/** ****************************************************************************** * @file stm32h7xx_hal_rng_ex.c * @author MCD Application Team * @brief Extended RNG HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Random Number Generator (RNG) peripheral: * + Lock configuration functions * + Reset the RNG * ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32h7xx_hal.h" /** @addtogroup STM32H7xx_HAL_Driver * @{ */ #if defined(RNG) /** @addtogroup RNG_Ex * @brief RNG Extended HAL module driver. * @{ */ #ifdef HAL_RNG_MODULE_ENABLED #if defined(RNG_CR_CONDRST) /* Private types -------------------------------------------------------------*/ /* Private defines -----------------------------------------------------------*/ /** @defgroup RNG_Ex_Private_Defines RNGEx Private Defines * @{ */ /* Health test control register information to use in CCM algorithm */ #define RNG_HTCFG_1 0x17590ABCU /*!< Magic number */ #if defined(RNG_VER_3_1) || defined(RNG_VER_3_0) #define RNG_HTCFG 0x000CAA74U /*!< For best latency and to be compliant with NIST */ #else /* RNG_VER_3_2 */ #define RNG_HTCFG 0x00007274U /*!< For best latency and to be compliant with NIST */ #endif /* RNG_VER_3_1 || RNG_VER_3_0 */ /** * @} */ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @addtogroup RNG_Ex_Private_Constants * @{ */ #define RNG_TIMEOUT_VALUE 2U /** * @} */ /* Private macros ------------------------------------------------------------*/ /* Private functions prototypes ----------------------------------------------*/ /* Private functions --------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup RNG_Ex_Exported_Functions * @{ */ /** @addtogroup RNG_Ex_Exported_Functions_Group1 * @brief Configuration functions * @verbatim =============================================================================== ##### Configuration and lock functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Configure the RNG with the specified parameters in the RNG_ConfigTypeDef (+) Lock RNG configuration Allows user to lock a configuration until next reset. @endverbatim * @{ */ /** * @brief Configure the RNG with the specified parameters in the * RNG_ConfigTypeDef. * @param hrng pointer to a RNG_HandleTypeDef structure that contains * the configuration information for RNG. * @param pConf: pointer to a RNG_ConfigTypeDef structure that contains * the configuration information for RNG module * @retval HAL status */ HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf) { uint32_t tickstart; uint32_t cr_value; HAL_StatusTypeDef status ; /* Check the RNG handle allocation */ if ((hrng == NULL) || (pConf == NULL)) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); assert_param(IS_RNG_CLOCK_DIVIDER(pConf->ClockDivider)); assert_param(IS_RNG_NIST_COMPLIANCE(pConf->NistCompliance)); assert_param(IS_RNG_CONFIG1(pConf->Config1)); assert_param(IS_RNG_CONFIG2(pConf->Config2)); assert_param(IS_RNG_CONFIG3(pConf->Config3)); /* Check RNG peripheral state */ if (hrng->State == HAL_RNG_STATE_READY) { /* Change RNG peripheral state */ hrng->State = HAL_RNG_STATE_BUSY; /* Disable RNG */ __HAL_RNG_DISABLE(hrng); /* RNG CR register configuration. Set value in CR register for : - NIST Compliance setting - Clock divider value - CONFIG 1, CONFIG 2 and CONFIG 3 values */ cr_value = (uint32_t)(pConf->ClockDivider | pConf->NistCompliance | (pConf->Config1 << RNG_CR_RNG_CONFIG1_Pos) | (pConf->Config2 << RNG_CR_RNG_CONFIG2_Pos) | (pConf->Config3 << RNG_CR_RNG_CONFIG3_Pos)); MODIFY_REG(hrng->Instance->CR, RNG_CR_NISTC | RNG_CR_CLKDIV | RNG_CR_RNG_CONFIG1 | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3, (uint32_t)(RNG_CR_CONDRST | cr_value)); #if defined(RNG_VER_3_2) || defined(RNG_VER_3_1) || defined(RNG_VER_3_0) /*!< magic number must be written immediately before to RNG_HTCRG */ WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG_1); /* for best latency and to be compliant with NIST */ WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG); #endif /* RNG_VER_3_2 || RNG_VER_3_1 || RNG_VER_3_0 */ /* Writing bit CONDRST=0*/ CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST); /* Get tick */ tickstart = HAL_GetTick(); /* Wait for conditioning reset process to be completed */ while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) { if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) { /* New check to avoid false timeout detection in case of prememption */ if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) { hrng->State = HAL_RNG_STATE_READY; hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; return HAL_ERROR; } } } /* Enable RNG */ __HAL_RNG_ENABLE(hrng); /* Initialize the RNG state */ hrng->State = HAL_RNG_STATE_READY; /* function status */ status = HAL_OK; } else { hrng->ErrorCode = HAL_RNG_ERROR_BUSY; status = HAL_ERROR; } /* Return the function status */ return status; } /** * @brief Get the RNG Configuration and fill parameters in the * RNG_ConfigTypeDef. * @param hrng pointer to a RNG_HandleTypeDef structure that contains * the configuration information for RNG. * @param pConf: pointer to a RNG_ConfigTypeDef structure that contains * the configuration information for RNG module * @retval HAL status */ HAL_StatusTypeDef HAL_RNGEx_GetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf) { HAL_StatusTypeDef status ; /* Check the RNG handle allocation */ if ((hrng == NULL) || (pConf == NULL)) { return HAL_ERROR; } /* Check RNG peripheral state */ if (hrng->State == HAL_RNG_STATE_READY) { /* Change RNG peripheral state */ hrng->State = HAL_RNG_STATE_BUSY; /* Get RNG parameters */ pConf->Config1 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG1) >> RNG_CR_RNG_CONFIG1_Pos) ; pConf->Config2 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG2) >> RNG_CR_RNG_CONFIG2_Pos); pConf->Config3 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG3) >> RNG_CR_RNG_CONFIG3_Pos); pConf->ClockDivider = (hrng->Instance->CR & RNG_CR_CLKDIV); pConf->NistCompliance = (hrng->Instance->CR & RNG_CR_NISTC); /* Initialize the RNG state */ hrng->State = HAL_RNG_STATE_READY; /* function status */ status = HAL_OK; } else { hrng->ErrorCode |= HAL_RNG_ERROR_BUSY; status = HAL_ERROR; } /* Return the function status */ return status; } /** * @brief RNG current configuration lock. * @note This function allows to lock RNG peripheral configuration. * Once locked, HW RNG reset has to be performed prior any further * configuration update. * @param hrng pointer to a RNG_HandleTypeDef structure that contains * the configuration information for RNG. * @retval HAL status */ HAL_StatusTypeDef HAL_RNGEx_LockConfig(RNG_HandleTypeDef *hrng) { HAL_StatusTypeDef status; /* Check the RNG handle allocation */ if (hrng == NULL) { return HAL_ERROR; } /* Check RNG peripheral state */ if (hrng->State == HAL_RNG_STATE_READY) { /* Change RNG peripheral state */ hrng->State = HAL_RNG_STATE_BUSY; /* Perform RNG configuration Lock */ MODIFY_REG(hrng->Instance->CR, RNG_CR_CONFIGLOCK, RNG_CR_CONFIGLOCK); /* Change RNG peripheral state */ hrng->State = HAL_RNG_STATE_READY; /* function status */ status = HAL_OK; } else { hrng->ErrorCode = HAL_RNG_ERROR_BUSY; status = HAL_ERROR; } /* Return the function status */ return status; } /** * @} */ /** @addtogroup RNG_Ex_Exported_Functions_Group2 * @brief Recover from seed error function * @verbatim =============================================================================== ##### Configuration and lock functions ##### =============================================================================== [..] This section provide function allowing to: (+) Recover from a seed error @endverbatim * @{ */ /** * @brief RNG sequence to recover from a seed error * @param hrng: pointer to a RNG_HandleTypeDef structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RNGEx_RecoverSeedError(RNG_HandleTypeDef *hrng) { HAL_StatusTypeDef status; /* Check the RNG handle allocation */ if (hrng == NULL) { return HAL_ERROR; } /* Check RNG peripheral state */ if (hrng->State == HAL_RNG_STATE_READY) { /* Change RNG peripheral state */ hrng->State = HAL_RNG_STATE_BUSY; /* sequence to fully recover from a seed error */ status = RNG_RecoverSeedError(hrng); } else { hrng->ErrorCode = HAL_RNG_ERROR_BUSY; status = HAL_ERROR; } /* Return the function status */ return status; } /** * @} */ /** * @} */ #endif /* RNG_CR_CONDRST */ #endif /* HAL_RNG_MODULE_ENABLED */ /** * @} */ #endif /* RNG */ /** * @} */