diff options
| author | joshua <joshua@joshuayun.com> | 2023-12-30 23:54:31 -0500 |
|---|---|---|
| committer | joshua <joshua@joshuayun.com> | 2023-12-30 23:54:31 -0500 |
| commit | 86608c6770cf08c138a2bdab5855072f64be09ef (patch) | |
| tree | 494a61b3ef37e76f9235a0d10f5c93d97290a35f /Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c | |
| download | sdr-software-master.tar.gz | |
Diffstat (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c')
| -rw-r--r-- | Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c | 1544 |
1 files changed, 1544 insertions, 0 deletions
diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c new file mode 100644 index 0000000..ac4f2da --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c @@ -0,0 +1,1544 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_nor.c
+ * @author MCD Application Team
+ * @brief NOR HAL module driver.
+ * This file provides a generic firmware to drive NOR memories mounted
+ * as external device.
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control NOR flash memories. It uses the FMC layer functions to interface
+ with NOR devices. This driver is used as follows:
+
+ (+) NOR flash memory configuration sequence using the function HAL_NOR_Init()
+ with control and timing parameters for both normal and extended mode.
+
+ (+) Read NOR flash memory manufacturer code and device IDs using the function
+ HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef
+ structure declared by the function caller.
+
+ (+) Access NOR flash memory by read/write data unit operations using the functions
+ HAL_NOR_Read(), HAL_NOR_Program().
+
+ (+) Perform NOR flash erase block/chip operations using the functions
+ HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
+
+ (+) Read the NOR flash CFI (common flash interface) IDs using the function
+ HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
+ structure declared by the function caller.
+
+ (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
+ HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation
+
+ (+) You can monitor the NOR device HAL state by calling the function
+ HAL_NOR_GetState()
+ [..]
+ (@) This driver is a set of generic APIs which handle standard NOR flash operations.
+ If a NOR flash device contains different operations and/or implementations,
+ it should be implemented separately.
+
+ *** NOR HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in NOR HAL driver.
+
+ (+) NOR_WRITE : NOR memory write data to specified address
+
+ *** Callback registration ***
+ =============================================
+ [..]
+ The compilation define USE_HAL_NOR_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ Use Functions HAL_NOR_RegisterCallback() to register a user callback,
+ it allows to register following callbacks:
+ (+) MspInitCallback : NOR MspInit.
+ (+) MspDeInitCallback : NOR MspDeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ Use function HAL_NOR_UnRegisterCallback() to reset a callback to the default
+ weak (surcharged) function. It allows to reset following callbacks:
+ (+) MspInitCallback : NOR MspInit.
+ (+) MspDeInitCallback : NOR MspDeInit.
+ This function) takes as parameters the HAL peripheral handle and the Callback ID.
+
+ By default, after the HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET
+ all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+ Exception done for MspInit and MspDeInit callbacks that are respectively
+ reset to the legacy weak (surcharged) functions in the HAL_NOR_Init
+ and HAL_NOR_DeInit only when these callbacks are null (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, the HAL_NOR_Init and HAL_NOR_DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in READY state only.
+ Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
+ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
+ during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using HAL_NOR_RegisterCallback before calling HAL_NOR_DeInit
+ or HAL_NOR_Init function.
+
+ When The compilation define USE_HAL_NOR_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ @endverbatim
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+
+/** @defgroup NOR NOR
+ * @brief NOR driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup NOR_Private_Defines NOR Private Defines
+ * @{
+ */
+
+/* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055
+#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555
+
+/* Constants to define data to program a command */
+#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0
+#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA
+#define NOR_CMD_DATA_SECOND (uint16_t)0x0055
+#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090
+#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055
+#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010
+#define NOR_CMD_DATA_CFI (uint16_t)0x0098
+
+#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25
+#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29
+#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30
+
+#define NOR_CMD_READ_ARRAY (uint16_t)0x00FF
+#define NOR_CMD_WORD_PROGRAM (uint16_t)0x0040
+#define NOR_CMD_BUFFERED_PROGRAM (uint16_t)0x00E8
+#define NOR_CMD_CONFIRM (uint16_t)0x00D0
+#define NOR_CMD_BLOCK_ERASE (uint16_t)0x0020
+#define NOR_CMD_BLOCK_UNLOCK (uint16_t)0x0060
+#define NOR_CMD_READ_STATUS_REG (uint16_t)0x0070
+#define NOR_CMD_CLEAR_STATUS_REG (uint16_t)0x0050
+
+/* Mask on NOR STATUS REGISTER */
+#define NOR_MASK_STATUS_DQ4 (uint16_t)0x0010
+#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020
+#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040
+#define NOR_MASK_STATUS_DQ7 (uint16_t)0x0080
+
+/* Address of the primary command set */
+#define NOR_ADDRESS_COMMAND_SET (uint16_t)0x0013
+
+/* Command set code assignment (defined in JEDEC JEP137B version may 2004) */
+#define NOR_INTEL_SHARP_EXT_COMMAND_SET (uint16_t)0x0001 /* Supported in this driver */
+#define NOR_AMD_FUJITSU_COMMAND_SET (uint16_t)0x0002 /* Supported in this driver */
+#define NOR_INTEL_STANDARD_COMMAND_SET (uint16_t)0x0003 /* Not Supported in this driver */
+#define NOR_AMD_FUJITSU_EXT_COMMAND_SET (uint16_t)0x0004 /* Not Supported in this driver */
+#define NOR_WINDBOND_STANDARD_COMMAND_SET (uint16_t)0x0006 /* Not Supported in this driver */
+#define NOR_MITSUBISHI_STANDARD_COMMAND_SET (uint16_t)0x0100 /* Not Supported in this driver */
+#define NOR_MITSUBISHI_EXT_COMMAND_SET (uint16_t)0x0101 /* Not Supported in this driver */
+#define NOR_PAGE_WRITE_COMMAND_SET (uint16_t)0x0102 /* Not Supported in this driver */
+#define NOR_INTEL_PERFORMANCE_COMMAND_SET (uint16_t)0x0200 /* Not Supported in this driver */
+#define NOR_INTEL_DATA_COMMAND_SET (uint16_t)0x0210 /* Not Supported in this driver */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Variables NOR Private Variables
+ * @{
+ */
+
+static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B;
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Functions NOR Exported Functions
+ * @{
+ */
+
+/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NOR Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the NOR memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform the NOR memory Initialization sequence
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param Timing pointer to NOR control timing structure
+ * @param ExtTiming pointer to NOR extended mode timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing,
+ FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+ uint32_t deviceaddress;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR handle parameter */
+ if (hnor == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if (hnor->State == HAL_NOR_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hnor->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+ if (hnor->MspInitCallback == NULL)
+ {
+ hnor->MspInitCallback = HAL_NOR_MspInit;
+ }
+
+ /* Init the low level hardware */
+ hnor->MspInitCallback(hnor);
+#else
+ /* Initialize the low level hardware (MSP) */
+ HAL_NOR_MspInit(hnor);
+#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */
+ }
+
+ /* Initialize NOR control Interface */
+ (void)FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
+
+ /* Initialize NOR timing Interface */
+ (void)FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
+
+ /* Initialize NOR extended mode timing Interface */
+ (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+
+ /* Enable the NORSRAM device */
+ __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
+
+ /* Initialize NOR Memory Data Width*/
+ if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8)
+ {
+ uwNORMemoryDataWidth = NOR_MEMORY_8B;
+ }
+ else
+ {
+ uwNORMemoryDataWidth = NOR_MEMORY_16B;
+ }
+
+ /* Enable FMC Peripheral */
+ __FMC_ENABLE();
+
+ /* Initialize the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ if (hnor->Init.WriteOperation == FMC_WRITE_OPERATION_DISABLE)
+ {
+ (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_PROTECTED;
+ }
+ else
+ {
+ /* Get the value of the command set */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+ hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET);
+
+ status = HAL_NOR_ReturnToReadMode(hnor);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Perform NOR memory De-Initialization sequence
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)
+{
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+ if (hnor->MspDeInitCallback == NULL)
+ {
+ hnor->MspDeInitCallback = HAL_NOR_MspDeInit;
+ }
+
+ /* DeInit the low level hardware */
+ hnor->MspDeInitCallback(hnor);
+#else
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_NOR_MspDeInit(hnor);
+#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */
+
+ /* Configure the NOR registers with their reset values */
+ (void)FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
+
+ /* Reset the NOR controller state */
+ hnor->State = HAL_NOR_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NOR MSP Init
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval None
+ */
+__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NOR MSP DeInit
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval None
+ */
+__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NOR MSP Wait for Ready/Busy signal
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param Timeout Maximum timeout value
+ * @retval None
+ */
+__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ UNUSED(Timeout);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspWait could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NOR Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the NOR memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read NOR flash IDs
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param pNOR_ID pointer to NOR ID structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
+{
+ uint32_t deviceaddress;
+ HAL_NOR_StateTypeDef state;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ state = hnor->State;
+ if (state == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (state == HAL_NOR_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+ else if (state == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send read ID command */
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ NOR_WRITE(deviceaddress, NOR_CMD_DATA_AUTO_SELECT);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ if (status != HAL_ERROR)
+ {
+ /* Read the NOR IDs */
+ pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
+ pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE1_ADDR);
+ pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE2_ADDR);
+ pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE3_ADDR);
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = state;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Returns the NOR memory to Read mode.
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
+{
+ uint32_t deviceaddress;
+ HAL_NOR_StateTypeDef state;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ state = hnor->State;
+ if (state == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (state == HAL_NOR_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+ else if (state == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = state;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Read data from NOR memory
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param pAddress pointer to Device address
+ * @param pData pointer to read data
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+ uint32_t deviceaddress;
+ HAL_NOR_StateTypeDef state;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ state = hnor->State;
+ if (state == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (state == HAL_NOR_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+ else if (state == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send read data command */
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ NOR_WRITE(pAddress, NOR_CMD_READ_ARRAY);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ if (status != HAL_ERROR)
+ {
+ /* Read the data */
+ *pData = (uint16_t)(*(__IO uint32_t *)pAddress);
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = state;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program data to NOR memory
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param pAddress Device address
+ * @param pData pointer to the data to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+ uint32_t deviceaddress;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ if (hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (hnor->State == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send program data command */
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ NOR_WRITE(pAddress, NOR_CMD_WORD_PROGRAM);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ if (status != HAL_ERROR)
+ {
+ /* Write the data */
+ NOR_WRITE(pAddress, *pData);
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Reads a half-word buffer from the NOR memory.
+ * @param hnor pointer to the NOR handle
+ * @param uwAddress NOR memory internal address to read from.
+ * @param pData pointer to the buffer that receives the data read from the
+ * NOR memory.
+ * @param uwBufferSize number of Half word to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData,
+ uint32_t uwBufferSize)
+{
+ uint32_t deviceaddress;
+ uint32_t size = uwBufferSize;
+ uint32_t address = uwAddress;
+ uint16_t *data = pData;
+ HAL_NOR_StateTypeDef state;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ state = hnor->State;
+ if (state == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (state == HAL_NOR_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+ else if (state == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send read data command */
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ if (status != HAL_ERROR)
+ {
+ /* Read buffer */
+ while (size > 0U)
+ {
+ *data = *(__IO uint16_t *)address;
+ data++;
+ address += 2U;
+ size--;
+ }
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = state;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Writes a half-word buffer to the NOR memory. This function must be used
+ only with S29GL128P NOR memory.
+ * @param hnor pointer to the NOR handle
+ * @param uwAddress NOR memory internal start write address
+ * @param pData pointer to source data buffer.
+ * @param uwBufferSize Size of the buffer to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData,
+ uint32_t uwBufferSize)
+{
+ uint16_t *p_currentaddress;
+ const uint16_t *p_endaddress;
+ uint16_t *data = pData;
+ uint32_t deviceaddress;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ if (hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (hnor->State == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Initialize variables */
+ p_currentaddress = (uint16_t *)(deviceaddress + uwAddress);
+ p_endaddress = (uint16_t *)(deviceaddress + uwAddress + (2U * (uwBufferSize - 1U)));
+
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ /* Issue unlock command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+
+ /* Write Buffer Load Command */
+ NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG);
+ NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U));
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ /* Write Buffer Load Command */
+ NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_BUFFERED_PROGRAM);
+ NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U));
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ if (status != HAL_ERROR)
+ {
+ /* Load Data into NOR Buffer */
+ while (p_currentaddress <= p_endaddress)
+ {
+ NOR_WRITE(p_currentaddress, *data);
+
+ data++;
+ p_currentaddress ++;
+ }
+
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
+ }
+ else /* => hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET */
+ {
+ NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_CONFIRM);
+ }
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+
+}
+
+/**
+ * @brief Erase the specified block of the NOR memory
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param BlockAddress Block to erase address
+ * @param Address Device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
+{
+ uint32_t deviceaddress;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NOR controller state */
+ if (hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (hnor->State == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send block erase command sequence */
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+ NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH),
+ NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH),
+ NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+ NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_UNLOCK);
+ NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM);
+ NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_ERASE);
+ NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ /* Check the NOR memory status and update the controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+
+}
+
+/**
+ * @brief Erase the entire NOR chip.
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param Address Device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
+{
+ uint32_t deviceaddress;
+ HAL_StatusTypeDef status = HAL_OK;
+ UNUSED(Address);
+
+ /* Check the NOR controller state */
+ if (hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (hnor->State == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send NOR chip erase command sequence */
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD),
+ NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH),
+ NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH),
+ NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_ERROR;
+ }
+
+ /* Check the NOR memory status and update the controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Read NOR flash CFI IDs
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param pNOR_CFI pointer to NOR CFI IDs structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
+{
+ uint32_t deviceaddress;
+ HAL_NOR_StateTypeDef state;
+
+ /* Check the NOR controller state */
+ state = hnor->State;
+ if (state == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (state == HAL_NOR_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+ else if (state == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Send read CFI query command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+
+ /* read the NOR CFI information */
+ pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS);
+ pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS);
+ pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS);
+ pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS);
+
+ /* Check the NOR controller state */
+ hnor->State = state;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User NOR Callback
+ * To be used instead of the weak (surcharged) predefined callback
+ * @param hnor : NOR handle
+ * @param CallbackId : ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID
+ * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID
+ * @param pCallback : pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId,
+ pNOR_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ HAL_NOR_StateTypeDef state;
+
+ if (pCallback == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hnor);
+
+ state = hnor->State;
+ if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED))
+ {
+ switch (CallbackId)
+ {
+ case HAL_NOR_MSP_INIT_CB_ID :
+ hnor->MspInitCallback = pCallback;
+ break;
+ case HAL_NOR_MSP_DEINIT_CB_ID :
+ hnor->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnor);
+ return status;
+}
+
+/**
+ * @brief Unregister a User NOR Callback
+ * NOR Callback is redirected to the weak (surcharged) predefined callback
+ * @param hnor : NOR handle
+ * @param CallbackId : ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID
+ * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ HAL_NOR_StateTypeDef state;
+
+ /* Process locked */
+ __HAL_LOCK(hnor);
+
+ state = hnor->State;
+ if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED))
+ {
+ switch (CallbackId)
+ {
+ case HAL_NOR_MSP_INIT_CB_ID :
+ hnor->MspInitCallback = HAL_NOR_MspInit;
+ break;
+ case HAL_NOR_MSP_DEINIT_CB_ID :
+ hnor->MspDeInitCallback = HAL_NOR_MspDeInit;
+ break;
+ default :
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnor);
+ return status;
+}
+#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group3 NOR Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NOR Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the NOR interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically NOR write operation.
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
+{
+ /* Check the NOR controller state */
+ if (hnor->State == HAL_NOR_STATE_PROTECTED)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Enable write operation */
+ (void)FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically NOR write operation.
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
+{
+ /* Check the NOR controller state */
+ if (hnor->State == HAL_NOR_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Disable write operation */
+ (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_PROTECTED;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group4 NOR State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NOR State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the NOR controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the NOR controller state
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval NOR controller state
+ */
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+{
+ return hnor->State;
+}
+
+/**
+ * @brief Returns the NOR operation status.
+ * @param hnor pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param Address Device address
+ * @param Timeout NOR programming Timeout
+ * @retval NOR_Status The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
+ * or HAL_NOR_STATUS_TIMEOUT
+ */
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
+{
+ HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
+ uint16_t tmpsr1;
+ uint16_t tmpsr2;
+ uint32_t tickstart;
+
+ /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
+ HAL_NOR_MspWait(hnor, Timeout);
+
+ /* Get the NOR memory operation status -------------------------------------*/
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
+ {
+ while ((status != HAL_NOR_STATUS_SUCCESS) && (status != HAL_NOR_STATUS_TIMEOUT))
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ status = HAL_NOR_STATUS_TIMEOUT;
+ }
+ }
+
+ /* Read NOR status register (DQ6 and DQ5) */
+ tmpsr1 = *(__IO uint16_t *)Address;
+ tmpsr2 = *(__IO uint16_t *)Address;
+
+ /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6))
+ {
+ return HAL_NOR_STATUS_SUCCESS ;
+ }
+
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ {
+ status = HAL_NOR_STATUS_ONGOING;
+ }
+
+ tmpsr1 = *(__IO uint16_t *)Address;
+ tmpsr2 = *(__IO uint16_t *)Address;
+
+ /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6))
+ {
+ return HAL_NOR_STATUS_SUCCESS;
+ }
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ {
+ return HAL_NOR_STATUS_ERROR;
+ }
+ }
+ }
+ else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET)
+ {
+ do
+ {
+ NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG);
+ tmpsr2 = *(__IO uint16_t *)(Address);
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ return HAL_NOR_STATUS_TIMEOUT;
+ }
+ }
+ } while ((tmpsr2 & NOR_MASK_STATUS_DQ7) == 0U);
+
+ NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG);
+ tmpsr1 = *(__IO uint16_t *)(Address);
+ if ((tmpsr1 & (NOR_MASK_STATUS_DQ5 | NOR_MASK_STATUS_DQ4)) != 0U)
+ {
+ /* Clear the Status Register */
+ NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG);
+ status = HAL_NOR_STATUS_ERROR;
+ }
+ else
+ {
+ status = HAL_NOR_STATUS_SUCCESS;
+ }
+ }
+ else
+ {
+ /* Primary command set not supported by the driver */
+ status = HAL_NOR_STATUS_ERROR;
+ }
+
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
|