diff options
Diffstat (limited to 'Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device')
9 files changed, 1615 insertions, 0 deletions
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/startup_ARMCM0.s b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/startup_ARMCM0.s new file mode 100644 index 0000000..b01f02d --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/startup_ARMCM0.s @@ -0,0 +1,242 @@ +;/**************************************************************************//**
+; * @file startup_ARMCM0.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM0 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000C00
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/system_ARMCM0.c b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/system_ARMCM0.c new file mode 100644 index 0000000..06e2138 --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/system_ARMCM0.c @@ -0,0 +1,56 @@ +/**************************************************************************//**
+ * @file system_ARMCM0.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM0 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/startup_ARMCM3.s b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/startup_ARMCM3.s new file mode 100644 index 0000000..d7e5bf3 --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/startup_ARMCM3.s @@ -0,0 +1,262 @@ +;/**************************************************************************//**
+; * @file startup_ARMCM3.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM3 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000C00
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/system_ARMCM3.c b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/system_ARMCM3.c new file mode 100644 index 0000000..7b173b3 --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/system_ARMCM3.c @@ -0,0 +1,68 @@ +/**************************************************************************//**
+ * @file system_ARMCM3.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM3 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/startup_ARMCM4.s b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/startup_ARMCM4.s new file mode 100644 index 0000000..3935a8b --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/startup_ARMCM4.s @@ -0,0 +1,262 @@ +;/**************************************************************************//**
+; * @file startup_ARMCM4.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM4 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000C00
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/system_ARMCM4.c b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/system_ARMCM4.c new file mode 100644 index 0000000..a7a3d6b --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/system_ARMCM4.c @@ -0,0 +1,83 @@ +/**************************************************************************//**
+ * @file system_ARMCM4.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM4 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+ #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+ #include "ARMCM4_FP.h"
+#else
+ #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
+ (3U << 11*2) ); /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+ SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.c b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.c new file mode 100644 index 0000000..114af76 --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.c @@ -0,0 +1,295 @@ +/**************************************************************************//**
+ * @file startup_ARMCM7.s
+ * @brief CMSIS Core Device Startup File for
+ * ARMCM7 Device Series
+ * @version V5.00
+ * @date 26. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdint.h>
+
+
+/*----------------------------------------------------------------------------
+ Linker generated Symbols
+ *----------------------------------------------------------------------------*/
+extern uint32_t __etext;
+extern uint32_t __data_start__;
+extern uint32_t __data_end__;
+extern uint32_t __copy_table_start__;
+extern uint32_t __copy_table_end__;
+extern uint32_t __zero_table_start__;
+extern uint32_t __zero_table_end__;
+extern uint32_t __bss_start__;
+extern uint32_t __bss_end__;
+extern uint32_t __StackTop;
+
+/*----------------------------------------------------------------------------
+ Exception / Interrupt Handler Function Prototype
+ *----------------------------------------------------------------------------*/
+typedef void( *pFunc )( void );
+
+
+/*----------------------------------------------------------------------------
+ External References
+ *----------------------------------------------------------------------------*/
+#ifndef __START
+extern void _start(void) __attribute__((noreturn)); /* PreeMain (C library entry point) */
+#else
+extern int __START(void) __attribute__((noreturn)); /* main entry point */
+#endif
+
+#ifndef __NO_SYSTEM_INIT
+extern void SystemInit (void); /* CMSIS System Initialization */
+#endif
+
+
+/*----------------------------------------------------------------------------
+ Internal References
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void); /* Default empty handler */
+void Reset_Handler(void); /* Reset Handler */
+
+
+/*----------------------------------------------------------------------------
+ User Initial Stack & Heap
+ *----------------------------------------------------------------------------*/
+#ifndef __STACK_SIZE
+ #define __STACK_SIZE 0x00000400
+#endif
+static uint8_t stack[__STACK_SIZE] __attribute__ ((aligned(8), used, section(".stack")));
+
+#ifndef __HEAP_SIZE
+ #define __HEAP_SIZE 0x00000C00
+#endif
+#if __HEAP_SIZE > 0
+static uint8_t heap[__HEAP_SIZE] __attribute__ ((aligned(8), used, section(".heap")));
+#endif
+
+
+/*----------------------------------------------------------------------------
+ Exception / Interrupt Handler
+ *----------------------------------------------------------------------------*/
+/* Cortex-M7 Processor Exceptions */
+void NMI_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void HardFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void MemManage_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void BusFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UsageFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void SVC_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void DebugMon_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void PendSV_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void SysTick_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+
+/* ARMCM7 Specific Interrupts */
+void WDT_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void RTC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIA_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIB_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART1_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART4_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void AACI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void ENET_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBDC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBHC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CHLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void FLEXRAY_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CAN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void LIN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void I2C_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CPU_CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART3_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void SPI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+
+
+/*----------------------------------------------------------------------------
+ Exception / Interrupt Vector table
+ *----------------------------------------------------------------------------*/
+const pFunc __Vectors[] __attribute__ ((section(".vectors"))) = {
+ /* Cortex-M7 Exceptions Handler */
+ (pFunc)((uint32_t)&__StackTop), /* Initial Stack Pointer */
+ Reset_Handler, /* Reset Handler */
+ NMI_Handler, /* NMI Handler */
+ HardFault_Handler, /* Hard Fault Handler */
+ MemManage_Handler, /* MPU Fault Handler */
+ BusFault_Handler, /* Bus Fault Handler */
+ UsageFault_Handler, /* Usage Fault Handler */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ SVC_Handler, /* SVCall Handler */
+ DebugMon_Handler, /* Debug Monitor Handler */
+ 0, /* Reserved */
+ PendSV_Handler, /* PendSV Handler */
+ SysTick_Handler, /* SysTick Handler */
+
+ /* External interrupts */
+ WDT_IRQHandler, /* 0: Watchdog Timer */
+ RTC_IRQHandler, /* 1: Real Time Clock */
+ TIM0_IRQHandler, /* 2: Timer0 / Timer1 */
+ TIM2_IRQHandler, /* 3: Timer2 / Timer3 */
+ MCIA_IRQHandler, /* 4: MCIa */
+ MCIB_IRQHandler, /* 5: MCIb */
+ UART0_IRQHandler, /* 6: UART0 - DUT FPGA */
+ UART1_IRQHandler, /* 7: UART1 - DUT FPGA */
+ UART2_IRQHandler, /* 8: UART2 - DUT FPGA */
+ UART4_IRQHandler, /* 9: UART4 - not connected */
+ AACI_IRQHandler, /* 10: AACI / AC97 */
+ CLCD_IRQHandler, /* 11: CLCD Combined Interrupt */
+ ENET_IRQHandler, /* 12: Ethernet */
+ USBDC_IRQHandler, /* 13: USB Device */
+ USBHC_IRQHandler, /* 14: USB Host Controller */
+ CHLCD_IRQHandler, /* 15: Character LCD */
+ FLEXRAY_IRQHandler, /* 16: Flexray */
+ CAN_IRQHandler, /* 17: CAN */
+ LIN_IRQHandler, /* 18: LIN */
+ I2C_IRQHandler, /* 19: I2C ADC/DAC */
+ 0, /* 20: Reserved */
+ 0, /* 21: Reserved */
+ 0, /* 22: Reserved */
+ 0, /* 23: Reserved */
+ 0, /* 24: Reserved */
+ 0, /* 25: Reserved */
+ 0, /* 26: Reserved */
+ 0, /* 27: Reserved */
+ CPU_CLCD_IRQHandler, /* 28: Reserved - CPU FPGA CLCD */
+ 0, /* 29: Reserved - CPU FPGA */
+ UART3_IRQHandler, /* 30: UART3 - CPU FPGA */
+ SPI_IRQHandler /* 31: SPI Touchscreen - CPU FPGA */
+};
+
+
+/*----------------------------------------------------------------------------
+ Reset Handler called on controller reset
+ *----------------------------------------------------------------------------*/
+void Reset_Handler(void) {
+ uint32_t *pSrc, *pDest;
+ uint32_t *pTable __attribute__((unused));
+
+/* Firstly it copies data from read only memory to RAM. There are two schemes
+ * to copy. One can copy more than one sections. Another can only copy
+ * one section. The former scheme needs more instructions and read-only
+ * data to implement than the latter.
+ * Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */
+
+#ifdef __STARTUP_COPY_MULTIPLE
+/* Multiple sections scheme.
+ *
+ * Between symbol address __copy_table_start__ and __copy_table_end__,
+ * there are array of triplets, each of which specify:
+ * offset 0: LMA of start of a section to copy from
+ * offset 4: VMA of start of a section to copy to
+ * offset 8: size of the section to copy. Must be multiply of 4
+ *
+ * All addresses must be aligned to 4 bytes boundary.
+ */
+ pTable = &__copy_table_start__;
+
+ for (; pTable < &__copy_table_end__; pTable = pTable + 3) {
+ pSrc = (uint32_t*)*(pTable + 0);
+ pDest = (uint32_t*)*(pTable + 1);
+ for (; pDest < (uint32_t*)(*(pTable + 1) + *(pTable + 2)) ; ) {
+ *pDest++ = *pSrc++;
+ }
+ }
+#else
+/* Single section scheme.
+ *
+ * The ranges of copy from/to are specified by following symbols
+ * __etext: LMA of start of the section to copy from. Usually end of text
+ * __data_start__: VMA of start of the section to copy to
+ * __data_end__: VMA of end of the section to copy to
+ *
+ * All addresses must be aligned to 4 bytes boundary.
+ */
+ pSrc = &__etext;
+ pDest = &__data_start__;
+
+ for ( ; pDest < &__data_end__ ; ) {
+ *pDest++ = *pSrc++;
+ }
+#endif /*__STARTUP_COPY_MULTIPLE */
+
+/* This part of work usually is done in C library startup code. Otherwise,
+ * define this macro to enable it in this startup.
+ *
+ * There are two schemes too. One can clear multiple BSS sections. Another
+ * can only clear one section. The former is more size expensive than the
+ * latter.
+ *
+ * Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
+ * Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
+ */
+#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
+/* Multiple sections scheme.
+ *
+ * Between symbol address __copy_table_start__ and __copy_table_end__,
+ * there are array of tuples specifying:
+ * offset 0: Start of a BSS section
+ * offset 4: Size of this BSS section. Must be multiply of 4
+ */
+ pTable = &__zero_table_start__;
+
+ for (; pTable < &__zero_table_end__; pTable = pTable + 2) {
+ pDest = (uint32_t*)*(pTable + 0);
+ for (; pDest < (uint32_t*)(*(pTable + 0) + *(pTable + 1)) ; ) {
+ *pDest++ = 0;
+ }
+ }
+#elif defined (__STARTUP_CLEAR_BSS)
+/* Single BSS section scheme.
+ *
+ * The BSS section is specified by following symbols
+ * __bss_start__: start of the BSS section.
+ * __bss_end__: end of the BSS section.
+ *
+ * Both addresses must be aligned to 4 bytes boundary.
+ */
+ pDest = &__bss_start__;
+
+ for ( ; pDest < &__bss_end__ ; ) {
+ *pDest++ = 0UL;
+ }
+#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
+
+#ifndef __NO_SYSTEM_INIT
+ SystemInit();
+#endif
+
+#ifndef __START
+#define __START _start
+#endif
+ __START();
+
+}
+
+
+/*----------------------------------------------------------------------------
+ Default Handler for Exceptions / Interrupts
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void) {
+
+ while(1);
+}
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.s new file mode 100644 index 0000000..7057eca --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.s @@ -0,0 +1,262 @@ +;/**************************************************************************//**
+; * @file startup_ARMCM7.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM7 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000C00
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/system_ARMCM7.c new file mode 100644 index 0000000..d74ac27 --- /dev/null +++ b/Drivers/CMSIS/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/system_ARMCM7.c @@ -0,0 +1,85 @@ +/**************************************************************************//**
+ * @file system_ARMCM7.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM7 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+ #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+ #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+ #include "ARMCM7_DP.h"
+#else
+ #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
+ (3U << 11*2) ); /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+ SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
|