallback; + break; + + case HAL_ETH_ERROR_CB_ID : + heth->ErrorCallback = pCallback; + break; + + case HAL_ETH_PMT_CB_ID : + heth->PMTCallback = pCallback; + break; + + case HAL_ETH_EEE_CB_ID : + heth->EEECallback = pCallback; + break; + + case HAL_ETH_WAKEUP_CB_ID : + heth->WakeUpCallback = pCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->gState == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an ETH Callback + * ETH callabck is redirected to the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID + * @arg @ref HAL_ETH_EEE_CB_ID EEE Callback ID + * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (heth->gState == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; + break; + + case HAL_ETH_ERROR_CB_ID : + heth->ErrorCallback = HAL_ETH_ErrorCallback; + break; + + case HAL_ETH_PMT_CB_ID : + heth->PMTCallback = HAL_ETH_PMTCallback; + break; + + case HAL_ETH_EEE_CB_ID : + heth->EEECallback = HAL_ETH_EEECallback; + break; + + case HAL_ETH_WAKEUP_CB_ID : + heth->WakeUpCallback = HAL_ETH_WakeUpCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->gState == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group2 IO operation functions + * @brief ETH Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the ETH + data transfer. + +@endverbatim + * @{ + */ + +/** + * @brief Enables Ethernet MAC and DMA reception and transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_READY) + { + heth->gState = HAL_ETH_STATE_BUSY; + + /* Set nombre of descriptors to build */ + heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; + + /* Build all descriptors */ + ETH_UpdateDescriptor(heth); + + /* Enable the MAC transmission */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Enable the MAC reception */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Enable the DMA transmission */ + SET_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Enable the DMA reception */ + SET_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Clear Tx and Rx process stopped flags */ + heth->Instance->DMACSR |= (ETH_DMACSR_TPS | ETH_DMACSR_RPS); + + heth->gState = HAL_ETH_STATE_STARTED; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enables Ethernet MAC and DMA reception/transmission in Interrupt mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_READY) + { + heth->gState = HAL_ETH_STATE_BUSY; + + /* save IT mode to ETH Handle */ + heth->RxDescList.ItMode = 1U; + /* Disable Rx MMC Interrupts */ + SET_BIT(heth->Instance->MMCRIMR, ETH_MMCRIMR_RXLPITRCIM | ETH_MMCRIMR_RXLPIUSCIM | \ + ETH_MMCRIMR_RXUCGPIM | ETH_MMCRIMR_RXALGNERPIM | ETH_MMCRIMR_RXCRCERPIM); + + /* Disable Tx MMC Interrupts */ + SET_BIT(heth->Instance->MMCTIMR, ETH_MMCTIMR_TXLPITRCIM | ETH_MMCTIMR_TXLPIUSCIM | \ + ETH_MMCTIMR_TXGPKTIM | ETH_MMCTIMR_TXMCOLGPIM | ETH_MMCTIMR_TXSCOLGPIM); + + /* Set nombre of descriptors to build */ + heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; + + /* Build all descriptors */ + ETH_UpdateDescriptor(heth); + + /* Enable the MAC transmission */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Enable the MAC reception */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Enable the DMA transmission */ + SET_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Enable the DMA reception */ + SET_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Clear Tx and Rx process stopped flags */ + heth->Instance->DMACSR |= (ETH_DMACSR_TPS | ETH_DMACSR_RPS); + + /* Enable ETH DMA interrupts: + - Tx complete interrupt + - Rx complete interrupt + - Fatal bus interrupt + */ + __HAL_ETH_DMA_ENABLE_IT(heth, (ETH_DMACIER_NIE | ETH_DMACIER_RIE | ETH_DMACIER_TIE | + ETH_DMACIER_FBEE | ETH_DMACIER_AIE | ETH_DMACIER_RBUE)); + + heth->gState = HAL_ETH_STATE_STARTED; + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + /* Disable the DMA transmission */ + CLEAR_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Disable the DMA reception */ + CLEAR_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Disable the MAC reception */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Disable the MAC transmission */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + heth->gState = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission in Interrupt mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmarxdesc; + uint32_t descindex; + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + + /* Disable interrupts: + - Tx complete interrupt + - Rx complete interrupt + - Fatal bus interrupt + */ + __HAL_ETH_DMA_DISABLE_IT(heth, (ETH_DMACIER_NIE | ETH_DMACIER_RIE | ETH_DMACIER_TIE | + ETH_DMACIER_FBEE | ETH_DMACIER_AIE | ETH_DMACIER_RBUE)); + + /* Disable the DMA transmission */ + CLEAR_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Disable the DMA reception */ + CLEAR_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Disable the MAC reception */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Disable the MAC transmission */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Clear IOC bit to all Rx descriptors */ + for (descindex = 0; descindex < (uint32_t)ETH_RX_DESC_CNT; descindex++) + { + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descindex]; + CLEAR_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCRF_IOC); + } + + heth->RxDescList.ItMode = 0U; + + heth->gState = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sends an Ethernet Packet in polling mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Hold the configuration of packet to be transmitted + * @param Timeout: timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t Timeout) +{ + uint32_t tickstart; + ETH_DMADescTypeDef *dmatxdesc; + + if (pTxConfig == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Config DMA Tx descriptor by Tx Packet info */ + if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 0) != HAL_ETH_ERROR_NONE) + { + /* Set the ETH error code */ + heth->ErrorCode |= HAL_ETH_ERROR_BUSY; + return HAL_ERROR; + } + + /* Ensure completion of descriptor preparation before transmission start */ + __DSB(); + + dmatxdesc = (ETH_DMADescTypeDef *)(&heth->TxDescList)->TxDesc[heth->TxDescList.CurTxDesc]; + + /* Incr current tx desc index */ + INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); + + /* Start transmission */ + /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); + + tickstart = HAL_GetTick(); + + /* Wait for data to be transmitted or timeout occurred */ + while ((dmatxdesc->DESC3 & ETH_DMATXNDESCWBF_OWN) != (uint32_t)RESET) + { + if ((heth->Instance->DMACSR & ETH_DMACSR_FBE) != (uint32_t)RESET) + { + heth->ErrorCode |= HAL_ETH_ERROR_DMA; + heth->DMAErrorCode = heth->Instance->DMACSR; + /* Return function status */ + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + heth->ErrorCode |= HAL_ETH_ERROR_TIMEOUT; + /* Clear TX descriptor so that we can proceed */ + dmatxdesc->DESC3 = (ETH_DMATXNDESCWBF_FD | ETH_DMATXNDESCWBF_LD); + return HAL_ERROR; + } + } + } + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sends an Ethernet Packet in interrupt mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Hold the configuration of packet to be transmitted + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig) +{ + if (pTxConfig == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Save the packet pointer to release. */ + heth->TxDescList.CurrentPacketAddress = (uint32_t *)pTxConfig->pData; + + /* Config DMA Tx descriptor by Tx Packet info */ + if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 1) != HAL_ETH_ERROR_NONE) + { + heth->ErrorCode |= HAL_ETH_ERROR_BUSY; + return HAL_ERROR; + } + + /* Ensure completion of descriptor preparation before transmission start */ + __DSB(); + + /* Incr current tx desc index */ + INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); + + /* Start transmission */ + /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); + + return HAL_OK; + + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Read a received packet. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pAppBuff: Pointer to an application buffer to receive the packet. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff) +{ + uint32_t descidx; + ETH_DMADescTypeDef *dmarxdesc; + uint32_t desccnt = 0U; + uint32_t desccntmax; + uint32_t bufflength; + uint8_t rxdataready = 0U; + + + if (pAppBuff == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState != HAL_ETH_STATE_STARTED) + { + return HAL_ERROR; + } + + descidx = heth->RxDescList.RxDescIdx; + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccntmax = ETH_RX_DESC_CNT - heth->RxDescList.RxBuildDescCnt; + + /* Check if descriptor is not owned by DMA */ + while ((READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_OWN) == (uint32_t)RESET) && (desccnt < desccntmax) + && (rxdataready == 0U)) + { + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_CTXT) != (uint32_t)RESET) + { + /* Get timestamp high */ + heth->RxDescList.TimeStamp.TimeStampHigh = dmarxdesc->DESC1; + /* Get timestamp low */ + heth->RxDescList.TimeStamp.TimeStampLow = dmarxdesc->DESC0; + } + if ((READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_FD) != (uint32_t)RESET) || (heth->RxDescList.pRxStart != NULL)) + { + /* Check if first descriptor */ + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_FD) != (uint32_t)RESET) + { + heth->RxDescList.RxDescCnt = 0; + heth->RxDescList.RxDataLength = 0; + } + + /* Check if last descriptor */ + bufflength = heth->Init.RxBuffLen; + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_LD) != (uint32_t)RESET) + { + bufflength = READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_PL) - heth->RxDescList.RxDataLength; + + /* Save Last descriptor index */ + heth->RxDescList.pRxLastRxDesc = dmarxdesc->DESC3; + + /* Packet ready */ + rxdataready = 1; + } + + /* Link data */ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Link callback*/ + heth->rxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, + (uint8_t *)dmarxdesc->BackupAddr0, bufflength); +#else + /* Link callback */ + HAL_ETH_RxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, + (uint8_t *)dmarxdesc->BackupAddr0, (uint16_t) bufflength); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + heth->RxDescList.RxDescCnt++; + heth->RxDescList.RxDataLength += bufflength; + + /* Clear buffer pointer */ + dmarxdesc->BackupAddr0 = 0; + } + + /* Increment current rx descriptor index */ + INCR_RX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccnt++; + } + + heth->RxDescList.RxBuildDescCnt += desccnt; + if ((heth->RxDescList.RxBuildDescCnt) != 0U) + { + /* Update Descriptors */ + ETH_UpdateDescriptor(heth); + } + + heth->RxDescList.RxDescIdx = descidx; + + if (rxdataready == 1U) + { + /* Return received packet */ + *pAppBuff = heth->RxDescList.pRxStart; + /* Reset first element */ + heth->RxDescList.pRxStart = NULL; + + return HAL_OK; + } + + /* Packet not ready */ + return HAL_ERROR; +} + +/** + * @brief This function gives back Rx Desc of the last received Packet + * to the DMA, so ETH DMA will be able to use these descriptors + * to receive next Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth) +{ + uint32_t descidx; + uint32_t desccount; + ETH_DMADescTypeDef *dmarxdesc; + uint8_t *buff = NULL; + uint8_t allocStatus = 1U; + + descidx = heth->RxDescList.RxBuildDescIdx; + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccount = heth->RxDescList.RxBuildDescCnt; + + while ((desccount > 0U) && (allocStatus != 0U)) + { + /* Check if a buffer's attached the descriptor */ + if (READ_REG(dmarxdesc->BackupAddr0) == 0U) + { + /* Get a new buffer. */ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Allocate callback*/ + heth->rxAllocateCallback(&buff); +#else + /* Allocate callback */ + HAL_ETH_RxAllocateCallback(&buff); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + if (buff == NULL) + { + allocStatus = 0U; + } + else + { + WRITE_REG(dmarxdesc->BackupAddr0, (uint32_t)buff); + WRITE_REG(dmarxdesc->DESC0, (uint32_t)buff); + } + } + + if (allocStatus != 0U) + { + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + + if (heth->RxDescList.ItMode != 0U) + { + WRITE_REG(dmarxdesc->DESC3, ETH_DMARXNDESCRF_OWN | ETH_DMARXNDESCRF_BUF1V | ETH_DMARXNDESCRF_IOC); + } + else + { + WRITE_REG(dmarxdesc->DESC3, ETH_DMARXNDESCRF_OWN | ETH_DMARXNDESCRF_BUF1V); + } + + /* Increment current rx descriptor index */ + INCR_RX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccount--; + } + } + + if (heth->RxDescList.RxBuildDescCnt != desccount) + { + /* Set the Tail pointer address */ + WRITE_REG(heth->Instance->DMACRDTPR, 0); + + heth->RxDescList.RxBuildDescIdx = descidx; + heth->RxDescList.RxBuildDescCnt = desccount; + } +} + +/** + * @brief Register the Rx alloc callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param rxAllocateCallback: pointer to function to alloc buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, + pETH_rxAllocateCallbackTypeDef rxAllocateCallback) +{ + if (rxAllocateCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to allocate buffer */ + heth->rxAllocateCallback = rxAllocateCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Rx alloc callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; + + return HAL_OK; +} + +/** + * @brief Rx Allocate callback. + * @param buff: pointer to allocated buffer + * @retval None + */ +__weak void HAL_ETH_RxAllocateCallback(uint8_t **buff) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxAllocateCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Link callback. + * @param pStart: pointer to packet start + * @param pStart: pointer to packet end + * @param buff: pointer to received data + * @param Length: received data length + * @retval None + */ +__weak void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(pStart); + UNUSED(pEnd); + UNUSED(buff); + UNUSED(Length); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxLinkCallback could be implemented in the user file + */ +} + +/** + * @brief Set the Rx link data function. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param rxLinkCallback: pointer to function to link data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback) +{ + if (rxLinkCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to link data */ + heth->rxLinkCallback = rxLinkCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Rx link callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->rxLinkCallback = HAL_ETH_RxLinkCallback; + + return HAL_OK; +} + +/** + * @brief Get the error state of the last received packet. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pErrorCode: pointer to uint32_t to hold the error code + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(ETH_HandleTypeDef *heth, uint32_t *pErrorCode) +{ + /* Get error bits. */ + *pErrorCode = READ_BIT(heth->RxDescList.pRxLastRxDesc, ETH_DMARXNDESCWBF_ERRORS_MASK); + + return HAL_OK; +} + +/** + * @brief Set the Tx free function. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txFreeCallback: pointer to function to release the packet + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback) +{ + if (txFreeCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to free transmmitted packet */ + heth->txFreeCallback = txFreeCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Tx free callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->txFreeCallback = HAL_ETH_TxFreeCallback; + + return HAL_OK; +} + +/** + * @brief Tx Free callback. + * @param buff: pointer to buffer to free + * @retval None + */ +__weak void HAL_ETH_TxFreeCallback(uint32_t *buff) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxFreeCallback could be implemented in the user file + */ +} + +/** + * @brief Release transmitted Tx packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t numOfBuf = dmatxdesclist->BuffersInUse; + uint32_t idx = dmatxdesclist->releaseIndex; + uint8_t pktTxStatus = 1U; + uint8_t pktInUse; +#ifdef HAL_ETH_USE_PTP + ETH_TimeStampTypeDef *timestamp = &heth->TxTimestamp; +#endif /* HAL_ETH_USE_PTP */ + + /* Loop through buffers in use. */ + while ((numOfBuf != 0U) && (pktTxStatus != 0U)) + { + pktInUse = 1U; + numOfBuf--; + /* If no packet, just examine the next packet. */ + if (dmatxdesclist->PacketAddress[idx] == NULL) + { + /* No packet in use, skip to next. */ + idx = (idx + 1U) & (ETH_TX_DESC_CNT - 1U); + pktInUse = 0U; + } + + if (pktInUse != 0U) + { + /* Determine if the packet has been transmitted. */ + if ((heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCRF_OWN) == 0U) + { +#ifdef HAL_ETH_USE_PTP + /* Disable Ptp transmission */ + CLEAR_BIT(heth->Init.TxDesc[idx].DESC3, (0x40000000U)); + + /* Get timestamp low */ + timestamp->TimeStampLow = heth->Init.TxDesc[idx].DESC0; + /* Get timestamp high */ + timestamp->TimeStampHigh = heth->Init.TxDesc[idx].DESC1; +#endif /* HAL_ETH_USE_PTP */ + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered callbacks*/ +#ifdef HAL_ETH_USE_PTP + /* Handle Ptp */ + heth->txPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); +#endif /* HAL_ETH_USE_PTP */ + /* Release the packet. */ + heth->txFreeCallback(dmatxdesclist->PacketAddress[idx]); +#else + /* Call callbacks */ +#ifdef HAL_ETH_USE_PTP + /* Handle Ptp */ + HAL_ETH_TxPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); +#endif /* HAL_ETH_USE_PTP */ + /* Release the packet. */ + HAL_ETH_TxFreeCallback(dmatxdesclist->PacketAddress[idx]); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + /* Clear the entry in the in-use array. */ + dmatxdesclist->PacketAddress[idx] = NULL; + + /* Update the transmit relesae index and number of buffers in use. */ + idx = (idx + 1U) & (ETH_TX_DESC_CNT - 1U); + dmatxdesclist->BuffersInUse = numOfBuf; + dmatxdesclist->releaseIndex = idx; + } + else + { + /* Get out of the loop! */ + pktTxStatus = 0U; + } + } + } + return HAL_OK; +} + +#ifdef HAL_ETH_USE_PTP +/** + * @brief Set the Ethernet PTP configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains + * the configuration information for PTP + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) +{ + uint32_t tmpTSCR; + ETH_TimeTypeDef time; + + if (ptpconfig == NULL) + { + return HAL_ERROR; + } + + tmpTSCR = ptpconfig->Timestamp | + ((uint32_t)ptpconfig->TimestampUpdate << ETH_MACTSCR_TSUPDT_Pos) | + ((uint32_t)ptpconfig->TimestampAll << ETH_MACTSCR_TSENALL_Pos) | + ((uint32_t)ptpconfig->TimestampRolloverMode << ETH_MACTSCR_TSCTRLSSR_Pos) | + ((uint32_t)ptpconfig->TimestampV2 << ETH_MACTSCR_TSVER2ENA_Pos) | + ((uint32_t)ptpconfig->TimestampEthernet << ETH_MACTSCR_TSIPENA_Pos) | + ((uint32_t)ptpconfig->TimestampIPv6 << ETH_MACTSCR_TSIPV6ENA_Pos) | + ((uint32_t)ptpconfig->TimestampIPv4 << ETH_MACTSCR_TSIPV4ENA_Pos) | + ((uint32_t)ptpconfig->TimestampEvent << ETH_MACTSCR_TSEVNTENA_Pos) | + ((uint32_t)ptpconfig->TimestampMaster << ETH_MACTSCR_TSMSTRENA_Pos) | + ((uint32_t)ptpconfig->TimestampSnapshots << ETH_MACTSCR_SNAPTYPSEL_Pos) | + ((uint32_t)ptpconfig->TimestampFilter << ETH_MACTSCR_TSENMACADDR_Pos) | + ((uint32_t)ptpconfig->TimestampChecksumCorrection << ETH_MACTSCR_CSC_Pos) | + ((uint32_t)ptpconfig->TimestampStatusMode << ETH_MACTSCR_TXTSSTSM_Pos); + + /* Write to MACTSCR */ + MODIFY_REG(heth->Instance->MACTSCR, ETH_MACTSCR_MASK, tmpTSCR); + + /* Enable Timestamp */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSENA); + WRITE_REG(heth->Instance->MACSSIR, ptpconfig->TimestampSubsecondInc); + WRITE_REG(heth->Instance->MACTSAR, ptpconfig->TimestampAddend); + + /* Enable Timestamp */ + if (ptpconfig->TimestampAddendUpdate == ENABLE) + { + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSADDREG); + while ((heth->Instance->MACTSCR & ETH_MACTSCR_TSADDREG) != 0) {} + } + + /* Enable Update mode */ + if (ptpconfig->TimestampUpdateMode == ENABLE) + { + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSCFUPDT); + } + + /* Initialize Time */ + time.Seconds = 0; + time.NanoSeconds = 0; + HAL_ETH_PTP_SetTime(heth, &time); + + /* Ptp Init */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSINIT); + + /* Set PTP Configuration done */ + heth->IsPtpConfigured = HAL_ETH_PTP_CONFIGURATED; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get the Ethernet PTP configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains + * the configuration information for PTP + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) +{ + if (ptpconfig == NULL) + { + return HAL_ERROR; + } + ptpconfig->Timestamp = READ_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSENA); + ptpconfig->TimestampUpdate = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSCFUPDT) >> ETH_MACTSCR_TSUPDT_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampAll = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSENALL) >> ETH_MACTSCR_TSENALL_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampRolloverMode = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSCTRLSSR) >> ETH_MACTSCR_TSCTRLSSR_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampV2 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSVER2ENA) >> ETH_MACTSCR_TSVER2ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampEthernet = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPENA) >> ETH_MACTSCR_TSIPENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampIPv6 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPV6ENA) >> ETH_MACTSCR_TSIPV6ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampIPv4 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPV4ENA) >> ETH_MACTSCR_TSIPV4ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampEvent = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSEVNTENA) >> ETH_MACTSCR_TSEVNTENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampMaster = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSMSTRENA) >> ETH_MACTSCR_TSMSTRENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampSnapshots = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_SNAPTYPSEL) >> ETH_MACTSCR_SNAPTYPSEL_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampFilter = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSENMACADDR) >> ETH_MACTSCR_TSENMACADDR_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampChecksumCorrection = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_CSC) >> ETH_MACTSCR_CSC_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampStatusMode = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TXTSSTSM) >> ETH_MACTSCR_TXTSSTSM_Pos) > 0U) + ? ENABLE : DISABLE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set Seconds and Nanoseconds for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param heth: pointer to a ETH_TimeTypeDef structure that contains + * time to set + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) + { + /* Set Seconds */ + heth->Instance->MACSTSUR = time->Seconds; + + /* Set NanoSeconds */ + heth->Instance->MACSTNUR = time->NanoSeconds; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get Seconds and Nanoseconds for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param heth: pointer to a ETH_TimeTypeDef structure that contains + * time to get + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) + { + /* Get Seconds */ + time->Seconds = heth->Instance->MACSTSUR; + + /* Get NanoSeconds */ + time->NanoSeconds = heth->Instance->MACSTNUR; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Update time for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timeupdate: pointer to a ETH_TIMEUPDATETypeDef structure that contains + * the time update information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, + ETH_TimeTypeDef *timeoffset) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) + { + if (ptpoffsettype == HAL_ETH_PTP_NEGATIVE_UPDATE) + { + /* Set Seconds update */ + heth->Instance->MACSTSUR = ETH_MACSTSUR_VALUE - timeoffset->Seconds + 1U; + + if (READ_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSCTRLSSR) == ETH_MACTSCR_TSCTRLSSR) + { + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = ETH_MACSTNUR_VALUE - timeoffset->NanoSeconds; + } + else + { + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = ETH_MACSTSUR_VALUE - timeoffset->NanoSeconds + 1U; + } + } + else + { + /* Set Seconds update */ + heth->Instance->MACSTSUR = timeoffset->Seconds; + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = timeoffset->NanoSeconds; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Insert Timestamp in transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txtimestampconf: Enable or Disable timestamp in transmission + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t descidx = dmatxdesclist->CurTxDesc; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) + { + /* Enable Time Stamp transmission */ + SET_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_TTSE); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get transmission timestamp. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains + * transmission timestamp + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t idx = dmatxdesclist->releaseIndex; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[idx]; + + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) + { + /* Get timestamp low */ + timestamp->TimeStampLow = dmatxdesc->DESC0; + /* Get timestamp high */ + timestamp->TimeStampHigh = dmatxdesc->DESC1; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get receive timestamp. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains + * receive timestamp + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) + { + /* Get timestamp low */ + timestamp->TimeStampLow = heth->RxDescList.TimeStamp.TimeStampLow; + /* Get timestamp high */ + timestamp->TimeStampHigh = heth->RxDescList.TimeStamp.TimeStampHigh; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Register the Tx Ptp callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txPtpCallback: Function to handle Ptp transmission + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback) +{ + if (txPtpCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + /* Set Function to handle Tx Ptp */ + heth->txPtpCallback = txPtpCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Tx Ptp callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->txPtpCallback = HAL_ETH_TxPtpCallback; + + return HAL_OK; +} + +/** + * @brief Tx Ptp callback. + * @param buff: pointer to application buffer + * @retval None + */ +__weak void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxPtpCallback could be implemented in the user file + */ +} +#endif /* HAL_ETH_USE_PTP */ + +/** + * @brief This function handles ETH interrupt request. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth) +{ + uint32_t macirqenable; + /* Packet received */ + if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMACSR_RI)) + { + if (__HAL_ETH_DMA_GET_IT_SOURCE(heth, ETH_DMACIER_RIE)) + { + /* Clear the Eth DMA Rx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMACSR_RI | ETH_DMACSR_NIS); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Receive complete callback*/ + heth->RxCpltCallback(heth); +#else + /* Receive complete callback */ + HAL_ETH_RxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + } + + /* Packet transmitted */ + if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMACSR_TI)) + { + if (__HAL_ETH_DMA_GET_IT_SOURCE(heth, ETH_DMACIER_TIE)) + { + /* Clear the Eth DMA Tx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMACSR_TI | ETH_DMACSR_NIS); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Transmit complete callback*/ + heth->TxCpltCallback(heth); +#else + /* Transfer complete callback */ + HAL_ETH_TxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + } + + + /* ETH DMA Error */ + if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMACSR_AIS)) + { + if (__HAL_ETH_DMA_GET_IT_SOURCE(heth, ETH_DMACIER_AIE)) + { + heth->ErrorCode |= HAL_ETH_ERROR_DMA; + + /* if fatal bus error occurred */ + if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMACSR_FBE)) + { + /* Get DMA error code */ + heth->DMAErrorCode = READ_BIT(heth->Instance->DMACSR, (ETH_DMACSR_FBE | ETH_DMACSR_TPS | ETH_DMACSR_RPS)); + + /* Disable all interrupts */ + __HAL_ETH_DMA_DISABLE_IT(heth, ETH_DMACIER_NIE | ETH_DMACIER_AIE); + + /* Set HAL state to ERROR */ + heth->gState = HAL_ETH_STATE_ERROR; + } + else + { + /* Get DMA error status */ + heth->DMAErrorCode = READ_BIT(heth->Instance->DMACSR, (ETH_DMACSR_CDE | ETH_DMACSR_ETI | ETH_DMACSR_RWT | + ETH_DMACSR_RBU | ETH_DMACSR_AIS)); + + /* Clear the interrupt summary flag */ + __HAL_ETH_DMA_CLEAR_IT(heth, (ETH_DMACSR_CDE | ETH_DMACSR_ETI | ETH_DMACSR_RWT | + ETH_DMACSR_RBU | ETH_DMACSR_AIS)); + } +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered Error callback*/ + heth->ErrorCallback(heth); +#else + /* Ethernet DMA Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + } + } + + /* ETH MAC Error IT */ + macirqenable = heth->Instance->MACIER; + if (((macirqenable & ETH_MACIER_RXSTSIE) == ETH_MACIER_RXSTSIE) || \ + ((macirqenable & ETH_MACIER_TXSTSIE) == ETH_MACIER_TXSTSIE)) + { + heth->ErrorCode |= HAL_ETH_ERROR_MAC; + + /* Get MAC Rx Tx status and clear Status register pending bit */ + heth->MACErrorCode = READ_REG(heth->Instance->MACRXTXSR); + + heth->gState = HAL_ETH_STATE_ERROR; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered Error callback*/ + heth->ErrorCallback(heth); +#else + /* Ethernet Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACErrorCode = (uint32_t)(0x0U); + } + + /* ETH PMT IT */ + if (__HAL_ETH_MAC_GET_IT(heth, ETH_MAC_PMT_IT)) + { + /* Get MAC Wake-up source and clear the status register pending bit */ + heth->MACWakeUpEvent = READ_BIT(heth->Instance->MACPCSR, (ETH_MACPCSR_RWKPRCVD | ETH_MACPCSR_MGKPRCVD)); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered PMT callback*/ + heth->PMTCallback(heth); +#else + /* Ethernet PMT callback */ + HAL_ETH_PMTCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACWakeUpEvent = (uint32_t)(0x0U); + } + + /* ETH EEE IT */ + if (__HAL_ETH_MAC_GET_IT(heth, ETH_MAC_LPI_IT)) + { + /* Get MAC LPI interrupt source and clear the status register pending bit */ + heth->MACLPIEvent = READ_BIT(heth->Instance->MACPCSR, 0x0000000FU); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered EEE callback*/ + heth->EEECallback(heth); +#else + /* Ethernet EEE callback */ + HAL_ETH_EEECallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACLPIEvent = (uint32_t)(0x0U); + } + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* check ETH WAKEUP exti flag */ + if (__HAL_ETH_WAKEUP_EXTI_GET_FLAG(ETH_WAKEUP_EXTI_LINE) != (uint32_t)RESET) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + } + else + { + /* check ETH WAKEUP exti flag */ + if (__HAL_ETH_WAKEUP_EXTID2_GET_FLAG(ETH_WAKEUP_EXTI_LINE) != (uint32_t)RESET) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTID2_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + } +#else /* USE_HAL_ETH_REGISTER_CALLBACKS */ + /* check ETH WAKEUP exti flag */ + if (__HAL_ETH_WAKEUP_EXTI_GET_FLAG(ETH_WAKEUP_EXTI_LINE) != (uint32_t)RESET) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ +} + +/** + * @brief Tx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet transfer error callbacks + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet Power Management module IT callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_PMTCallback could be implemented in the user file + */ +} + +/** + * @brief Energy Efficient Etherent IT callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_EEECallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_EEECallback could be implemented in the user file + */ +} + +/** + * @brief ETH WAKEUP interrupt callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_WakeUpCallback could be implemented in the user file + */ +} + +/** + * @brief Read a PHY register + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYAddr: PHY port address, must be a value from 0 to 31 + * @param PHYReg: PHY register address, must be a value from 0 to 31 + * @param pRegValue: parameter to hold read value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t *pRegValue) +{ + uint32_t tickstart; + uint32_t tmpreg; + + /* Check for the Busy flag */ + if (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) != (uint32_t)RESET) + { + return HAL_ERROR; + } + + /* Get the MACMDIOAR value */ + WRITE_REG(tmpreg, heth->Instance->MACMDIOAR); + + /* Prepare the MDIO Address Register value + - Set the PHY device address + - Set the PHY register address + - Set the read mode + - Set the MII Busy bit */ + + MODIFY_REG(tmpreg, ETH_MACMDIOAR_PA, (PHYAddr << 21)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_RDA, (PHYReg << 16)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_MOC, ETH_MACMDIOAR_MOC_RD); + SET_BIT(tmpreg, ETH_MACMDIOAR_MB); + + /* Write the result value into the MDII Address register */ + WRITE_REG(heth->Instance->MACMDIOAR, tmpreg); + + tickstart = HAL_GetTick(); + + /* Wait for the Busy flag */ + while (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_MDIO_BUS_TIMEOUT)) + { + return HAL_ERROR; + } + } + + /* Get MACMIIDR value */ + WRITE_REG(*pRegValue, (uint16_t)heth->Instance->MACMDIODR); + + return HAL_OK; +} + + +/** + * @brief Writes to a PHY register. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYAddr: PHY port address, must be a value from 0 to 31 + * @param PHYReg: PHY register address, must be a value from 0 to 31 + * @param RegValue: the value to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t RegValue) +{ + uint32_t tickstart; + uint32_t tmpreg; + + /* Check for the Busy flag */ + if (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) != (uint32_t)RESET) + { + return HAL_ERROR; + } + + /* Get the MACMDIOAR value */ + WRITE_REG(tmpreg, heth->Instance->MACMDIOAR); + + /* Prepare the MDIO Address Register value + - Set the PHY device address + - Set the PHY register address + - Set the write mode + - Set the MII Busy bit */ + + MODIFY_REG(tmpreg, ETH_MACMDIOAR_PA, (PHYAddr << 21)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_RDA, (PHYReg << 16)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_MOC, ETH_MACMDIOAR_MOC_WR); + SET_BIT(tmpreg, ETH_MACMDIOAR_MB); + + + /* Give the value to the MII data register */ + WRITE_REG(ETH->MACMDIODR, (uint16_t)RegValue); + + /* Write the result value into the MII Address register */ + WRITE_REG(ETH->MACMDIOAR, tmpreg); + + tickstart = HAL_GetTick(); + + /* Wait for the Busy flag */ + while (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_MDIO_BUS_TIMEOUT)) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions + * @brief ETH control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the ETH + peripheral. + +@endverbatim + * @{ + */ +/** + * @brief Get the configuration of the MAC and MTL subsystems. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: pointer to a ETH_MACConfigTypeDef structure that will hold + * the configuration of the MAC. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETH_GetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + if (macconf == NULL) + { + return HAL_ERROR; + } + + /* Get MAC parameters */ + macconf->PreambleLength = READ_BIT(heth->Instance->MACCR, ETH_MACCR_PRELEN); + macconf->DeferralCheck = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DC) >> 4) > 0U) ? ENABLE : DISABLE; + macconf->BackOffLimit = READ_BIT(heth->Instance->MACCR, ETH_MACCR_BL); + macconf->RetryTransmission = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DR) >> 8) == 0U) ? ENABLE : DISABLE; + macconf->CarrierSenseDuringTransmit = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DCRS) >> 9) > 0U) + ? ENABLE : DISABLE; + macconf->ReceiveOwn = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DO) >> 10) == 0U) ? ENABLE : DISABLE; + macconf->CarrierSenseBeforeTransmit = ((READ_BIT(heth->Instance->MACCR, + ETH_MACCR_ECRSFD) >> 11) > 0U) ? ENABLE : DISABLE; + macconf->LoopbackMode = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_LM) >> 12) > 0U) ? ENABLE : DISABLE; + macconf->DuplexMode = READ_BIT(heth->Instance->MACCR, ETH_MACCR_DM); + macconf->Speed = READ_BIT(heth->Instance->MACCR, ETH_MACCR_FES); + macconf->JumboPacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JE) >> 16) > 0U) ? ENABLE : DISABLE; + macconf->Jabber = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JD) >> 17) == 0U) ? ENABLE : DISABLE; + macconf->Watchdog = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_WD) >> 19) == 0U) ? ENABLE : DISABLE; + macconf->AutomaticPadCRCStrip = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_ACS) >> 20) > 0U) ? ENABLE : DISABLE; + macconf->CRCStripTypePacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_CST) >> 21) > 0U) ? ENABLE : DISABLE; + macconf->Support2KPacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_S2KP) >> 22) > 0U) ? ENABLE : DISABLE; + macconf->GiantPacketSizeLimitControl = ((READ_BIT(heth->Instance->MACCR, + ETH_MACCR_GPSLCE) >> 23) > 0U) ? ENABLE : DISABLE; + macconf->InterPacketGapVal = READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPG); + macconf->ChecksumOffload = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPC) >> 27) > 0U) ? ENABLE : DISABLE; + macconf->SourceAddrControl = READ_BIT(heth->Instance->MACCR, ETH_MACCR_SARC); + + macconf->GiantPacketSizeLimit = READ_BIT(heth->Instance->MACECR, ETH_MACECR_GPSL); + macconf->CRCCheckingRxPackets = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_DCRCC) >> 16) == 0U) ? ENABLE : DISABLE; + macconf->SlowProtocolDetect = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_SPEN) >> 17) > 0U) ? ENABLE : DISABLE; + macconf->UnicastSlowProtocolPacketDetect = ((READ_BIT(heth->Instance->MACECR, + ETH_MACECR_USP) >> 18) > 0U) ? ENABLE : DISABLE; + macconf->ExtendedInterPacketGap = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_EIPGEN) >> 24) > 0U) + ? ENABLE : DISABLE; + macconf->ExtendedInterPacketGapVal = READ_BIT(heth->Instance->MACECR, ETH_MACECR_EIPG) >> 25; + + + macconf->ProgrammableWatchdog = ((READ_BIT(heth->Instance->MACWTR, ETH_MACWTR_PWE) >> 8) > 0U) ? ENABLE : DISABLE; + macconf->WatchdogTimeout = READ_BIT(heth->Instance->MACWTR, ETH_MACWTR_WTO); + + macconf->TransmitFlowControl = ((READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_TFE) >> 1) > 0U) ? ENABLE : DISABLE; + macconf->ZeroQuantaPause = ((READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_DZPQ) >> 7) == 0U) ? ENABLE : DISABLE; + macconf->PauseLowThreshold = READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_PLT); + macconf->PauseTime = (READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_PT) >> 16); + + + macconf->ReceiveFlowControl = (READ_BIT(heth->Instance->MACRFCR, ETH_MACRFCR_RFE) > 0U) ? ENABLE : DISABLE; + macconf->UnicastPausePacketDetect = ((READ_BIT(heth->Instance->MACRFCR, ETH_MACRFCR_UP) >> 1) > 0U) + ? ENABLE : DISABLE; + + macconf->TransmitQueueMode = READ_BIT(heth->Instance->MTLTQOMR, (ETH_MTLTQOMR_TTC | ETH_MTLTQOMR_TSF)); + + macconf->ReceiveQueueMode = READ_BIT(heth->Instance->MTLRQOMR, (ETH_MTLRQOMR_RTC | ETH_MTLRQOMR_RSF)); + macconf->ForwardRxUndersizedGoodPacket = ((READ_BIT(heth->Instance->MTLRQOMR, + ETH_MTLRQOMR_FUP) >> 3) > 0U) ? ENABLE : DISABLE; + macconf->ForwardRxErrorPacket = ((READ_BIT(heth->Instance->MTLRQOMR, ETH_MTLRQOMR_FEP) >> 4) > 0U) ? ENABLE : DISABLE; + macconf->DropTCPIPChecksumErrorPacket = ((READ_BIT(heth->Instance->MTLRQOMR, + ETH_MTLRQOMR_DISTCPEF) >> 6) == 0U) ? ENABLE : DISABLE; + + return HAL_OK; +} + +/** + * @brief Get the configuration of the DMA. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold + * the configuration of the ETH DMA. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETH_GetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + if (dmaconf == NULL) + { + return HAL_ERROR; + } + + dmaconf->AddressAlignedBeats = ((READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_AAL) >> 12) > 0U) ? ENABLE : DISABLE; + dmaconf->BurstMode = READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_FB | ETH_DMASBMR_MB); + dmaconf->RebuildINCRxBurst = ((READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_RB) >> 15) > 0U) ? ENABLE : DISABLE; + + dmaconf->DMAArbitration = READ_BIT(heth->Instance->DMAMR, (ETH_DMAMR_TXPR | ETH_DMAMR_PR | ETH_DMAMR_DA)); + + dmaconf->PBLx8Mode = ((READ_BIT(heth->Instance->DMACCR, ETH_DMACCR_8PBL) >> 16) > 0U) ? ENABLE : DISABLE; + dmaconf->MaximumSegmentSize = READ_BIT(heth->Instance->DMACCR, ETH_DMACCR_MSS); + + dmaconf->FlushRxPacket = ((READ_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_RPF) >> 31) > 0U) ? ENABLE : DISABLE; + dmaconf->RxDMABurstLength = READ_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_RPBL); + + dmaconf->SecondPacketOperate = ((READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_OSP) >> 4) > 0U) ? ENABLE : DISABLE; + dmaconf->TCPSegmentation = ((READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_TSE) >> 12) > 0U) ? ENABLE : DISABLE; + dmaconf->TxDMABurstLength = READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_TPBL); + return HAL_OK; +} + +/** + * @brief Set the MAC configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: pointer to a ETH_MACConfigTypeDef structure that contains + * the configuration of the MAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + if (macconf == NULL) + { + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + ETH_SetMACConfig(heth, macconf); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Set the ETH DMA configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold + * the configuration of the ETH DMA. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + if (dmaconf == NULL) + { + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + ETH_SetDMAConfig(heth, dmaconf); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configures the Clock range of ETH MDIO interface. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth) +{ + uint32_t hclk; + uint32_t tmpreg; + + /* Get the ETHERNET MACMDIOAR value */ + tmpreg = (heth->Instance)->MACMDIOAR; + + /* Clear CSR Clock Range bits */ + tmpreg &= ~ETH_MACMDIOAR_CR; + + /* Get hclk frequency value */ + hclk = HAL_RCC_GetHCLKFreq(); + + /* Set CR bits depending on hclk value */ + if ((hclk >= 20000000U) && (hclk < 35000000U)) + { + /* CSR Clock Range between 20-35 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV16; + } + else if ((hclk >= 35000000U) && (hclk < 60000000U)) + { + /* CSR Clock Range between 35-60 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV26; + } + else if ((hclk >= 60000000U) && (hclk < 100000000U)) + { + /* CSR Clock Range between 60-100 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV42; + } + else if ((hclk >= 100000000U) && (hclk < 150000000U)) + { + /* CSR Clock Range between 100-150 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV62; + } + else /* (hclk >= 150000000)&&(hclk <= 200000000) */ + { + /* CSR Clock Range between 150-200 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV102; + } + + /* Configure the CSR Clock Range */ + (heth->Instance)->MACMDIOAR = (uint32_t)tmpreg; +} + +/** + * @brief Set the ETH MAC (L2) Filters configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that contains + * the configuration of the ETH MAC filters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig) +{ + uint32_t filterconfig; + + if (pFilterConfig == NULL) + { + return HAL_ERROR; + } + + filterconfig = ((uint32_t)pFilterConfig->PromiscuousMode | + ((uint32_t)pFilterConfig->HashUnicast << 1) | + ((uint32_t)pFilterConfig->HashMulticast << 2) | + ((uint32_t)pFilterConfig->DestAddrInverseFiltering << 3) | + ((uint32_t)pFilterConfig->PassAllMulticast << 4) | + ((uint32_t)((pFilterConfig->BroadcastFilter == DISABLE) ? 1U : 0U) << 5) | + ((uint32_t)pFilterConfig->SrcAddrInverseFiltering << 8) | + ((uint32_t)pFilterConfig->SrcAddrFiltering << 9) | + ((uint32_t)pFilterConfig->HachOrPerfectFilter << 10) | + ((uint32_t)pFilterConfig->ReceiveAllMode << 31) | + pFilterConfig->ControlPacketsFilter); + + MODIFY_REG(heth->Instance->MACPFR, ETH_MACPFR_MASK, filterconfig); + + return HAL_OK; +} + +/** + * @brief Get the ETH MAC (L2) Filters configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that will hold + * the configuration of the ETH MAC filters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig) +{ + if (pFilterConfig == NULL) + { + return HAL_ERROR; + } + + pFilterConfig->PromiscuousMode = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PR)) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HashUnicast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HUC) >> 1) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HashMulticast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HMC) >> 2) > 0U) ? ENABLE : DISABLE; + pFilterConfig->DestAddrInverseFiltering = ((READ_BIT(heth->Instance->MACPFR, + ETH_MACPFR_DAIF) >> 3) > 0U) ? ENABLE : DISABLE; + pFilterConfig->PassAllMulticast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PM) >> 4) > 0U) ? ENABLE : DISABLE; + pFilterConfig->BroadcastFilter = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_DBF) >> 5) == 0U) ? ENABLE : DISABLE; + pFilterConfig->ControlPacketsFilter = READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PCF); + pFilterConfig->SrcAddrInverseFiltering = ((READ_BIT(heth->Instance->MACPFR, + ETH_MACPFR_SAIF) >> 8) > 0U) ? ENABLE : DISABLE; + pFilterConfig->SrcAddrFiltering = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_SAF) >> 9) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HachOrPerfectFilter = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HPF) >> 10) > 0U) + ? ENABLE : DISABLE; + pFilterConfig->ReceiveAllMode = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_RA) >> 31) > 0U) ? ENABLE : DISABLE; + + return HAL_OK; +} + +/** + * @brief Set the source MAC Address to be matched. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param AddrNbr: The MAC address to configure + * This parameter must be a value of the following: + * ETH_MAC_ADDRESS1 + * ETH_MAC_ADDRESS2 + * ETH_MAC_ADDRESS3 + * @param pMACAddr: Pointer to MAC address buffer data (6 bytes) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(ETH_HandleTypeDef *heth, uint32_t AddrNbr, uint8_t *pMACAddr) +{ + uint32_t macaddrlr; + uint32_t macaddrhr; + + if (pMACAddr == NULL) + { + return HAL_ERROR; + } + + /* Get mac addr high reg offset */ + macaddrhr = ((uint32_t) &(heth->Instance->MACA0HR) + AddrNbr); + /* Get mac addr low reg offset */ + macaddrlr = ((uint32_t) &(heth->Instance->MACA0LR) + AddrNbr); + + /* Set MAC addr bits 32 to 47 */ + (*(__IO uint32_t *)macaddrhr) = (((uint32_t)(pMACAddr[5]) << 8) | (uint32_t)pMACAddr[4]); + /* Set MAC addr bits 0 to 31 */ + (*(__IO uint32_t *)macaddrlr) = (((uint32_t)(pMACAddr[3]) << 24) | ((uint32_t)(pMACAddr[2]) << 16) | + ((uint32_t)(pMACAddr[1]) << 8) | (uint32_t)pMACAddr[0]); + + /* Enable address and set source address bit */ + (*(__IO uint32_t *)macaddrhr) |= (ETH_MACAHR_SA | ETH_MACAHR_AE); + + return HAL_OK; +} + +/** + * @brief Set the ETH Hash Table Value. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pHashTable: pointer to a table of two 32 bit values, that contains + * the 64 bits of the hash table. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable) +{ + if (pHashTable == NULL) + { + return HAL_ERROR; + } + + heth->Instance->MACHT0R = pHashTable[0]; + heth->Instance->MACHT1R = pHashTable[1]; + + return HAL_OK; +} + +/** + * @brief Set the VLAN Identifier for Rx packets + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ComparisonBits: 12 or 16 bit comparison mode + must be a value of @ref ETH_VLAN_Tag_Comparison + * @param VLANIdentifier: VLAN Identifier value + * @retval None + */ +void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, uint32_t VLANIdentifier) +{ + if (ComparisonBits == ETH_VLANTAGCOMPARISON_16BIT) + { + MODIFY_REG(heth->Instance->MACVTR, ETH_MACVTR_VL, VLANIdentifier); + CLEAR_BIT(heth->Instance->MACVTR, ETH_MACVTR_ETV); + } + else + { + MODIFY_REG(heth->Instance->MACVTR, ETH_MACVTR_VL_VID, VLANIdentifier); + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_ETV); + } +} + +/** + * @brief Enters the Power down mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pPowerDownConfig: a pointer to ETH_PowerDownConfigTypeDef structure + * that contains the Power Down configuration + * @retval None. + */ +void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, ETH_PowerDownConfigTypeDef *pPowerDownConfig) +{ + uint32_t powerdownconfig; + + powerdownconfig = (((uint32_t)pPowerDownConfig->MagicPacket << 1) | + ((uint32_t)pPowerDownConfig->WakeUpPacket << 2) | + ((uint32_t)pPowerDownConfig->GlobalUnicast << 9) | + ((uint32_t)pPowerDownConfig->WakeUpForward << 10) | + ETH_MACPCSR_PWRDWN); + + /* Enable PMT interrupt */ + __HAL_ETH_MAC_ENABLE_IT(heth, ETH_MACIER_PMTIE); + + MODIFY_REG(heth->Instance->MACPCSR, ETH_MACPCSR_MASK, powerdownconfig); +} + +/** + * @brief Exits from the Power down mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth) +{ + /* clear wake up sources */ + CLEAR_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_RWKPKTEN | ETH_MACPCSR_MGKPKTEN | ETH_MACPCSR_GLBLUCAST | + ETH_MACPCSR_RWKPFE); + + if (READ_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_PWRDWN) != (uint32_t)RESET) + { + /* Exit power down mode */ + CLEAR_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_PWRDWN); + } + + /* Disable PMT interrupt */ + __HAL_ETH_MAC_DISABLE_IT(heth, ETH_MACIER_PMTIE); +} + +/** + * @brief Set the WakeUp filter. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilter: pointer to filter registers values + * @param Count: number of filter registers, must be from 1 to 8. + * @retval None. + */ +HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count) +{ + uint32_t regindex; + + if (pFilter == NULL) + { + return HAL_ERROR; + } + + /* Reset Filter Pointer */ + SET_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_RWKFILTRST); + + /* Wake up packet filter config */ + for (regindex = 0; regindex < Count; regindex++) + { + /* Write filter regs */ + WRITE_REG(heth->Instance->MACRWKPFR, pFilter[regindex]); + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief ETH State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + ETH communication process, return Peripheral Errors occurred during communication + process + + +@endverbatim + * @{ + */ + +/** + * @brief Returns the ETH state. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL state + */ +HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth) +{ + return heth->gState; +} + +/** + * @brief Returns the ETH error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH Error Code + */ +uint32_t HAL_ETH_GetError(ETH_HandleTypeDef *heth) +{ + return heth->ErrorCode; +} + +/** + * @brief Returns the ETH DMA error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH DMA Error Code + */ +uint32_t HAL_ETH_GetDMAError(ETH_HandleTypeDef *heth) +{ + return heth->DMAErrorCode; +} + +/** + * @brief Returns the ETH MAC error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC Error Code + */ +uint32_t HAL_ETH_GetMACError(ETH_HandleTypeDef *heth) +{ + return heth->MACErrorCode; +} + +/** + * @brief Returns the ETH MAC WakeUp event source + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC WakeUp event source + */ +uint32_t HAL_ETH_GetMACWakeUpSource(ETH_HandleTypeDef *heth) +{ + return heth->MACWakeUpEvent; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup ETH_Private_Functions ETH Private Functions + * @{ + */ + + +static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + uint32_t macregval; + + /*------------------------ MACCR Configuration --------------------*/ + macregval = (macconf->InterPacketGapVal | + macconf->SourceAddrControl | + ((uint32_t)macconf->ChecksumOffload << 27) | + ((uint32_t)macconf->GiantPacketSizeLimitControl << 23) | + ((uint32_t)macconf->Support2KPacket << 22) | + ((uint32_t)macconf->CRCStripTypePacket << 21) | + ((uint32_t)macconf->AutomaticPadCRCStrip << 20) | + ((uint32_t)((macconf->Watchdog == DISABLE) ? 1U : 0U) << 19) | + ((uint32_t)((macconf->Jabber == DISABLE) ? 1U : 0U) << 17) | + ((uint32_t)macconf->JumboPacket << 16) | + macconf->Speed | + macconf->DuplexMode | + ((uint32_t)macconf->LoopbackMode << 12) | + ((uint32_t)macconf->CarrierSenseBeforeTransmit << 11) | + ((uint32_t)((macconf->ReceiveOwn == DISABLE) ? 1U : 0U) << 10) | + ((uint32_t)macconf->CarrierSenseDuringTransmit << 9) | + ((uint32_t)((macconf->RetryTransmission == DISABLE) ? 1U : 0U) << 8) | + macconf->BackOffLimit | + ((uint32_t)macconf->DeferralCheck << 4) | + macconf->PreambleLength); + + /* Write to MACCR */ + MODIFY_REG(heth->Instance->MACCR, ETH_MACCR_MASK, macregval); + + /*------------------------ MACECR Configuration --------------------*/ + macregval = ((macconf->ExtendedInterPacketGapVal << 25) | + ((uint32_t)macconf->ExtendedInterPacketGap << 24) | + ((uint32_t)macconf->UnicastSlowProtocolPacketDetect << 18) | + ((uint32_t)macconf->SlowProtocolDetect << 17) | + ((uint32_t)((macconf->CRCCheckingRxPackets == DISABLE) ? 1U : 0U) << 16) | + macconf->GiantPacketSizeLimit); + + /* Write to MACECR */ + MODIFY_REG(heth->Instance->MACECR, ETH_MACECR_MASK, macregval); + + /*------------------------ MACWTR Configuration --------------------*/ + macregval = (((uint32_t)macconf->ProgrammableWatchdog << 8) | + macconf->WatchdogTimeout); + + /* Write to MACWTR */ + MODIFY_REG(heth->Instance->MACWTR, ETH_MACWTR_MASK, macregval); + + /*------------------------ MACTFCR Configuration --------------------*/ + macregval = (((uint32_t)macconf->TransmitFlowControl << 1) | + macconf->PauseLowThreshold | + ((uint32_t)((macconf->ZeroQuantaPause == DISABLE) ? 1U : 0U) << 7) | + (macconf->PauseTime << 16)); + + /* Write to MACTFCR */ + MODIFY_REG(heth->Instance->MACTFCR, ETH_MACTFCR_MASK, macregval); + + /*------------------------ MACRFCR Configuration --------------------*/ + macregval = ((uint32_t)macconf->ReceiveFlowControl | + ((uint32_t)macconf->UnicastPausePacketDetect << 1)); + + /* Write to MACRFCR */ + MODIFY_REG(heth->Instance->MACRFCR, ETH_MACRFCR_MASK, macregval); + + /*------------------------ MTLTQOMR Configuration --------------------*/ + /* Write to MTLTQOMR */ + MODIFY_REG(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_MASK, macconf->TransmitQueueMode); + + /*------------------------ MTLRQOMR Configuration --------------------*/ + macregval = (macconf->ReceiveQueueMode | + ((uint32_t)((macconf->DropTCPIPChecksumErrorPacket == DISABLE) ? 1U : 0U) << 6) | + ((uint32_t)macconf->ForwardRxErrorPacket << 4) | + ((uint32_t)macconf->ForwardRxUndersizedGoodPacket << 3)); + + /* Write to MTLRQOMR */ + MODIFY_REG(heth->Instance->MTLRQOMR, ETH_MTLRQOMR_MASK, macregval); +} + +static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + uint32_t dmaregval; + + /*------------------------ DMAMR Configuration --------------------*/ + MODIFY_REG(heth->Instance->DMAMR, ETH_DMAMR_MASK, dmaconf->DMAArbitration); + + /*------------------------ DMASBMR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->AddressAlignedBeats << 12) | + dmaconf->BurstMode | + ((uint32_t)dmaconf->RebuildINCRxBurst << 15)); + + MODIFY_REG(heth->Instance->DMASBMR, ETH_DMASBMR_MASK, dmaregval); + + /*------------------------ DMACCR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->PBLx8Mode << 16) | + dmaconf->MaximumSegmentSize); + + MODIFY_REG(heth->Instance->DMACCR, ETH_DMACCR_MASK, dmaregval); + + /*------------------------ DMACTCR Configuration --------------------*/ + dmaregval = (dmaconf->TxDMABurstLength | + ((uint32_t)dmaconf->SecondPacketOperate << 4) | + ((uint32_t)dmaconf->TCPSegmentation << 12)); + + MODIFY_REG(heth->Instance->DMACTCR, ETH_DMACTCR_MASK, dmaregval); + + /*------------------------ DMACRCR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->FlushRxPacket << 31) | + dmaconf->RxDMABurstLength); + + /* Write to DMACRCR */ + MODIFY_REG(heth->Instance->DMACRCR, ETH_DMACRCR_MASK, dmaregval); +} + +/** + * @brief Configures Ethernet MAC and DMA with default parameters. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth) +{ + ETH_MACConfigTypeDef macDefaultConf; + ETH_DMAConfigTypeDef dmaDefaultConf; + + /*--------------- ETHERNET MAC registers default Configuration --------------*/ + macDefaultConf.AutomaticPadCRCStrip = ENABLE; + macDefaultConf.BackOffLimit = ETH_BACKOFFLIMIT_10; + macDefaultConf.CarrierSenseBeforeTransmit = DISABLE; + macDefaultConf.CarrierSenseDuringTransmit = DISABLE; + macDefaultConf.ChecksumOffload = ENABLE; + macDefaultConf.CRCCheckingRxPackets = ENABLE; + macDefaultConf.CRCStripTypePacket = ENABLE; + macDefaultConf.DeferralCheck = DISABLE; + macDefaultConf.DropTCPIPChecksumErrorPacket = ENABLE; + macDefaultConf.DuplexMode = ETH_FULLDUPLEX_MODE; + macDefaultConf.ExtendedInterPacketGap = DISABLE; + macDefaultConf.ExtendedInterPacketGapVal = 0x0; + macDefaultConf.ForwardRxErrorPacket = DISABLE; + macDefaultConf.ForwardRxUndersizedGoodPacket = DISABLE; + macDefaultConf.GiantPacketSizeLimit = 0x618; + macDefaultConf.GiantPacketSizeLimitControl = DISABLE; + macDefaultConf.InterPacketGapVal = ETH_INTERPACKETGAP_96BIT; + macDefaultConf.Jabber = ENABLE; + macDefaultConf.JumboPacket = DISABLE; + macDefaultConf.LoopbackMode = DISABLE; + macDefaultConf.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS_4; + macDefaultConf.PauseTime = 0x0; + macDefaultConf.PreambleLength = ETH_PREAMBLELENGTH_7; + macDefaultConf.ProgrammableWatchdog = DISABLE; + macDefaultConf.ReceiveFlowControl = DISABLE; + macDefaultConf.ReceiveOwn = ENABLE; + macDefaultConf.ReceiveQueueMode = ETH_RECEIVESTOREFORWARD; + macDefaultConf.RetryTransmission = ENABLE; + macDefaultConf.SlowProtocolDetect = DISABLE; + macDefaultConf.SourceAddrControl = ETH_SOURCEADDRESS_REPLACE_ADDR0; + macDefaultConf.Speed = ETH_SPEED_100M; + macDefaultConf.Support2KPacket = DISABLE; + macDefaultConf.TransmitQueueMode = ETH_TRANSMITSTOREFORWARD; + macDefaultConf.TransmitFlowControl = DISABLE; + macDefaultConf.UnicastPausePacketDetect = DISABLE; + macDefaultConf.UnicastSlowProtocolPacketDetect = DISABLE; + macDefaultConf.Watchdog = ENABLE; + macDefaultConf.WatchdogTimeout = ETH_MACWTR_WTO_2KB; + macDefaultConf.ZeroQuantaPause = ENABLE; + + /* MAC default configuration */ + ETH_SetMACConfig(heth, &macDefaultConf); + + /*--------------- ETHERNET DMA registers default Configuration --------------*/ + dmaDefaultConf.AddressAlignedBeats = ENABLE; + dmaDefaultConf.BurstMode = ETH_BURSTLENGTH_FIXED; + dmaDefaultConf.DMAArbitration = ETH_DMAARBITRATION_RX1_TX1; + dmaDefaultConf.FlushRxPacket = DISABLE; + dmaDefaultConf.PBLx8Mode = DISABLE; + dmaDefaultConf.RebuildINCRxBurst = DISABLE; + dmaDefaultConf.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT; + dmaDefaultConf.SecondPacketOperate = DISABLE; + dmaDefaultConf.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT; + dmaDefaultConf.TCPSegmentation = DISABLE; + dmaDefaultConf.MaximumSegmentSize = ETH_SEGMENT_SIZE_DEFAULT; + + /* DMA default configuration */ + ETH_SetDMAConfig(heth, &dmaDefaultConf); +} + + +/** + * @brief Initializes the DMA Tx descriptors. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmatxdesc; + uint32_t i; + + /* Fill each DMATxDesc descriptor with the right values */ + for (i = 0; i < (uint32_t)ETH_TX_DESC_CNT; i++) + { + dmatxdesc = heth->Init.TxDesc + i; + + WRITE_REG(dmatxdesc->DESC0, 0x0); + WRITE_REG(dmatxdesc->DESC1, 0x0); + WRITE_REG(dmatxdesc->DESC2, 0x0); + WRITE_REG(dmatxdesc->DESC3, 0x0); + + WRITE_REG(heth->TxDescList.TxDesc[i], (uint32_t)dmatxdesc); + + } + + heth->TxDescList.CurTxDesc = 0; + + /* Set Transmit Descriptor Ring Length */ + WRITE_REG(heth->Instance->DMACTDRLR, (ETH_TX_DESC_CNT - 1U)); + + /* Set Transmit Descriptor List Address */ + WRITE_REG(heth->Instance->DMACTDLAR, (uint32_t) heth->Init.TxDesc); + + /* Set Transmit Descriptor Tail pointer */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t) heth->Init.TxDesc); +} + +/** + * @brief Initializes the DMA Rx descriptors in chain mode. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmarxdesc; + uint32_t i; + + for (i = 0; i < (uint32_t)ETH_RX_DESC_CNT; i++) + { + dmarxdesc = heth->Init.RxDesc + i; + + WRITE_REG(dmarxdesc->DESC0, 0x0); + WRITE_REG(dmarxdesc->DESC1, 0x0); + WRITE_REG(dmarxdesc->DESC2, 0x0); + WRITE_REG(dmarxdesc->DESC3, 0x0); + WRITE_REG(dmarxdesc->BackupAddr0, 0x0); + WRITE_REG(dmarxdesc->BackupAddr1, 0x0); + + + /* Set Rx descritors addresses */ + WRITE_REG(heth->RxDescList.RxDesc[i], (uint32_t)dmarxdesc); + + } + + WRITE_REG(heth->RxDescList.RxDescIdx, 0); + WRITE_REG(heth->RxDescList.RxDescCnt, 0); + WRITE_REG(heth->RxDescList.RxBuildDescIdx, 0); + WRITE_REG(heth->RxDescList.RxBuildDescCnt, 0); + WRITE_REG(heth->RxDescList.ItMode, 0); + + /* Set Receive Descriptor Ring Length */ + WRITE_REG(heth->Instance->DMACRDRLR, ((uint32_t)(ETH_RX_DESC_CNT - 1U))); + + /* Set Receive Descriptor List Address */ + WRITE_REG(heth->Instance->DMACRDLAR, (uint32_t) heth->Init.RxDesc); + + /* Set Receive Descriptor Tail pointer Address */ + WRITE_REG(heth->Instance->DMACRDTPR, ((uint32_t)(heth->Init.RxDesc + (uint32_t)(ETH_RX_DESC_CNT - 1U)))); +} + +/** + * @brief Prepare Tx DMA descriptor before transmission. + * called by HAL_ETH_Transmit_IT and HAL_ETH_Transmit_IT() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Tx packet configuration + * @param ItMode: Enable or disable Tx EOT interrept + * @retval Status + */ +static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t ItMode) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t descidx = dmatxdesclist->CurTxDesc; + uint32_t firstdescidx = dmatxdesclist->CurTxDesc; + uint32_t idx; + uint32_t descnbr = 0; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + ETH_BufferTypeDef *txbuffer = pTxConfig->TxBuffer; + uint32_t bd_count = 0; + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if ((READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCWBF_OWN) == ETH_DMATXNDESCWBF_OWN) + || (dmatxdesclist->PacketAddress[descidx] != NULL)) + { + return HAL_ETH_ERROR_BUSY; + } + + /***************************************************************************/ + /***************** Context descriptor configuration (Optional) **********/ + /***************************************************************************/ + /* If VLAN tag is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + { + /* Set vlan tag value */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXCDESC_VT, pTxConfig->VlanTag); + /* Set vlan tag valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_VLTV); + /* Set the descriptor as the vlan input source */ + SET_BIT(heth->Instance->MACVIR, ETH_MACVIR_VLTI); + + /* if inner VLAN is enabled */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_INNERVLANTAG) != (uint32_t)RESET) + { + /* Set inner vlan tag value */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXCDESC_IVT, (pTxConfig->InnerVlanTag << 16)); + /* Set inner vlan tag valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_IVLTV); + + /* Set Vlan Tag control */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXCDESC_IVTIR, pTxConfig->InnerVlanCtrl); + + /* Set the descriptor as the inner vlan input source */ + SET_BIT(heth->Instance->MACIVIR, ETH_MACIVIR_VLTI); + /* Enable double VLAN processing */ + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_EDVLP); + } + } + + /* if tcp segmentation is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set MSS value */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXCDESC_MSS, pTxConfig->MaxSegmentSize); + /* Set MSS valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_TCMSSV); + } + + if ((READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + || (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET)) + { + /* Set as context descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_CTXT); + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Set own bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_OWN); + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + descnbr += 1U; + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if (READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCWBF_OWN) == ETH_DMATXNDESCWBF_OWN) + { + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[firstdescidx]; + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Clear own bit */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_OWN); + + return HAL_ETH_ERROR_BUSY; + } + } + + /***************************************************************************/ + /***************** Normal descriptors configuration *****************/ + /***************************************************************************/ + + descnbr += 1U; + + /* Set header or buffer 1 address */ + WRITE_REG(dmatxdesc->DESC0, (uint32_t)txbuffer->buffer); + /* Set header or buffer 1 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B1L, txbuffer->len); + + if (txbuffer->next != NULL) + { + txbuffer = txbuffer->next; + /* Set buffer 2 address */ + WRITE_REG(dmatxdesc->DESC1, (uint32_t)txbuffer->buffer); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, (txbuffer->len << 16)); + } + else + { + WRITE_REG(dmatxdesc->DESC1, 0x0); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, 0x0U); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set TCP Header length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_THL, (pTxConfig->TCPHeaderLen << 19)); + /* Set TCP payload length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TPL, pTxConfig->PayloadLen); + /* Set TCP Segmentation Enabled bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TSE); + } + else + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FL, pTxConfig->Length); + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CIC, pTxConfig->ChecksumCtrl); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CRCPAD) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CPC, pTxConfig->CRCPadCtrl); + } + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + { + /* Set Vlan Tag control */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_VTIR, pTxConfig->VlanCtrl); + } + + /* Mark it as First Descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FD); + /* Mark it as NORMAL descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CTXT); + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* set OWN bit of FIRST descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + + /* If source address insertion/replacement is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_SAIC) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_SAIC, pTxConfig->SrcAddrCtrl); + } + + /* only if the packet is split into more than one descriptors > 1 */ + while (txbuffer->next != NULL) + { + /* Clear the LD bit of previous descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_LD); + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + /* Clear the FD bit of new Descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FD); + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if ((READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN) == ETH_DMATXNDESCRF_OWN) + || (dmatxdesclist->PacketAddress[descidx] != NULL)) + { + descidx = firstdescidx; + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + /* clear previous desc own bit */ + for (idx = 0; idx < descnbr; idx ++) + { + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + } + + return HAL_ETH_ERROR_BUSY; + } + + descnbr += 1U; + + /* Get the next Tx buffer in the list */ + txbuffer = txbuffer->next; + + /* Set header or buffer 1 address */ + WRITE_REG(dmatxdesc->DESC0, (uint32_t)txbuffer->buffer); + /* Set header or buffer 1 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B1L, txbuffer->len); + + if (txbuffer->next != NULL) + { + /* Get the next Tx buffer in the list */ + txbuffer = txbuffer->next; + /* Set buffer 2 address */ + WRITE_REG(dmatxdesc->DESC1, (uint32_t)txbuffer->buffer); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, (txbuffer->len << 16)); + } + else + { + WRITE_REG(dmatxdesc->DESC1, 0x0); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, 0x0U); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set TCP payload length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TPL, pTxConfig->PayloadLen); + /* Set TCP Segmentation Enabled bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TSE); + } + else + { + /* Set the packet length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FL, pTxConfig->Length); + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != (uint32_t)RESET) + { + /* Checksum Insertion Control */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CIC, pTxConfig->ChecksumCtrl); + } + } + + bd_count += 1U; + + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Set Own bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + /* Mark it as NORMAL descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CTXT); + } + + if (ItMode != ((uint32_t)RESET)) + { + /* Set Interrupt on completion bit */ + SET_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_IOC); + } + else + { + /* Clear Interrupt on completion bit */ + CLEAR_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_IOC); + } + + /* Mark it as LAST descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_LD); + /* Save the current packet address to expose it to the application */ + dmatxdesclist->PacketAddress[descidx] = dmatxdesclist->CurrentPacketAddress; + + dmatxdesclist->CurTxDesc = descidx; + + /* disable the interrupt */ + __disable_irq(); + + dmatxdesclist->BuffersInUse += bd_count + 1U; + + /* Enable interrupts back */ + __enable_irq(); + + + /* Return function status */ + return HAL_ETH_ERROR_NONE; +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth) +{ + /* Init the ETH Callback settings */ + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; /* Legacy weak TxCpltCallback */ + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; /* Legacy weak RxCpltCallback */ + heth->ErrorCallback = HAL_ETH_ErrorCallback; /* Legacy weak ErrorCallback */ + heth->PMTCallback = HAL_ETH_PMTCallback; /* Legacy weak PMTCallback */ + heth->EEECallback = HAL_ETH_EEECallback; /* Legacy weak EEECallback */ + heth->WakeUpCallback = HAL_ETH_WakeUpCallback; /* Legacy weak WakeUpCallback */ + heth->rxLinkCallback = HAL_ETH_RxLinkCallback; /* Legacy weak RxLinkCallback */ + heth->txFreeCallback = HAL_ETH_TxFreeCallback; /* Legacy weak TxFreeCallback */ +#ifdef HAL_ETH_USE_PTP + heth->txPtpCallback = HAL_ETH_TxPtpCallback; /* Legacy weak TxPtpCallback */ +#endif /* HAL_ETH_USE_PTP */ + heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; /* Legacy weak RxAllocateCallback */ +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#endif /* HAL_ETH_MODULE_ENABLED */ + +/** + * @} + */ + -- cgit v1.2.3