From 86608c6770cf08c138a2bdab5855072f64be09ef Mon Sep 17 00:00:00 2001 From: joshua Date: Sat, 30 Dec 2023 23:54:31 -0500 Subject: initial commit --- .../STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c | 4351 ++++++++++++++++++++ 1 file changed, 4351 insertions(+) create mode 100644 Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c') diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c new file mode 100644 index 0000000..9668128 --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c @@ -0,0 +1,4351 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_mmc.c + * @author MCD Application Team + * @brief MMC card HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (MMC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + MMC card Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver implements a high level communication layer for read and write from/to + this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by + the user in HAL_MMC_MspInit() function (MSP layer). + Basically, the MSP layer configuration should be the same as we provide in the + examples. + You can easily tailor this configuration according to hardware resources. + + [..] + This driver is a generic layered driver for SDMMC memories which uses the HAL + SDMMC driver functions to interface with MMC and eMMC cards devices. + It is used as follows: + + (#)Initialize the SDMMC low level resources by implement the HAL_MMC_MspInit() API: + (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE(); + (##) SDMMC pins configuration for MMC card + (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init() + and according to your pin assignment; + (##) NVIC configuration if you need to use interrupt process (HAL_MMC_ReadBlocks_IT() + and HAL_MMC_WriteBlocks_IT() APIs). + (+++) Configure the SDMMC interrupt priorities using function HAL_NVIC_SetPriority(); + (+++) Enable the NVIC SDMMC IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT() + and __HAL_MMC_DISABLE_IT() inside the communication process. + (+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT() + and __HAL_MMC_CLEAR_IT() + (##) No general propose DMA Configuration is needed, an Internal DMA for SDMMC Peripheral are used. + + (#) At this stage, you can perform MMC read/write/erase operations after MMC card initialization + + + *** MMC Card Initialization and configuration *** + ================================================ + [..] + To initialize the MMC Card, use the HAL_MMC_Init() function. It Initializes + SDMMC Peripheral (STM32 side) and the MMC Card, and put it into StandBy State (Ready for data transfer). + This function provide the following operations: + + (#) Initialize the SDMMC peripheral interface with default configuration. + The initialization process is done at 400KHz. You can change or adapt + this frequency by adjusting the "ClockDiv" field. + The MMC Card frequency (SDMMC_CK) is computed as follows: + + SDMMC_CK = SDMMCCLK / (2 * ClockDiv) + + In initialization mode and according to the MMC Card standard, + make sure that the SDMMC_CK frequency doesn't exceed 400KHz. + + This phase of initialization is done through SDMMC_Init() and + SDMMC_PowerState_ON() SDMMC low level APIs. + + (#) Initialize the MMC card. The API used is HAL_MMC_InitCard(). + This phase allows the card initialization and identification + and check the MMC Card type (Standard Capacity or High Capacity) + The initialization flow is compatible with MMC standard. + + This API (HAL_MMC_InitCard()) could be used also to reinitialize the card in case + of plug-off plug-in. + + (#) Configure the MMC Card Data transfer frequency. By Default, the card transfer + frequency by adjusting the "ClockDiv" field. + In transfer mode and according to the MMC Card standard, make sure that the + SDMMC_CK frequency doesn't exceed 25MHz and 100MHz in High-speed mode switch. + + (#) Select the corresponding MMC Card according to the address read with the step 2. + + (#) Configure the MMC Card in wide bus mode: 4-bits data. + + *** MMC Card Read operation *** + ============================== + [..] + (+) You can read from MMC card in polling mode by using function HAL_MMC_ReadBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + + (+) You can read from MMC card in DMA mode by using function HAL_MMC_ReadBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the DMA transfer process through the MMC Rx interrupt event. + + (+) You can read from MMC card in Interrupt mode by using function HAL_MMC_ReadBlocks_IT(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the IT transfer process through the MMC Rx interrupt event. + + *** MMC Card Write operation *** + =============================== + [..] + (+) You can write to MMC card in polling mode by using function HAL_MMC_WriteBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + + (+) You can write to MMC card in DMA mode by using function HAL_MMC_WriteBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 byte). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the DMA transfer process through the MMC Tx interrupt event. + + (+) You can write to MMC card in Interrupt mode by using function HAL_MMC_WriteBlocks_IT(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the IT transfer process through the MMC Tx interrupt event. + + *** MMC card information *** + =========================== + [..] + (+) To get MMC card information, you can use the function HAL_MMC_GetCardInfo(). + It returns useful information about the MMC card such as block size, card type, + block number ... + + *** MMC card CSD register *** + ============================ + [..] + (+) The HAL_MMC_GetCardCSD() API allows to get the parameters of the CSD register. + Some of the CSD parameters are useful for card initialization and identification. + + *** MMC card CID register *** + ============================ + [..] + (+) The HAL_MMC_GetCardCID() API allows to get the parameters of the CID register. + Some of the CID parameters are useful for card initialization and identification. + + *** MMC HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in MMC HAL driver. + + (+) __HAL_MMC_ENABLE_IT: Enable the MMC device interrupt + (+) __HAL_MMC_DISABLE_IT: Disable the MMC device interrupt + (+) __HAL_MMC_GET_FLAG:Check whether the specified MMC flag is set or not + (+) __HAL_MMC_CLEAR_FLAG: Clear the MMC's pending flags + + [..] + (@) You can refer to the MMC HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_MMC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_MMC_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMADblBuf0CpltCallback : callback when the DMA reception of first buffer is completed. + (+) Read_DMADblBuf1CpltCallback : callback when the DMA reception of second buffer is completed. + (+) Write_DMADblBuf0CpltCallback : callback when the DMA transmission of first buffer is completed. + (+) Write_DMADblBuf1CpltCallback : callback when the DMA transmission of second buffer is completed. + (+) MspInitCallback : MMC MspInit. + (+) MspDeInitCallback : MMC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_MMC_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMADblBuf0CpltCallback : callback when the DMA reception of first buffer is completed. + (+) Read_DMADblBuf1CpltCallback : callback when the DMA reception of second buffer is completed. + (+) Write_DMADblBuf0CpltCallback : callback when the DMA transmission of first buffer is completed. + (+) Write_DMADblBuf1CpltCallback : callback when the DMA transmission of second buffer is completed. + (+) MspInitCallback : MMC MspInit. + (+) MspDeInitCallback : MMC MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_MMC_Init and if the state is HAL_MMC_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the HAL_MMC_Init + and HAL_MMC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_MMC_Init and HAL_MMC_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_MMC_RegisterCallback before calling HAL_MMC_DeInit + or HAL_MMC_Init function. + + When The compilation define USE_HAL_MMC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup MMC MMC + * @brief MMC HAL module driver + * @{ + */ + +#ifdef HAL_MMC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup MMC_Private_Defines + * @{ + */ +#if defined (VDD_VALUE) && (VDD_VALUE <= 1950U) +#define MMC_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define MMC_EXT_CSD_PWR_CL_26_INDEX 201 +#define MMC_EXT_CSD_PWR_CL_52_INDEX 200 +#define MMC_EXT_CSD_PWR_CL_DDR_52_INDEX 238 + +#define MMC_EXT_CSD_PWR_CL_26_POS 8 +#define MMC_EXT_CSD_PWR_CL_52_POS 0 +#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 16 +#else +#define MMC_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE + +#define MMC_EXT_CSD_PWR_CL_26_INDEX 203 +#define MMC_EXT_CSD_PWR_CL_52_INDEX 202 +#define MMC_EXT_CSD_PWR_CL_DDR_52_INDEX 239 + +#define MMC_EXT_CSD_PWR_CL_26_POS 24 +#define MMC_EXT_CSD_PWR_CL_52_POS 16 +#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 24 +#endif /* (VDD_VALUE) && (VDD_VALUE <= 1950U)*/ + +#define MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_INDEX 216 +#define MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_POS 0 +#define MMC_EXT_CSD_S_A_TIMEOUT_INDEX 217 +#define MMC_EXT_CSD_S_A_TIMEOUT_POS 8 + +/* Frequencies used in the driver for clock divider calculation */ +#define MMC_INIT_FREQ 400000U /* Initialization phase : 400 kHz max */ +#define MMC_HIGH_SPEED_FREQ 52000000U /* High speed phase : 52 MHz max */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Functions MMC Private Functions + * @{ + */ +static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc); +static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc); +static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus); +static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc); +static void MMC_Write_IT(MMC_HandleTypeDef *hmmc); +static void MMC_Read_IT(MMC_HandleTypeDef *hmmc); +static uint32_t MMC_HighSpeed(MMC_HandleTypeDef *hmmc, FunctionalState state); +static uint32_t MMC_DDR_Mode(MMC_HandleTypeDef *hmmc, FunctionalState state); +static HAL_StatusTypeDef MMC_ReadExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pFieldData, uint16_t FieldIndex, + uint32_t Timeout); +static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide, uint32_t Speed); + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup MMC_Exported_Functions + * @{ + */ + +/** @addtogroup MMC_Exported_Functions_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize the MMC + card device to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the MMC according to the specified parameters in the + MMC_HandleTypeDef and create the associated handle. + * @param hmmc: Pointer to the MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc) +{ + /* Check the MMC handle allocation */ + if (hmmc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hmmc->Instance)); + assert_param(IS_SDMMC_CLOCK_EDGE(hmmc->Init.ClockEdge)); + assert_param(IS_SDMMC_CLOCK_POWER_SAVE(hmmc->Init.ClockPowerSave)); + assert_param(IS_SDMMC_BUS_WIDE(hmmc->Init.BusWide)); + assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(hmmc->Init.HardwareFlowControl)); + assert_param(IS_SDMMC_CLKDIV(hmmc->Init.ClockDiv)); + + if (hmmc->State == HAL_MMC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hmmc->Lock = HAL_UNLOCKED; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + /* Reset Callback pointers in HAL_MMC_STATE_RESET only */ + hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback; + hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback; + hmmc->ErrorCallback = HAL_MMC_ErrorCallback; + hmmc->AbortCpltCallback = HAL_MMC_AbortCallback; + hmmc->Read_DMADblBuf0CpltCallback = HAL_MMCEx_Read_DMADoubleBuf0CpltCallback; + hmmc->Read_DMADblBuf1CpltCallback = HAL_MMCEx_Read_DMADoubleBuf1CpltCallback; + hmmc->Write_DMADblBuf0CpltCallback = HAL_MMCEx_Write_DMADoubleBuf0CpltCallback; + hmmc->Write_DMADblBuf1CpltCallback = HAL_MMCEx_Write_DMADoubleBuf1CpltCallback; + + if (hmmc->MspInitCallback == NULL) + { + hmmc->MspInitCallback = HAL_MMC_MspInit; + } + + /* Init the low level hardware */ + hmmc->MspInitCallback(hmmc); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_MMC_MspInit(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize the Card parameters */ + if (HAL_MMC_InitCard(hmmc) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Initialize the error code */ + hmmc->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the MMC operation */ + hmmc->Context = MMC_CONTEXT_NONE; + + /* Initialize the MMC state */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Configure bus width */ + if (hmmc->Init.BusWide != SDMMC_BUS_WIDE_1B) + { + if (HAL_MMC_ConfigWideBusOperation(hmmc, hmmc->Init.BusWide) != HAL_OK) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the MMC Card. + * @param hmmc: Pointer to MMC handle + * @note This function initializes the MMC card. It could be used when a card + re-initialization is needed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + MMC_InitTypeDef Init; + uint32_t sdmmc_clk; + + /* Default SDMMC peripheral configuration for MMC card initialization */ + Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; + Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; + Init.BusWide = SDMMC_BUS_WIDE_1B; + Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; + + /* Init Clock should be less or equal to 400Khz*/ + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC); + if (sdmmc_clk == 0U) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode = SDMMC_ERROR_INVALID_PARAMETER; + return HAL_ERROR; + } + Init.ClockDiv = sdmmc_clk / (2U * MMC_INIT_FREQ); + +#if (USE_SD_TRANSCEIVER != 0U) + Init.TranceiverPresent = SDMMC_TRANSCEIVER_NOT_PRESENT; +#endif /* USE_SD_TRANSCEIVER */ + + /* Initialize SDMMC peripheral interface with default configuration */ + (void)SDMMC_Init(hmmc->Instance, Init); + + /* Set Power State to ON */ + (void)SDMMC_PowerState_ON(hmmc->Instance); + + /* wait 74 Cycles: required power up waiting time before starting + the MMC initialization sequence */ + if (Init.ClockDiv != 0U) + { + sdmmc_clk = sdmmc_clk / (2U * Init.ClockDiv); + } + + if (sdmmc_clk != 0U) + { + HAL_Delay(1U + (74U * 1000U / (sdmmc_clk))); + } + + /* Identify card operating voltage */ + errorstate = MMC_PowerON(hmmc); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Card initialization */ + errorstate = MMC_InitCard(hmmc); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief De-Initializes the MMC card. + * @param hmmc: Pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_DeInit(MMC_HandleTypeDef *hmmc) +{ + /* Check the MMC handle allocation */ + if (hmmc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hmmc->Instance)); + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Set MMC power state to off */ + MMC_PowerOFF(hmmc); + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + if (hmmc->MspDeInitCallback == NULL) + { + hmmc->MspDeInitCallback = HAL_MMC_MspDeInit; + } + + /* DeInit the low level hardware */ + hmmc->MspDeInitCallback(hmmc); +#else + /* De-Initialize the MSP layer */ + HAL_MMC_MspDeInit(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->State = HAL_MMC_STATE_RESET; + + return HAL_OK; +} + + +/** + * @brief Initializes the MMC MSP. + * @param hmmc: Pointer to MMC handle + * @retval None + */ +__weak void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MMC_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initialize MMC MSP. + * @param hmmc: Pointer to MMC handle + * @retval None + */ +__weak void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MMC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup MMC_Exported_Functions_Group2 + * @brief Data transfer functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the data + transfer from/to MMC card. + +@endverbatim + * @{ + */ + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc: Pointer to MMC handle + * @param pData: pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of MMC blocks to read + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, + uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) + & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Read block(s) in polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = MMC_CONTEXT_READ_SINGLE_BLOCK; + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= 32U)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + } + dataremaining -= 32U; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Send stop transmission command in case of multiblock read */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + } + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to write block(s) to a specified address in a card. The Data + * transfer is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc: Pointer to MMC handle + * @param pData: pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of MMC blocks to write + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + const uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = MMC_CONTEXT_WRITE_SINGLE_BLOCK; + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= 32U)) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = (uint32_t)(*tempbuff); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 8U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 16U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 24U); + tempbuff++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + } + dataremaining -= 32U; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Send stop transmission command in case of multiblock write */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + } + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the IT transfer process through the MMC Rx + * interrupt event. + * @param hmmc: Pointer to MMC handle + * @param pData: Pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pRxBuffPtr = pData; + hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Read Blocks in IT mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_IT); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_IT); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add); + } + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_RXFIFOHF)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the IT transfer process through the MMC Tx + * interrupt event. + * @param hmmc: Pointer to MMC handle + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, const uint8_t *pData, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pTxBuffPtr = pData; + hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_IT); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_IT); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_TXFIFOHE)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the DMA transfer process through the MMC Rx + * interrupt event. + * @param hmmc: Pointer MMC handle + * @param pData: Pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_DMA_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pRxBuffPtr = pData; + hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + hmmc->Instance->IDMABASE0 = (uint32_t) pData ; + hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Read Blocks in DMA mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_DMA); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode = errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the DMA transfer process through the MMC Tx + * interrupt event. + * @param hmmc: Pointer to MMC handle + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, const uint8_t *pData, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pTxBuffPtr = pData; + hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + hmmc->Instance->IDMABASE0 = (uint32_t) pData ; + hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_DMA); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Erases the specified memory area of the given MMC card. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc: Pointer to MMC handle + * @param BlockStartAdd: Start Block address + * @param BlockEndAdd: End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate; + uint32_t start_add = BlockStartAdd; + uint32_t end_add = BlockEndAdd; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if (end_add < start_add) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (end_add > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) + & 0x000000FFU) != 0x0U) + { + if (((start_add % 8U) != 0U) || ((end_add % 8U) != 0U)) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check if the card command class supports erase command */ + if (((hmmc->MmcCard.Class) & SDMMC_CCCC_ERASE) == 0U) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + if ((SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_LOCK_UNLOCK_FAILED; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + start_add *= 512U; + end_add *= 512U; + } + + /* Send CMD35 MMC_ERASE_GRP_START with argument as addr */ + errorstate = SDMMC_CmdEraseStartAdd(hmmc->Instance, start_add); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD36 MMC_ERASE_GRP_END with argument as addr */ + errorstate = SDMMC_CmdEraseEndAdd(hmmc->Instance, end_add); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD38 ERASE */ + errorstate = SDMMC_CmdErase(hmmc->Instance, 0UL); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles MMC card interrupt request. + * @param hmmc: Pointer to MMC handle + * @retval None + */ +void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + uint32_t context = hmmc->Context; + + /* Check for SDMMC interrupt flags */ + if ((__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) != RESET) && ((context & MMC_CONTEXT_IT) != 0U)) + { + MMC_Read_IT(hmmc); + } + + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND) != RESET) + { + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_DATAEND); + + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR | SDMMC_IT_TXFIFOHE | \ + SDMMC_IT_RXFIFOHF); + + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_IDMABTC); + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + if ((context & MMC_CONTEXT_DMA) != 0U) + { + hmmc->Instance->DLEN = 0; + hmmc->Instance->DCTRL = 0; + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA ; + + /* Stop Transfer for Write Multi blocks or Read Multi blocks */ + if (((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + if (((context & MMC_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->TxCpltCallback(hmmc); +#else + HAL_MMC_TxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + if (((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->RxCpltCallback(hmmc); +#else + HAL_MMC_RxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else if ((context & MMC_CONTEXT_IT) != 0U) + { + /* Stop Transfer for Write Multi blocks or Read Multi blocks */ + if (((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + if (((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->RxCpltCallback(hmmc); +#else + HAL_MMC_RxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->TxCpltCallback(hmmc); +#else + HAL_MMC_TxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if ((__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) != RESET) && ((context & MMC_CONTEXT_IT) != 0U)) + { + MMC_Write_IT(hmmc); + } + + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL | + SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_RXOVERR | SDMMC_FLAG_TXUNDERR) != RESET) + { + /* Set Error code */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_DCRCFAIL) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + } + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_DTIMEOUT) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + } + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_RXOVERR) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + } + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_TXUNDERR) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + } + + /* Clear All flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + /* Disable all interrupts */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + hmmc->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + hmmc->Instance->CMD |= SDMMC_CMD_CMDSTOP; + hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance); + hmmc->Instance->CMD &= ~(SDMMC_CMD_CMDSTOP); + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_DABORT); + + if ((context & MMC_CONTEXT_IT) != 0U) + { + /* Set the MMC state to ready to be able to start again the process */ + hmmc->State = HAL_MMC_STATE_READY; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else if ((context & MMC_CONTEXT_DMA) != 0U) + { + if (hmmc->ErrorCode != HAL_MMC_ERROR_NONE) + { + /* Disable Internal DMA */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_IDMABTC); + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Set the MMC state to ready to be able to start again the process */ + hmmc->State = HAL_MMC_STATE_READY; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_IDMABTC) != RESET) + { + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_IT_IDMABTC); + if (READ_BIT(hmmc->Instance->IDMACTRL, SDMMC_IDMA_IDMABACT) == 0U) + { + /* Current buffer is buffer0, Transfer complete for buffer1 */ + if ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->Write_DMADblBuf1CpltCallback(hmmc); +#else + HAL_MMCEx_Write_DMADoubleBuf1CpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else /* MMC_CONTEXT_READ_MULTIPLE_BLOCK */ + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->Read_DMADblBuf1CpltCallback(hmmc); +#else + HAL_MMCEx_Read_DMADoubleBuf1CpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else /* MMC_DMA_BUFFER1 */ + { + /* Current buffer is buffer1, Transfer complete for buffer0 */ + if ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->Write_DMADblBuf0CpltCallback(hmmc); +#else + HAL_MMCEx_Write_DMADoubleBuf0CpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else /* MMC_CONTEXT_READ_MULTIPLE_BLOCK */ + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->Read_DMADblBuf0CpltCallback(hmmc); +#else + HAL_MMCEx_Read_DMADoubleBuf0CpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + } + + else + { + /* Nothing to do */ + } +} + +/** + * @brief return the MMC state + * @param hmmc: Pointer to mmc handle + * @retval HAL state + */ +HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc) +{ + return hmmc->State; +} + +/** + * @brief Return the MMC error code + * @param hmmc : Pointer to a MMC_HandleTypeDef structure that contains + * the configuration information. + * @retval MMC Error Code + */ +uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc) +{ + return hmmc->ErrorCode; +} + +/** + * @brief Tx Transfer completed callbacks + * @param hmmc: Pointer to MMC handle + * @retval None + */ +__weak void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hmmc: Pointer MMC handle + * @retval None + */ +__weak void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief MMC error callbacks + * @param hmmc: Pointer MMC handle + * @retval None + */ +__weak void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief MMC Abort callbacks + * @param hmmc: Pointer MMC handle + * @retval None + */ +__weak void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_AbortCallback can be implemented in the user file + */ +} + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User MMC Callback + * To be used instead of the weak (surcharged) predefined callback + * @note The HAL_MMC_RegisterCallback() may be called before HAL_MMC_Init() in + * HAL_MMC_STATE_RESET to register callbacks for HAL_MMC_MSP_INIT_CB_ID + * and HAL_MMC_MSP_DEINIT_CB_ID. + * @param hmmc : MMC handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_MMC_TX_CPLT_CB_ID MMC Tx Complete Callback ID + * @arg @ref HAL_MMC_RX_CPLT_CB_ID MMC Rx Complete Callback ID + * @arg @ref HAL_MMC_ERROR_CB_ID MMC Error Callback ID + * @arg @ref HAL_MMC_ABORT_CB_ID MMC Abort Callback ID + * @arg @ref HAL_MMC_READ_DMA_DBL_BUF0_CPLT_CB_ID MMC DMA Rx Double buffer 0 Callback ID + * @arg @ref HAL_MMC_READ_DMA_DBL_BUF1_CPLT_CB_ID MMC DMA Rx Double buffer 1 Callback ID + * @arg @ref HAL_MMC_WRITE_DMA_DBL_BUF0_CPLT_CB_ID MMC DMA Tx Double buffer 0 Callback ID + * @arg @ref HAL_MMC_WRITE_DMA_DBL_BUF1_CPLT_CB_ID MMC DMA Tx Double buffer 1 Callback ID + * @arg @ref HAL_MMC_MSP_INIT_CB_ID MMC MspInit Callback ID + * @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_MMC_RegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, + pMMC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + switch (CallbackId) + { + case HAL_MMC_TX_CPLT_CB_ID : + hmmc->TxCpltCallback = pCallback; + break; + case HAL_MMC_RX_CPLT_CB_ID : + hmmc->RxCpltCallback = pCallback; + break; + case HAL_MMC_ERROR_CB_ID : + hmmc->ErrorCallback = pCallback; + break; + case HAL_MMC_ABORT_CB_ID : + hmmc->AbortCpltCallback = pCallback; + break; + case HAL_MMC_READ_DMA_DBL_BUF0_CPLT_CB_ID : + hmmc->Read_DMADblBuf0CpltCallback = pCallback; + break; + case HAL_MMC_READ_DMA_DBL_BUF1_CPLT_CB_ID : + hmmc->Read_DMADblBuf1CpltCallback = pCallback; + break; + case HAL_MMC_WRITE_DMA_DBL_BUF0_CPLT_CB_ID : + hmmc->Write_DMADblBuf0CpltCallback = pCallback; + break; + case HAL_MMC_WRITE_DMA_DBL_BUF1_CPLT_CB_ID : + hmmc->Write_DMADblBuf1CpltCallback = pCallback; + break; + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = pCallback; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hmmc->State == HAL_MMC_STATE_RESET) + { + switch (CallbackId) + { + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = pCallback; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User MMC Callback + * MMC Callback is redirected to the weak (surcharged) predefined callback + * @note The HAL_MMC_UnRegisterCallback() may be called before HAL_MMC_Init() in + * HAL_MMC_STATE_RESET to register callbacks for HAL_MMC_MSP_INIT_CB_ID + * and HAL_MMC_MSP_DEINIT_CB_ID. + * @param hmmc : MMC handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_MMC_TX_CPLT_CB_ID MMC Tx Complete Callback ID + * @arg @ref HAL_MMC_RX_CPLT_CB_ID MMC Rx Complete Callback ID + * @arg @ref HAL_MMC_ERROR_CB_ID MMC Error Callback ID + * @arg @ref HAL_MMC_ABORT_CB_ID MMC Abort Callback ID + * @arg @ref HAL_MMC_READ_DMA_DBL_BUF0_CPLT_CB_ID MMC DMA Rx Double buffer 0 Callback ID + * @arg @ref HAL_MMC_READ_DMA_DBL_BUF1_CPLT_CB_ID MMC DMA Rx Double buffer 1 Callback ID + * @arg @ref HAL_MMC_WRITE_DMA_DBL_BUF0_CPLT_CB_ID MMC DMA Tx Double buffer 0 Callback ID + * @arg @ref HAL_MMC_WRITE_DMA_DBL_BUF1_CPLT_CB_ID MMC DMA Tx Double buffer 1 Callback ID + * @arg @ref HAL_MMC_MSP_INIT_CB_ID MMC MspInit Callback ID + * @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + switch (CallbackId) + { + case HAL_MMC_TX_CPLT_CB_ID : + hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback; + break; + case HAL_MMC_RX_CPLT_CB_ID : + hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback; + break; + case HAL_MMC_ERROR_CB_ID : + hmmc->ErrorCallback = HAL_MMC_ErrorCallback; + break; + case HAL_MMC_ABORT_CB_ID : + hmmc->AbortCpltCallback = HAL_MMC_AbortCallback; + break; + case HAL_MMC_READ_DMA_DBL_BUF0_CPLT_CB_ID : + hmmc->Read_DMADblBuf0CpltCallback = HAL_MMCEx_Read_DMADoubleBuf0CpltCallback; + break; + case HAL_MMC_READ_DMA_DBL_BUF1_CPLT_CB_ID : + hmmc->Read_DMADblBuf1CpltCallback = HAL_MMCEx_Read_DMADoubleBuf1CpltCallback; + break; + case HAL_MMC_WRITE_DMA_DBL_BUF0_CPLT_CB_ID : + hmmc->Write_DMADblBuf0CpltCallback = HAL_MMCEx_Write_DMADoubleBuf0CpltCallback; + break; + case HAL_MMC_WRITE_DMA_DBL_BUF1_CPLT_CB_ID : + hmmc->Write_DMADblBuf1CpltCallback = HAL_MMCEx_Write_DMADoubleBuf1CpltCallback; + break; + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = HAL_MMC_MspInit; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = HAL_MMC_MspDeInit; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hmmc->State == HAL_MMC_STATE_RESET) + { + switch (CallbackId) + { + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = HAL_MMC_MspInit; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = HAL_MMC_MspDeInit; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup MMC_Exported_Functions_Group3 + * @brief management functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the MMC card + operations and get the related information + +@endverbatim + * @{ + */ + +/** + * @brief Returns information the information of the card which are stored on + * the CID register. + * @param hmmc: Pointer to MMC handle + * @param pCID: Pointer to a HAL_MMC_CIDTypedef structure that + * contains all CID register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID) +{ + pCID->ManufacturerID = (uint8_t)((hmmc->CID[0] & 0xFF000000U) >> 24U); + + pCID->OEM_AppliID = (uint16_t)((hmmc->CID[0] & 0x00FFFF00U) >> 8U); + + pCID->ProdName1 = (((hmmc->CID[0] & 0x000000FFU) << 24U) | ((hmmc->CID[1] & 0xFFFFFF00U) >> 8U)); + + pCID->ProdName2 = (uint8_t)(hmmc->CID[1] & 0x000000FFU); + + pCID->ProdRev = (uint8_t)((hmmc->CID[2] & 0xFF000000U) >> 24U); + + pCID->ProdSN = (((hmmc->CID[2] & 0x00FFFFFFU) << 8U) | ((hmmc->CID[3] & 0xFF000000U) >> 24U)); + + pCID->Reserved1 = (uint8_t)((hmmc->CID[3] & 0x00F00000U) >> 20U); + + pCID->ManufactDate = (uint16_t)((hmmc->CID[3] & 0x000FFF00U) >> 8U); + + pCID->CID_CRC = (uint8_t)((hmmc->CID[3] & 0x000000FEU) >> 1U); + + pCID->Reserved2 = 1U; + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the CSD register. + * @param hmmc: Pointer to MMC handle + * @param pCSD: Pointer to a HAL_MMC_CardCSDTypeDef structure that + * contains all CSD register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD) +{ + uint32_t block_nbr = 0; + + pCSD->CSDStruct = (uint8_t)((hmmc->CSD[0] & 0xC0000000U) >> 30U); + + pCSD->SysSpecVersion = (uint8_t)((hmmc->CSD[0] & 0x3C000000U) >> 26U); + + pCSD->Reserved1 = (uint8_t)((hmmc->CSD[0] & 0x03000000U) >> 24U); + + pCSD->TAAC = (uint8_t)((hmmc->CSD[0] & 0x00FF0000U) >> 16U); + + pCSD->NSAC = (uint8_t)((hmmc->CSD[0] & 0x0000FF00U) >> 8U); + + pCSD->MaxBusClkFrec = (uint8_t)(hmmc->CSD[0] & 0x000000FFU); + + pCSD->CardComdClasses = (uint16_t)((hmmc->CSD[1] & 0xFFF00000U) >> 20U); + + pCSD->RdBlockLen = (uint8_t)((hmmc->CSD[1] & 0x000F0000U) >> 16U); + + pCSD->PartBlockRead = (uint8_t)((hmmc->CSD[1] & 0x00008000U) >> 15U); + + pCSD->WrBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00004000U) >> 14U); + + pCSD->RdBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00002000U) >> 13U); + + pCSD->DSRImpl = (uint8_t)((hmmc->CSD[1] & 0x00001000U) >> 12U); + + pCSD->Reserved2 = 0U; /*!< Reserved */ + + if (MMC_ReadExtCSD(hmmc, &block_nbr, 212, 0x0FFFFFFFU) != HAL_OK) /* Field SEC_COUNT [215:212] */ + { + return HAL_ERROR; + } + + if (hmmc->MmcCard.CardType == MMC_LOW_CAPACITY_CARD) + { + pCSD->DeviceSize = (((hmmc->CSD[1] & 0x000003FFU) << 2U) | ((hmmc->CSD[2] & 0xC0000000U) >> 30U)); + + pCSD->MaxRdCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x38000000U) >> 27U); + + pCSD->MaxRdCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x07000000U) >> 24U); + + pCSD->MaxWrCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x00E00000U) >> 21U); + + pCSD->MaxWrCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x001C0000U) >> 18U); + + pCSD->DeviceSizeMul = (uint8_t)((hmmc->CSD[2] & 0x00038000U) >> 15U); + + hmmc->MmcCard.BlockNbr = (pCSD->DeviceSize + 1U) ; + hmmc->MmcCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U)); + hmmc->MmcCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU)); + + hmmc->MmcCard.LogBlockNbr = (hmmc->MmcCard.BlockNbr) * ((hmmc->MmcCard.BlockSize) / 512U); + hmmc->MmcCard.LogBlockSize = 512U; + } + else if (hmmc->MmcCard.CardType == MMC_HIGH_CAPACITY_CARD) + { + hmmc->MmcCard.BlockNbr = block_nbr; + hmmc->MmcCard.LogBlockNbr = hmmc->MmcCard.BlockNbr; + hmmc->MmcCard.BlockSize = 512U; + hmmc->MmcCard.LogBlockSize = hmmc->MmcCard.BlockSize; + } + else + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + pCSD->EraseGrSize = (uint8_t)((hmmc->CSD[2] & 0x00004000U) >> 14U); + + pCSD->EraseGrMul = (uint8_t)((hmmc->CSD[2] & 0x00003F80U) >> 7U); + + pCSD->WrProtectGrSize = (uint8_t)(hmmc->CSD[2] & 0x0000007FU); + + pCSD->WrProtectGrEnable = (uint8_t)((hmmc->CSD[3] & 0x80000000U) >> 31U); + + pCSD->ManDeflECC = (uint8_t)((hmmc->CSD[3] & 0x60000000U) >> 29U); + + pCSD->WrSpeedFact = (uint8_t)((hmmc->CSD[3] & 0x1C000000U) >> 26U); + + pCSD->MaxWrBlockLen = (uint8_t)((hmmc->CSD[3] & 0x03C00000U) >> 22U); + + pCSD->WriteBlockPaPartial = (uint8_t)((hmmc->CSD[3] & 0x00200000U) >> 21U); + + pCSD->Reserved3 = 0; + + pCSD->ContentProtectAppli = (uint8_t)((hmmc->CSD[3] & 0x00010000U) >> 16U); + + pCSD->FileFormatGroup = (uint8_t)((hmmc->CSD[3] & 0x00008000U) >> 15U); + + pCSD->CopyFlag = (uint8_t)((hmmc->CSD[3] & 0x00004000U) >> 14U); + + pCSD->PermWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00002000U) >> 13U); + + pCSD->TempWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00001000U) >> 12U); + + pCSD->FileFormat = (uint8_t)((hmmc->CSD[3] & 0x00000C00U) >> 10U); + + pCSD->ECC = (uint8_t)((hmmc->CSD[3] & 0x00000300U) >> 8U); + + pCSD->CSD_CRC = (uint8_t)((hmmc->CSD[3] & 0x000000FEU) >> 1U); + + pCSD->Reserved4 = 1; + + return HAL_OK; +} + +/** + * @brief Gets the MMC card info. + * @param hmmc: Pointer to MMC handle + * @param pCardInfo: Pointer to the HAL_MMC_CardInfoTypeDef structure that + * will contain the MMC card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo) +{ + pCardInfo->CardType = (uint32_t)(hmmc->MmcCard.CardType); + pCardInfo->Class = (uint32_t)(hmmc->MmcCard.Class); + pCardInfo->RelCardAdd = (uint32_t)(hmmc->MmcCard.RelCardAdd); + pCardInfo->BlockNbr = (uint32_t)(hmmc->MmcCard.BlockNbr); + pCardInfo->BlockSize = (uint32_t)(hmmc->MmcCard.BlockSize); + pCardInfo->LogBlockNbr = (uint32_t)(hmmc->MmcCard.LogBlockNbr); + pCardInfo->LogBlockSize = (uint32_t)(hmmc->MmcCard.LogBlockSize); + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the Extended CSD register. + * @param hmmc Pointer to MMC handle + * @param pExtCSD Pointer to a memory area (512 bytes) that contains all + * Extended CSD register parameters + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t *tmp_buf; + + if (NULL == pExtCSD) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0; + + /* Initiaize the destination pointer */ + tmp_buf = pExtCSD; + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 512U; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Send ExtCSD Read command to Card */ + errorstate = SDMMC_CmdSendEXTCSD(hmmc->Instance, 0); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR | + SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < 8U; count++) + { + *tmp_buf = SDMMC_ReadFIFO(hmmc->Instance); + tmp_buf++; + } + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + hmmc->State = HAL_MMC_STATE_READY; + } + + return HAL_OK; +} + +/** + * @brief Enables wide bus operation for the requested card if supported by + * card. + * @param hmmc: Pointer to MMC handle + * @param WideMode: Specifies the MMC card wide bus mode + * This parameter can be one of the following values: + * @arg SDMMC_BUS_WIDE_8B: 8-bit data transfer + * @arg SDMMC_BUS_WIDE_4B: 4-bit data transfer + * @arg SDMMC_BUS_WIDE_1B: 1-bit data transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode) +{ + uint32_t count; + SDMMC_InitTypeDef Init; + uint32_t errorstate; + uint32_t response = 0U; + + /* Check the parameters */ + assert_param(IS_SDMMC_BUS_WIDE(WideMode)); + + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check and update the power class if needed */ + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) != 0U) + { + errorstate = MMC_PwrClassUpdate(hmmc, WideMode, SDMMC_SPEED_MODE_DDR); + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, WideMode, SDMMC_SPEED_MODE_HIGH); + } + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, WideMode, SDMMC_SPEED_MODE_DEFAULT); + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (WideMode == SDMMC_BUS_WIDE_8B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U); + } + else if (WideMode == SDMMC_BUS_WIDE_4B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U); + } + else if (WideMode == SDMMC_BUS_WIDE_1B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70000U); + } + else + { + /* WideMode is not a valid argument*/ + errorstate = HAL_MMC_ERROR_PARAM; + } + + /* Check for switch error and violation of the trial number of sending CMD 13 */ + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + else + { + /* Configure the SDMMC peripheral */ + Init = hmmc->Init; + Init.BusWide = WideMode; + (void)SDMMC_Init(hmmc->Instance, Init); + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Configure the speed bus mode + * @param hmmc: Pointer to the MMC handle + * @param SpeedMode: Specifies the MMC card speed bus mode + * This parameter can be one of the following values: + * @arg SDMMC_SPEED_MODE_AUTO: Max speed mode supported by the card + * @arg SDMMC_SPEED_MODE_DEFAULT: Default Speed (MMC @ 26MHz) + * @arg SDMMC_SPEED_MODE_HIGH: High Speed (MMC @ 52 MHz) + * @arg SDMMC_SPEED_MODE_DDR: High Speed DDR (MMC DDR @ 52 MHz) + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_MMC_ConfigSpeedBusOperation(MMC_HandleTypeDef *hmmc, uint32_t SpeedMode) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + uint32_t device_type; + uint32_t errorstate; + + /* Check the parameters */ + assert_param(IS_SDMMC_SPEED_MODE(SpeedMode)); + + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Field DEVICE_TYPE [196 = 49*4] of Extended CSD register */ + device_type = (hmmc->Ext_CSD[49] & 0x000000FFU); + + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS) != 0U) && ((device_type & 0x04U) != 0U)) + { + /* High Speed DDR mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + else + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_CLKDIV) != 0U) + { + /* DDR mode not supported with CLKDIV = 0 */ + errorstate = MMC_DDR_Mode(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + } + } + else if ((device_type & 0x02U) != 0U) + { + /* High Speed mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + else + { + /* Nothing to do : keep current speed */ + } + break; + } + case SDMMC_SPEED_MODE_DDR: + { + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS) != 0U) && ((device_type & 0x04U) != 0U)) + { + /* High Speed DDR mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + else + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_CLKDIV) != 0U) + { + /* DDR mode not supported with CLKDIV = 0 */ + errorstate = MMC_DDR_Mode(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + } + } + else + { + /* High Speed DDR mode not allowed */ + hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((device_type & 0x02U) != 0U) + { + /* High Speed mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + else + { + /* High Speed mode not allowed */ + hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) != 0U) + { + /* High Speed DDR mode activated */ + errorstate = MMC_DDR_Mode(hmmc, DISABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) + { + /* High Speed mode activated */ + errorstate = MMC_HighSpeed(hmmc, DISABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + break; + } + default: + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + status = HAL_ERROR; + break; + } + + /* Verify that MMC card is ready to use after Speed mode switch*/ + tickstart = HAL_GetTick(); + while ((HAL_MMC_GetCardState(hmmc) != HAL_MMC_CARD_TRANSFER)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + return status; +} + +/** + * @brief Gets the current mmc card data state. + * @param hmmc: pointer to MMC handle + * @retval Card state + */ +HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc) +{ + uint32_t cardstate; + uint32_t errorstate; + uint32_t resp1 = 0U; + + errorstate = MMC_SendStatus(hmmc, &resp1); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + cardstate = ((resp1 >> 9U) & 0x0FU); + + return (HAL_MMC_CardStateTypeDef)cardstate; +} + +/** + * @brief Abort the current transfer and disable the MMC. + * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains + * the configuration information for MMC module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc) +{ + uint32_t error_code; + uint32_t tickstart; + + if (hmmc->State == HAL_MMC_STATE_BUSY) + { + /* DIsable All interrupts */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /*we will send the CMD12 in all cases in order to stop the data transfers*/ + /*In case the data transfer just finished , the external memory will not respond and will return HAL_MMC_ERROR_CMD_RSP_TIMEOUT*/ + /*In case the data transfer aborted , the external memory will respond and will return HAL_MMC_ERROR_NONE*/ + /*Other scenario will return HAL_ERROR*/ + + hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance); + error_code = hmmc->ErrorCode; + if ((error_code != HAL_MMC_ERROR_NONE) && (error_code != HAL_MMC_ERROR_CMD_RSP_TIMEOUT)) + { + return HAL_ERROR; + } + + tickstart = HAL_GetTick(); + if ((hmmc->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_CARD) + { + if (hmmc->ErrorCode == HAL_MMC_ERROR_NONE) + { + while(!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DABORT | SDMMC_FLAG_BUSYD0END)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + } + + if (hmmc->ErrorCode == HAL_MMC_ERROR_CMD_RSP_TIMEOUT) + { + while(!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + else if ((hmmc->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_SDMMC) + { + while(!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DABORT | SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + } + else + { + /* Nothing to do*/ + } + + /*The reason of all these while conditions previously is that we need to wait the SDMMC and clear the appropriate flags that will be set depending of the abort/non abort of the memory */ + /*Not waiting the SDMMC flags will cause the next SDMMC_DISABLE_IDMA to not get cleared and will result in next SDMMC read/write operation to fail */ + + /*SDMMC ready for clear data flags*/ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* If IDMA Context, disable Internal DMA */ + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + hmmc->State = HAL_MMC_STATE_READY; + + /* Initialize the MMC operation */ + hmmc->Context = MMC_CONTEXT_NONE; + } + return HAL_OK; +} +/** + * @brief Abort the current transfer and disable the MMC (IT mode). + * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains + * the configuration information for MMC module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc) +{ + HAL_MMC_CardStateTypeDef CardState; + + /* DIsable All interrupts */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + /* If IDMA Context, disable Internal DMA */ + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Clear All flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + CardState = HAL_MMC_GetCardState(hmmc); + hmmc->State = HAL_MMC_STATE_READY; + + if ((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING)) + { + hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance); + } + if (hmmc->ErrorCode != HAL_MMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->AbortCpltCallback(hmmc); +#else + HAL_MMC_AbortCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Perform specific commands sequence for the different type of erase. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param EraseType Specifies the type of erase to be performed + * This parameter can be one of the following values: + * @arg HAL_MMC_TRIM Erase the write blocks identified by CMD35 & 36 + * @arg HAL_MMC_ERASE Erase the erase groups identified by CMD35 & 36 + * @arg HAL_MMC_DISCARD Discard the write blocks identified by CMD35 & 36 + * @arg HAL_MMC_SECURE_ERASE Perform a secure purge according SRT on the erase groups identified + * by CMD35 & 36 + * @arg HAL_MMC_SECURE_TRIM_STEP1 Mark the write blocks identified by CMD35 & 36 for secure erase + * @arg HAL_MMC_SECURE_TRIM_STEP2 Perform a secure purge according SRT on the write blocks + * previously identified + * @param BlockStartAdd Start Block address + * @param BlockEndAdd End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_EraseSequence(MMC_HandleTypeDef *hmmc, uint32_t EraseType, + uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate; + uint32_t start_add = BlockStartAdd; + uint32_t end_add = BlockEndAdd; + uint32_t tickstart = HAL_GetTick(); + + /* Check the erase type value is correct */ + assert_param(IS_MMC_ERASE_TYPE(EraseType)); + + /* Check the coherence between start and end address */ + if (end_add < start_add) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + /* Check that the end address is not out of range of device memory */ + if (end_add > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if (((start_add % 8U) != 0U) || ((end_add % 8U) != 0U)) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + /* Check if the card command class supports erase command */ + if (((hmmc->MmcCard.Class) & SDMMC_CCCC_ERASE) == 0U) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + return HAL_ERROR; + } + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check that the card is not locked */ + if ((SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_LOCK_UNLOCK_FAILED; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* In case of low capacity card, the address is not block number but bytes */ + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + start_add *= 512U; + end_add *= 512U; + } + + /* Send CMD35 MMC_ERASE_GRP_START with start address as argument */ + errorstate = SDMMC_CmdEraseStartAdd(hmmc->Instance, start_add); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Send CMD36 MMC_ERASE_GRP_END with end address as argument */ + errorstate = SDMMC_CmdEraseEndAdd(hmmc->Instance, end_add); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Send CMD38 ERASE with erase type as argument */ + errorstate = SDMMC_CmdErase(hmmc->Instance, EraseType); + if (errorstate == HAL_MMC_ERROR_NONE) + { + if ((EraseType == HAL_MMC_SECURE_ERASE) || (EraseType == HAL_MMC_SECURE_TRIM_STEP2)) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_MAXERASETIMEOUT) + { + errorstate = HAL_MMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + } + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Perform sanitize operation on the device. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Sanitize(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + uint32_t response = 0U; + uint32_t count; + uint32_t tickstart = HAL_GetTick(); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Index : 165 - Value : 0x01 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03A50100U); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_MAXERASETIMEOUT) + { + errorstate = HAL_MMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure the Secure Removal Type (SRT) in the Extended CSD register. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param SRTMode Specifies the type of erase to be performed + * This parameter can be one of the following values: + * @arg HAL_MMC_SRT_ERASE Information removed by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_ERASE Information removed by an overwriting with a character + * followed by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM Information removed by an overwriting with a character, + * its complement then a random character + * @arg HAL_MMC_SRT_VENDOR_DEFINED Information removed using a vendor defined + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ConfigSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t SRTMode) +{ + uint32_t srt; + uint32_t errorstate; + uint32_t response = 0U; + uint32_t count; + + /* Check the erase type value is correct */ + assert_param(IS_MMC_SRT_TYPE(SRTMode)); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Get the supported values by the device */ + if (HAL_MMC_GetSupportedSecRemovalType(hmmc, &srt) == HAL_OK) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check the value passed as parameter is supported by the device */ + if ((SRTMode & srt) != 0U) + { + /* Index : 16 - Value : SRTMode */ + srt |= ((POSITION_VAL(SRTMode)) << 4U); + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03100000U | (srt << 8U))); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + else + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + } + else + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Gets the supported values of the the Secure Removal Type (SRT). + * @param hmmc pointer to MMC handle + * @param SupportedSRT pointer for supported SRT value + * This parameter is a bit field of the following values: + * @arg HAL_MMC_SRT_ERASE Information removed by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_ERASE Information removed by an overwriting with a character followed + * by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM Information removed by an overwriting with a character, + * its complement then a random character + * @arg HAL_MMC_SRT_VENDOR_DEFINED Information removed using a vendor defined + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetSupportedSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t *SupportedSRT) +{ + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Read field SECURE_REMOVAL_TYPE [16 = 4*4] of the Extended CSD register */ + *SupportedSRT = (hmmc->Ext_CSD[4] & 0x0000000FU); /* Bits [3:0] of field 16 */ + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Switch the device from Standby State to Sleep State. + * @param hmmc pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_SleepDevice(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate, + sleep_timeout, + timeout, + count, + response = 0U ; + uint32_t tickstart = HAL_GetTick(); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Set the power-off notification to powered-on : Ext_CSD[34] = 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03220100U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Set the power-off notification to sleep notification : Ext_CSD[34] = 4 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03220400U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Field SLEEP_NOTIFICATION_TIME [216] */ + sleep_timeout = ((hmmc->Ext_CSD[(MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_INDEX / 4)] >> + MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_POS) & 0x000000FFU); + + /* Sleep/Awake Timeout = 10us * 2^SLEEP_NOTIFICATION_TIME */ + /* In HAL, the tick interrupt occurs each ms */ + if ((sleep_timeout == 0U) || (sleep_timeout > 0x17U)) + { + sleep_timeout = 0x17U; /* Max register value defined is 0x17 */ + } + timeout = (((1UL << sleep_timeout) / 100U) + 1U); + + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= timeout) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, + (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Switch the device in stand-by mode */ + (void)SDMMC_CmdSelDesel(hmmc->Instance, 0U); + + /* Field S_A_TIEMOUT [217] */ + sleep_timeout = ((hmmc->Ext_CSD[(MMC_EXT_CSD_S_A_TIMEOUT_INDEX / 4)] >> + MMC_EXT_CSD_S_A_TIMEOUT_POS) & 0x000000FFU); + + /* Sleep/Awake Timeout = 100ns * 2^S_A_TIMEOUT */ + /* In HAL, the tick interrupt occurs each ms */ + if ((sleep_timeout == 0U) || (sleep_timeout > 0x17U)) + { + sleep_timeout = 0x17U; /* Max register value defined is 0x17 */ + } + timeout = (((1UL << sleep_timeout) / 10000U) + 1U); + + if (HAL_MMC_GetCardState(hmmc) == HAL_MMC_CARD_STANDBY) + { + /* Send CMD5 CMD_MMC_SLEEP_AWAKE with RCA and SLEEP as argument */ + errorstate = SDMMC_CmdSleepMmc(hmmc->Instance, + ((hmmc->MmcCard.RelCardAdd << 16U) | (0x1U << 15U))); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= timeout) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + } + } + else + { + errorstate = SDMMC_ERROR_REQUEST_NOT_APPLICABLE; + } + } + } + else + { + /* Nothing to do */ + } + } + } + } + } + else + { + /* Nothing to do */ + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Switch the device from Sleep State to Standby State. + * @param hmmc pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_AwakeDevice(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + uint32_t sleep_timeout; + uint32_t timeout; + uint32_t count; + uint32_t response = 0U; + uint32_t tickstart = HAL_GetTick(); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Field S_A_TIEMOUT [217] */ + sleep_timeout = ((hmmc->Ext_CSD[(MMC_EXT_CSD_S_A_TIMEOUT_INDEX / 4)] >> MMC_EXT_CSD_S_A_TIMEOUT_POS) & + 0x000000FFU); + + /* Sleep/Awake Timeout = 100ns * 2^S_A_TIMEOUT */ + /* In HAL, the tick interrupt occurs each ms */ + if ((sleep_timeout == 0U) || (sleep_timeout > 0x17U)) + { + sleep_timeout = 0x17U; /* Max register value defined is 0x17 */ + } + timeout = (((1UL << sleep_timeout) / 10000U) + 1U); + + /* Send CMD5 CMD_MMC_SLEEP_AWAKE with RCA and AWAKE as argument */ + errorstate = SDMMC_CmdSleepMmc(hmmc->Instance, (hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= timeout) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (HAL_MMC_GetCardState(hmmc) == HAL_MMC_CARD_STANDBY) + { + /* Switch the device in transfer mode */ + errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (HAL_MMC_GetCardState(hmmc) == HAL_MMC_CARD_TRANSFER) + { + /* Set the power-off notification to powered-on : Ext_CSD[34] = 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03220100U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, + (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + } + else + { + /* NOthing to do */ + } + } + } + else + { + errorstate = SDMMC_ERROR_REQUEST_NOT_APPLICABLE; + } + } + } + else + { + errorstate = SDMMC_ERROR_REQUEST_NOT_APPLICABLE; + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup MMC_Private_Functions + * @{ + */ + + +/** + * @brief Initializes the mmc card. + * @param hmmc: Pointer to MMC handle + * @retval MMC Card error state + */ +static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc) +{ + HAL_MMC_CardCSDTypeDef CSD; + uint32_t errorstate; + uint16_t mmc_rca = 2U; + MMC_InitTypeDef Init; + + /* Check the power State */ + if (SDMMC_GetPowerState(hmmc->Instance) == 0U) + { + /* Power off */ + return HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + } + + /* Send CMD2 ALL_SEND_CID */ + errorstate = SDMMC_CmdSendCID(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card identification number data */ + hmmc->CID[0U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + hmmc->CID[1U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP2); + hmmc->CID[2U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP3); + hmmc->CID[3U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP4); + } + + /* Send CMD3 SET_REL_ADDR with RCA = 2 (should be greater than 1) */ + /* MMC Card publishes its RCA. */ + errorstate = SDMMC_CmdSetRelAddMmc(hmmc->Instance, mmc_rca); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + /* Get the MMC card RCA */ + hmmc->MmcCard.RelCardAdd = mmc_rca; + + /* Send CMD9 SEND_CSD with argument as card's RCA */ + errorstate = SDMMC_CmdSendCSD(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card Specific Data */ + hmmc->CSD[0U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + hmmc->CSD[1U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP2); + hmmc->CSD[2U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP3); + hmmc->CSD[3U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP4); + } + + /* Get the Card Class */ + hmmc->MmcCard.Class = (SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP2) >> 20U); + + /* Select the Card */ + errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + /* Get CSD parameters */ + if (HAL_MMC_GetCardCSD(hmmc, &CSD) != HAL_OK) + { + return hmmc->ErrorCode; + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + + /* Get Extended CSD parameters */ + if (HAL_MMC_GetCardExtCSD(hmmc, hmmc->Ext_CSD, SDMMC_DATATIMEOUT) != HAL_OK) + { + return hmmc->ErrorCode; + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + /* Configure the SDMMC peripheral */ + Init = hmmc->Init; + Init.BusWide = SDMMC_BUS_WIDE_1B; + (void)SDMMC_Init(hmmc->Instance, Init); + + /* All cards are initialized */ + return HAL_MMC_ERROR_NONE; +} + +/** + * @brief Enquires cards about their operating voltage and configures clock + * controls and stores MMC information that will be needed in future + * in the MMC handle. + * @param hmmc: Pointer to MMC handle + * @retval error state + */ +static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc) +{ + __IO uint32_t count = 0U; + uint32_t response = 0U; + uint32_t validvoltage = 0U; + uint32_t errorstate; + + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + while (validvoltage == 0U) + { + if (count++ == SDMMC_MAX_VOLT_TRIAL) + { + return HAL_MMC_ERROR_INVALID_VOLTRANGE; + } + + /* SEND CMD1 APP_CMD with voltage range as argument */ + errorstate = SDMMC_CmdOpCondition(hmmc->Instance, MMC_VOLTAGE_RANGE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31U) == 1U) ? 1U : 0U); + } + + /* When power routine is finished and command returns valid voltage */ + if (((response & (0xFF000000U)) >> 24) == 0xC0U) + { + hmmc->MmcCard.CardType = MMC_HIGH_CAPACITY_CARD; + } + else + { + hmmc->MmcCard.CardType = MMC_LOW_CAPACITY_CARD; + } + + return HAL_MMC_ERROR_NONE; +} + +/** + * @brief Turns the SDMMC output signals off. + * @param hmmc: Pointer to MMC handle + * @retval None + */ +static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc) +{ + /* Set Power State to OFF */ + (void)SDMMC_PowerState_OFF(hmmc->Instance); +} + +/** + * @brief Returns the current card's status. + * @param hmmc: Pointer to MMC handle + * @param pCardStatus: pointer to the buffer that will contain the MMC card + * status (Card Status register) + * @retval error state + */ +static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus) +{ + uint32_t errorstate; + + if (pCardStatus == NULL) + { + return HAL_MMC_ERROR_PARAM; + } + + /* Send Status command */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + /* Get MMC card status */ + *pCardStatus = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + + return HAL_MMC_ERROR_NONE; +} + +/** + * @brief Reads extended CSD register to get the sectors number of the device + * @param hmmc: Pointer to MMC handle + * @param pFieldData: Pointer to the read buffer + * @param FieldIndex: Index of the field to be read + * @param Timeout: Specify timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef MMC_ReadExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pFieldData, + uint16_t FieldIndex, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t i = 0; + uint32_t tmp_data; + + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0; + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 512U; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_ENABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdSendEXTCSD(hmmc->Instance, 0); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < 8U; count++) + { + tmp_data = SDMMC_ReadFIFO(hmmc->Instance); + /* eg : SEC_COUNT : FieldIndex = 212 => i+count = 53 */ + /* DEVICE_TYPE : FieldIndex = 196 => i+count = 49 */ + if ((i + count) == ((uint32_t)FieldIndex / 4U)) + { + *pFieldData = tmp_data; + } + } + i += 8U; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Wrap up reading in non-blocking mode. + * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void MMC_Read_IT(MMC_HandleTypeDef *hmmc) +{ + uint32_t count; + uint32_t data; + uint8_t *tmp; + + tmp = hmmc->pRxBuffPtr; + + if (hmmc->RxXferSize >= 32U) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tmp = (uint8_t)(data & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 8U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 16U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 24U) & 0xFFU); + tmp++; + } + + hmmc->pRxBuffPtr = tmp; + hmmc->RxXferSize -= 32U; + } +} + +/** + * @brief Wrap up writing in non-blocking mode. + * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void MMC_Write_IT(MMC_HandleTypeDef *hmmc) +{ + uint32_t count; + uint32_t data; + const uint8_t *tmp; + + tmp = hmmc->pTxBuffPtr; + + if (hmmc->TxXferSize >= 32U) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = (uint32_t)(*tmp); + tmp++; + data |= ((uint32_t)(*tmp) << 8U); + tmp++; + data |= ((uint32_t)(*tmp) << 16U); + tmp++; + data |= ((uint32_t)(*tmp) << 24U); + tmp++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + } + + hmmc->pTxBuffPtr = tmp; + hmmc->TxXferSize -= 32U; + } +} + +/** + * @brief Switches the MMC card to high speed mode. + * @param hmmc: MMC handle + * @param state: State of high speed mode + * @retval MMC Card error state + */ +static uint32_t MMC_HighSpeed(MMC_HandleTypeDef *hmmc, FunctionalState state) +{ + uint32_t errorstate = HAL_MMC_ERROR_NONE; + uint32_t response = 0U; + uint32_t count; + uint32_t sdmmc_clk; + SDMMC_InitTypeDef Init; + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) && (state == DISABLE)) + { + errorstate = MMC_PwrClassUpdate(hmmc, (hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS), SDMMC_SPEED_MODE_DEFAULT); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 185 - Value : 0 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B90000U); + } + } + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) == 0U) && (state != DISABLE)) + { + errorstate = MMC_PwrClassUpdate(hmmc, (hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS), SDMMC_SPEED_MODE_HIGH); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 185 - Value : 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B90100U); + } + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Configure high speed */ + Init.ClockEdge = hmmc->Init.ClockEdge; + Init.ClockPowerSave = hmmc->Init.ClockPowerSave; + Init.BusWide = (hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS); + Init.HardwareFlowControl = hmmc->Init.HardwareFlowControl; + + if (state == DISABLE) + { + Init.ClockDiv = hmmc->Init.ClockDiv; + (void)SDMMC_Init(hmmc->Instance, Init); + + CLEAR_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED); + } + else + { + /* High Speed Clock should be less or equal to 52MHz*/ + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC); + + if (sdmmc_clk == 0U) + { + errorstate = SDMMC_ERROR_INVALID_PARAMETER; + } + else + { + if (sdmmc_clk <= MMC_HIGH_SPEED_FREQ) + { + Init.ClockDiv = 0; + } + else + { + Init.ClockDiv = (sdmmc_clk / (2U * MMC_HIGH_SPEED_FREQ)) + 1U; + } + (void)SDMMC_Init(hmmc->Instance, Init); + + SET_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED); + } + } + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + + return errorstate; +} + +/** + * @brief Switches the MMC card to Double Data Rate (DDR) mode. + * @param hmmc: MMC handle + * @param state: State of DDR mode + * @retval MMC Card error state + */ +static uint32_t MMC_DDR_Mode(MMC_HandleTypeDef *hmmc, FunctionalState state) +{ + uint32_t errorstate = HAL_MMC_ERROR_NONE; + uint32_t response = 0U; + uint32_t count; + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) != 0U) && (state == DISABLE)) + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS_0) != 0U) + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_4B, SDMMC_SPEED_MODE_HIGH); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U); + } + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_8B, SDMMC_SPEED_MODE_HIGH); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 2 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U); + } + } + } + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) == 0U) && (state != DISABLE)) + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS_0) != 0U) + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_4B, SDMMC_SPEED_MODE_DDR); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 5 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70500U); + } + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_8B, SDMMC_SPEED_MODE_DDR); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 6 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70600U); + } + } + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Configure DDR mode */ + if (state == DISABLE) + { + CLEAR_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_DDR); + } + else + { + SET_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_DDR); + } + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + + return errorstate; +} + +/** + * @brief Update the power class of the device. + * @param hmmc MMC handle + * @param Wide Wide of MMC bus + * @param Speed Speed of the MMC bus + * @retval MMC Card error state + */ +static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide, uint32_t Speed) +{ + uint32_t count; + uint32_t response = 0U; + uint32_t errorstate = HAL_MMC_ERROR_NONE; + uint32_t power_class; + uint32_t supported_pwr_class; + + if ((Wide == SDMMC_BUS_WIDE_8B) || (Wide == SDMMC_BUS_WIDE_4B)) + { + power_class = 0U; /* Default value after power-on or software reset */ + + /* Read the PowerClass field of the Extended CSD register */ + if (MMC_ReadExtCSD(hmmc, &power_class, 187, SDMMC_DATATIMEOUT) != HAL_OK) /* Field POWER_CLASS [187] */ + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + else + { + power_class = ((power_class >> 24U) & 0x000000FFU); + } + + /* Get the supported PowerClass field of the Extended CSD register */ + if (Speed == SDMMC_SPEED_MODE_DDR) + { + /* Field PWR_CL_DDR_52_xxx [238 or 239] */ + supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_DDR_52_INDEX / 4)] >> MMC_EXT_CSD_PWR_CL_DDR_52_POS) & + 0x000000FFU); + } + else if (Speed == SDMMC_SPEED_MODE_HIGH) + { + /* Field PWR_CL_52_xxx [200 or 202] */ + supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_52_INDEX / 4)] >> MMC_EXT_CSD_PWR_CL_52_POS) & + 0x000000FFU); + } + else + { + /* Field PWR_CL_26_xxx [201 or 203] */ + supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_26_INDEX / 4)] >> MMC_EXT_CSD_PWR_CL_26_POS) & + 0x000000FFU); + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (Wide == SDMMC_BUS_WIDE_8B) + { + /* Bit [7:4]: power class for 8-bits bus configuration - Bit [3:0]: power class for 4-bits bus configuration */ + supported_pwr_class = (supported_pwr_class >> 4U); + } + + if ((power_class & 0x0FU) != (supported_pwr_class & 0x0FU)) + { + /* Need to change current power class */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03BB0000U | ((supported_pwr_class & 0x0FU) << 8U))); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + } + } + + return errorstate; +} + +/** + * @brief Read DMA Buffer 0 Transfer completed callbacks + * @param hmmc: MMC handle + * @retval None + */ +__weak void HAL_MMCEx_Read_DMADoubleBuf0CpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMCEx_Read_DMADoubleBuf0CpltCallback can be implemented in the user file + */ +} + +/** + * @brief Read DMA Buffer 1 Transfer completed callbacks + * @param hmmc: MMC handle + * @retval None + */ +__weak void HAL_MMCEx_Read_DMADoubleBuf1CpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMCEx_Read_DMADoubleBuf1CpltCallback can be implemented in the user file + */ +} + +/** + * @brief Write DMA Buffer 0 Transfer completed callbacks + * @param hmmc: MMC handle + * @retval None + */ +__weak void HAL_MMCEx_Write_DMADoubleBuf0CpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMCEx_Write_DMADoubleBuf0CpltCallback can be implemented in the user file + */ +} + +/** + * @brief Write DMA Buffer 1 Transfer completed callbacks + * @param hmmc: MMC handle + * @retval None + */ +__weak void HAL_MMCEx_Write_DMADoubleBuf1CpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMCEx_Write_DMADoubleBuf1CpltCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* HAL_MMC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ -- cgit v1.2.3