diff options
Diffstat (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac.c')
| -rw-r--r-- | Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac.c | 1549 |
1 files changed, 1549 insertions, 0 deletions
diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac.c new file mode 100644 index 0000000..5d46e70 --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac.c @@ -0,0 +1,1549 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_dac.c
+ * @author MCD Application Team
+ * @brief DAC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Digital to Analog Converter (DAC) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ==============================================================================
+ ##### DAC Peripheral features #####
+ ==============================================================================
+ [..]
+ *** DAC Channels ***
+ ====================
+ [..]
+ STM32H7 devices integrate two 12-bit Digital Analog Converters
+
+ The 2 converters (i.e. channel1 & channel2)
+ can be used independently or simultaneously (dual mode):
+ (#) DAC channel1 with DAC_OUT1 (PA4) as output or connected to on-chip
+ peripherals (ex. OPAMPs, comparators).
+ (#) DAC channel2 with DAC_OUT2 (PA5) as output or connected to on-chip
+ peripherals (ex. OPAMPs, comparators).
+
+ *** DAC Triggers ***
+ ====================
+ [..]
+ Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
+ and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register.
+ [..]
+ Digital to Analog conversion can be triggered by:
+ (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9.
+ The used pin (GPIOx_PIN_9) must be configured in input mode.
+
+ (#) Timers TRGO: TIM1, TIM2, TIM4, TIM5, TIM6, TIM7, TIM8, TIM15, TIM23 and TIM24
+ (DAC_TRIGGER_T1_TRGO, DAC_TRIGGER_T2_TRGO...)
+
+ (#) Low Power Timers TRGO: LPTIM1, LPTIM2 and LPTIM3
+ (DAC_TRIGGER_LPTIM1_OUT, DAC_TRIGGER_LPTIM2_OUT)
+
+ (#) High Resolution Timer TRGO: HRTIM1
+ (DAC_TRIGGER_HR1_TRGO1, DAC_TRIGGER_HR1_TRGO2)
+
+ (#) Software using DAC_TRIGGER_SOFTWARE
+
+ *** DAC Buffer mode feature ***
+ ===============================
+ [..]
+ Each DAC channel integrates an output buffer that can be used to
+ reduce the output impedance, and to drive external loads directly
+ without having to add an external operational amplifier.
+ To enable, the output buffer use
+ sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+ [..]
+ (@) Refer to the device datasheet for more details about output
+ impedance value with and without output buffer.
+
+ *** GPIO configurations guidelines ***
+ =====================
+ [..]
+ When a DAC channel is used (ex channel1 on PA4) and the other is not
+ (ex channel2 on PA5 is configured in Analog and disabled).
+ Channel1 may disturb channel2 as coupling effect.
+ Note that there is no coupling on channel2 as soon as channel2 is turned on.
+ Coupling on adjacent channel could be avoided as follows:
+ when unused PA5 is configured as INPUT PULL-UP or DOWN.
+ PA5 is configured in ANALOG just before it is turned on.
+
+ *** DAC Sample and Hold feature ***
+ ========================
+ [..]
+ For each converter, 2 modes are supported: normal mode and
+ "sample and hold" mode (i.e. low power mode).
+ In the sample and hold mode, the DAC core converts data, then holds the
+ converted voltage on a capacitor. When not converting, the DAC cores and
+ buffer are completely turned off between samples and the DAC output is
+ tri-stated, therefore reducing the overall power consumption. A new
+ stabilization period is needed before each new conversion.
+
+ The sample and hold allow setting internal or external voltage @
+ low power consumption cost (output value can be at any given rate either
+ by CPU or DMA).
+
+ The Sample and hold block and registers uses either LSI & run in
+ several power modes: run mode, sleep mode, low power run, low power sleep
+ mode & stop1 mode.
+
+ Low power stop1 mode allows only static conversion.
+
+ To enable Sample and Hold mode
+ Enable LSI using HAL_RCC_OscConfig with RCC_OSCILLATORTYPE_LSI &
+ RCC_LSI_ON parameters.
+
+ Use DAC_InitStructure.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_ENABLE;
+ & DAC_ChannelConfTypeDef.DAC_SampleAndHoldConfig.DAC_SampleTime,
+ DAC_HoldTime & DAC_RefreshTime;
+
+ *** DAC calibration feature ***
+ ===================================
+ [..]
+ (#) The 2 converters (channel1 & channel2) provide calibration capabilities.
+ (++) Calibration aims at correcting some offset of output buffer.
+ (++) The DAC uses either factory calibration settings OR user defined
+ calibration (trimming) settings (i.e. trimming mode).
+ (++) The user defined settings can be figured out using self calibration
+ handled by HAL_DACEx_SelfCalibrate.
+ (++) HAL_DACEx_SelfCalibrate:
+ (+++) Runs automatically the calibration.
+ (+++) Enables the user trimming mode
+ (+++) Updates a structure with trimming values with fresh calibration
+ results.
+ The user may store the calibration results for larger
+ (ex monitoring the trimming as a function of temperature
+ for instance)
+
+ *** DAC wave generation feature ***
+ ===================================
+ [..]
+ Both DAC channels can be used to generate
+ (#) Noise wave
+ (#) Triangle wave
+
+ *** DAC data format ***
+ =======================
+ [..]
+ The DAC data format can be:
+ (#) 8-bit right alignment using DAC_ALIGN_8B_R
+ (#) 12-bit left alignment using DAC_ALIGN_12B_L
+ (#) 12-bit right alignment using DAC_ALIGN_12B_R
+
+ *** DAC data value to voltage correspondence ***
+ ================================================
+ [..]
+ The analog output voltage on each DAC channel pin is determined
+ by the following equation:
+ [..]
+ DAC_OUTx = VREF+ * DOR / 4095
+ (+) with DOR is the Data Output Register
+ [..]
+ VREF+ is the input voltage reference (refer to the device datasheet)
+ [..]
+ e.g. To set DAC_OUT1 to 0.7V, use
+ (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
+
+ *** DMA requests ***
+ =====================
+ [..]
+ A DMA request can be generated when an external trigger (but not a software trigger)
+ occurs if DMA requests are enabled using HAL_DAC_Start_DMA().
+ DMA requests are mapped as following:
+ (#) DAC channel1: mapped on DMA_REQUEST_DAC1_CH1
+ (#) DAC channel2: mapped on DMA_REQUEST_DAC1_CH2
+
+ [..]
+ (@) For Dual mode and specific signal (Triangle and noise) generation please
+ refer to Extended Features Driver description
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) DAC APB clock must be enabled to get write access to DAC
+ registers using HAL_DAC_Init()
+ (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
+ (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
+ (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions.
+
+ *** Calibration mode IO operation ***
+ ======================================
+ [..]
+ (+) Retrieve the factory trimming (calibration settings) using HAL_DACEx_GetTrimOffset()
+ (+) Run the calibration using HAL_DACEx_SelfCalibrate()
+ (+) Update the trimming while DAC running using HAL_DACEx_SetUserTrimming()
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the DAC peripheral using HAL_DAC_Start()
+ (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
+ (+) Stop the DAC peripheral using HAL_DAC_Stop()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
+ of data to be transferred at each end of conversion
+ First issued trigger will start the conversion of the value previously set by HAL_DAC_SetValue().
+ (+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
+ function is executed and user can add his own code by customization of function pointer
+ HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
+ (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
+ function is executed and user can add his own code by customization of function pointer
+ HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2()
+ (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
+ add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
+ (+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler.
+ HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2()
+ function is executed and user can add his own code by customization of function pointer
+ HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and
+ add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1()
+ (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
+
+ *** Callback registration ***
+ =============================================
+ [..]
+ The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ Use Functions HAL_DAC_RegisterCallback() to register a user callback,
+ it allows to register following callbacks:
+ (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1.
+ (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1.
+ (+) ErrorCallbackCh1 : callback when an error occurs on Ch1.
+ (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1.
+ (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2.
+ (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2.
+ (+) ErrorCallbackCh2 : callback when an error occurs on Ch2.
+ (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2.
+ (+) MspInitCallback : DAC MspInit.
+ (+) MspDeInitCallback : DAC MspdeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ Use function HAL_DAC_UnRegisterCallback() to reset a callback to the default
+ weak (surcharged) function. It allows to reset following callbacks:
+ (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1.
+ (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1.
+ (+) ErrorCallbackCh1 : callback when an error occurs on Ch1.
+ (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1.
+ (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2.
+ (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2.
+ (+) ErrorCallbackCh2 : callback when an error occurs on Ch2.
+ (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2.
+ (+) MspInitCallback : DAC MspInit.
+ (+) MspDeInitCallback : DAC MspdeInit.
+ (+) All Callbacks
+ This function) takes as parameters the HAL peripheral handle and the Callback ID.
+
+ By default, after the HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET
+ all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+ Exception done for MspInit and MspDeInit callbacks that are respectively
+ reset to the legacy weak (surcharged) functions in the HAL_DAC_Init
+ and HAL_DAC_DeInit only when these callbacks are null (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, the HAL_DAC_Init and HAL_DAC_DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in READY state only.
+ Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
+ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
+ during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using HAL_DAC_RegisterCallback before calling HAL_DAC_DeInit
+ or HAL_DAC_Init function.
+
+ When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ *** DAC HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DAC HAL driver.
+
+ (+) __HAL_DAC_ENABLE : Enable the DAC peripheral
+ (+) __HAL_DAC_DISABLE : Disable the DAC peripheral
+ (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
+ (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
+
+ [..]
+ (@) You can refer to the DAC HAL driver header file for more useful macros
+
+@endverbatim
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#if defined(DAC1) || defined(DAC2)
+
+/** @defgroup DAC DAC
+ * @brief DAC driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup DAC_Private_Constants DAC Private Constants
+ * @{
+ */
+#define TIMEOUT_DAC_CALIBCONFIG 1U /* 1 ms */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions -------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Functions DAC Exported Functions
+ * @{
+ */
+
+/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DAC.
+ (+) De-initialize the DAC.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DAC peripheral according to the specified parameters
+ * in the DAC_InitStruct and initialize the associated handle.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac)
+{
+ /* Check DAC handle */
+ if (hdac == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Check the parameters */
+ assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+ if (hdac->State == HAL_DAC_STATE_RESET)
+ {
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ /* Init the DAC Callback settings */
+ hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1;
+ hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1;
+ hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1;
+ hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1;
+
+ hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2;
+ hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2;
+ hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2;
+ hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2;
+
+ if (hdac->MspInitCallback == NULL)
+ {
+ hdac->MspInitCallback = HAL_DAC_MspInit;
+ }
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+ /* Allocate lock resource and initialize it */
+ hdac->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ /* Init the low level hardware */
+ hdac->MspInitCallback(hdac);
+#else
+ /* Init the low level hardware */
+ HAL_DAC_MspInit(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+ }
+
+ /* Initialize the DAC state*/
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Set DAC error code to none */
+ hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+ /* Initialize the DAC state*/
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitialize the DAC peripheral registers to their default reset values.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac)
+{
+ /* Check DAC handle */
+ if (hdac == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ if (hdac->MspDeInitCallback == NULL)
+ {
+ hdac->MspDeInitCallback = HAL_DAC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ hdac->MspDeInitCallback(hdac);
+#else
+ /* DeInit the low level hardware */
+ HAL_DAC_MspDeInit(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+ /* Set DAC error code to none */
+ hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the DAC MSP.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DAC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the DAC MSP.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DAC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion.
+ (+) Stop conversion.
+ (+) Start conversion and enable DMA transfer.
+ (+) Stop conversion and disable DMA transfer.
+ (+) Get result of conversion.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ if (Channel == DAC_CHANNEL_1)
+ {
+ /* Check if software trigger enabled */
+ if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE)
+ {
+ /* Enable the selected DAC software conversion */
+ SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1);
+ }
+ }
+
+ else
+ {
+ /* Check if software trigger enabled */
+ if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << (Channel & 0x10UL)))
+ {
+ /* Enable the selected DAC software conversion*/
+ SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2);
+ }
+ }
+
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Disable the Peripheral */
+ __HAL_DAC_DISABLE(hdac, Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length,
+ uint32_t Alignment)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ if (Channel == DAC_CHANNEL_1)
+ {
+ /* Set the DMA transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+ /* Set the DMA half transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+ /* Set the DMA error callback for channel1 */
+ hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+ /* Enable the selected DAC channel1 DMA request */
+ SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1);
+
+ /* Case of use of channel 1 */
+ switch (Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+ break;
+ default:
+ break;
+ }
+ }
+
+ else
+ {
+ /* Set the DMA transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
+
+ /* Set the DMA half transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
+
+ /* Set the DMA error callback for channel2 */
+ hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
+
+ /* Enable the selected DAC channel2 DMA request */
+ SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2);
+
+ /* Case of use of channel 2 */
+ switch (Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
+ break;
+ default:
+ break;
+ }
+ }
+
+
+ /* Enable the DMA Stream */
+ if (Channel == DAC_CHANNEL_1)
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA Stream */
+ status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+ }
+
+ else
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
+
+ /* Enable the DMA Stream */
+ status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
+ }
+
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdac);
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Peripheral */
+ __HAL_DAC_ENABLE(hdac, Channel);
+ }
+ else
+ {
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Disable the selected DAC channel DMA request */
+ hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << (Channel & 0x10UL));
+
+ /* Disable the Peripheral */
+ __HAL_DAC_DISABLE(hdac, Channel);
+
+ /* Disable the DMA Stream */
+
+ /* Channel1 is used */
+ if (Channel == DAC_CHANNEL_1)
+ {
+ /* Disable the DMA Stream */
+ (void)HAL_DMA_Abort(hdac->DMA_Handle1);
+
+ /* Disable the DAC DMA underrun interrupt */
+ __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1);
+ }
+
+ else /* Channel2 is used for */
+ {
+ /* Disable the DMA Stream */
+ (void)HAL_DMA_Abort(hdac->DMA_Handle2);
+
+ /* Disable the DAC DMA underrun interrupt */
+ __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2);
+ }
+
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles DAC interrupt request
+ * This function uses the interruption of DMA
+ * underrun.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac)
+{
+ if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1))
+ {
+ /* Check underrun flag of DAC channel 1 */
+ if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel1 DMA underrun error */
+ SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1);
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR1);
+
+ /* Disable the selected DAC channel1 DMA request */
+ CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN1);
+
+ /* Error callback */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ hdac->DMAUnderrunCallbackCh1(hdac);
+#else
+ HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+ }
+ }
+
+
+ if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2))
+ {
+ /* Check underrun flag of DAC channel 2 */
+ if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel2 DMA underrun error */
+ SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH2);
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR2);
+
+ /* Disable the selected DAC channel2 DMA request */
+ CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN2);
+
+ /* Error callback */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ hdac->DMAUnderrunCallbackCh2(hdac);
+#else
+ HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+ }
+ }
+
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param Alignment Specifies the data alignment.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @param Data Data to be loaded in the selected data holding register.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
+{
+ __IO uint32_t tmp = 0UL;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)hdac->Instance;
+ if (Channel == DAC_CHANNEL_1)
+ {
+ tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
+ }
+
+ else
+ {
+ tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
+ }
+
+
+ /* Set the DAC channel selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Conversion complete callback in non-blocking mode for Channel1
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Conversion half DMA transfer callback in non-blocking mode for Channel1
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error DAC callback for Channel1.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA underrun DAC callback for channel1.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure channels.
+ (+) Set the specified data holding register value for DAC channel.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel)
+{
+ uint32_t result;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ if (Channel == DAC_CHANNEL_1)
+ {
+ result = hdac->Instance->DOR1;
+ }
+
+ else
+ {
+ result = hdac->Instance->DOR2;
+ }
+
+ /* Returns the DAC channel data output register value */
+ return result;
+}
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig DAC configuration structure.
+ * @param Channel The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel)
+{
+ uint32_t tmpreg1;
+ uint32_t tmpreg2;
+ uint32_t tickstart;
+ uint32_t connectOnChip;
+
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+ assert_param(IS_DAC_CHIP_CONNECTION(sConfig->DAC_ConnectOnChipPeripheral));
+ assert_param(IS_DAC_TRIMMING(sConfig->DAC_UserTrimming));
+ if ((sConfig->DAC_UserTrimming) == DAC_TRIMMING_USER)
+ {
+ assert_param(IS_DAC_TRIMMINGVALUE(sConfig->DAC_TrimmingValue));
+ }
+ assert_param(IS_DAC_SAMPLEANDHOLD(sConfig->DAC_SampleAndHold));
+ if ((sConfig->DAC_SampleAndHold) == DAC_SAMPLEANDHOLD_ENABLE)
+ {
+ assert_param(IS_DAC_SAMPLETIME(sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime));
+ assert_param(IS_DAC_HOLDTIME(sConfig->DAC_SampleAndHoldConfig.DAC_HoldTime));
+ assert_param(IS_DAC_REFRESHTIME(sConfig->DAC_SampleAndHoldConfig.DAC_RefreshTime));
+ }
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Sample and hold configuration */
+ if (sConfig->DAC_SampleAndHold == DAC_SAMPLEANDHOLD_ENABLE)
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ if (Channel == DAC_CHANNEL_1)
+ {
+ /* SHSR1 can be written when BWST1 is cleared */
+ while (((hdac->Instance->SR) & DAC_SR_BWST1) != 0UL)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > TIMEOUT_DAC_CALIBCONFIG)
+ {
+ /* New check to avoid false timeout detection in case of preemption */
+ if(((hdac->Instance->SR) & DAC_SR_BWST1) != 0UL)
+ {
+ /* Update error code */
+ SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_TIMEOUT);
+
+ /* Change the DMA state */
+ hdac->State = HAL_DAC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ HAL_Delay(1);
+ hdac->Instance->SHSR1 = sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime;
+ }
+
+ else /* Channel 2 */
+ {
+ /* SHSR2 can be written when BWST2 is cleared */
+ while (((hdac->Instance->SR) & DAC_SR_BWST2) != 0UL)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > TIMEOUT_DAC_CALIBCONFIG)
+ {
+ /* New check to avoid false timeout detection in case of preemption */
+ if(((hdac->Instance->SR) & DAC_SR_BWST2) != 0UL)
+ {
+ /* Update error code */
+ SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_TIMEOUT);
+
+ /* Change the DMA state */
+ hdac->State = HAL_DAC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ HAL_Delay(1U);
+ hdac->Instance->SHSR2 = sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime;
+ }
+
+
+ /* HoldTime */
+ MODIFY_REG(hdac->Instance->SHHR, DAC_SHHR_THOLD1 << (Channel & 0x10UL),
+ (sConfig->DAC_SampleAndHoldConfig.DAC_HoldTime) << (Channel & 0x10UL));
+ /* RefreshTime */
+ MODIFY_REG(hdac->Instance->SHRR, DAC_SHRR_TREFRESH1 << (Channel & 0x10UL),
+ (sConfig->DAC_SampleAndHoldConfig.DAC_RefreshTime) << (Channel & 0x10UL));
+ }
+
+ if (sConfig->DAC_UserTrimming == DAC_TRIMMING_USER)
+ /* USER TRIMMING */
+ {
+ /* Get the DAC CCR value */
+ tmpreg1 = hdac->Instance->CCR;
+ /* Clear trimming value */
+ tmpreg1 &= ~(((uint32_t)(DAC_CCR_OTRIM1)) << (Channel & 0x10UL));
+ /* Configure for the selected trimming offset */
+ tmpreg2 = sConfig->DAC_TrimmingValue;
+ /* Calculate CCR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << (Channel & 0x10UL);
+ /* Write to DAC CCR */
+ hdac->Instance->CCR = tmpreg1;
+ }
+ /* else factory trimming is used (factory setting are available at reset)*/
+ /* SW Nothing has nothing to do */
+
+ /* Get the DAC MCR value */
+ tmpreg1 = hdac->Instance->MCR;
+ /* Clear DAC_MCR_MODEx bits */
+ tmpreg1 &= ~(((uint32_t)(DAC_MCR_MODE1)) << (Channel & 0x10UL));
+ /* Configure for the selected DAC channel: mode, buffer output & on chip peripheral connect */
+ if (sConfig->DAC_ConnectOnChipPeripheral == DAC_CHIPCONNECT_EXTERNAL)
+ {
+ connectOnChip = 0x00000000UL;
+ }
+ else if (sConfig->DAC_ConnectOnChipPeripheral == DAC_CHIPCONNECT_INTERNAL)
+ {
+ connectOnChip = DAC_MCR_MODE1_0;
+ }
+ else /* (sConfig->DAC_ConnectOnChipPeripheral == DAC_CHIPCONNECT_BOTH) */
+ {
+ if (sConfig->DAC_OutputBuffer == DAC_OUTPUTBUFFER_ENABLE)
+ {
+ connectOnChip = DAC_MCR_MODE1_0;
+ }
+ else
+ {
+ connectOnChip = 0x00000000UL;
+ }
+ }
+ tmpreg2 = (sConfig->DAC_SampleAndHold | sConfig->DAC_OutputBuffer | connectOnChip);
+ /* Calculate MCR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << (Channel & 0x10UL);
+ /* Write to DAC MCR */
+ hdac->Instance->MCR = tmpreg1;
+
+ /* DAC in normal operating mode hence clear DAC_CR_CENx bit */
+ CLEAR_BIT(hdac->Instance->CR, DAC_CR_CEN1 << (Channel & 0x10UL));
+
+ /* Get the DAC CR value */
+ tmpreg1 = hdac->Instance->CR;
+ /* Clear TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1)) << (Channel & 0x10UL));
+ /* Configure for the selected DAC channel: trigger */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ tmpreg2 = sConfig->DAC_Trigger;
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << (Channel & 0x10UL);
+ /* Write to DAC CR */
+ hdac->Instance->CR = tmpreg1;
+ /* Disable wave generation */
+ CLEAR_BIT(hdac->Instance->CR, (DAC_CR_WAVE1 << (Channel & 0x10UL)));
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DAC state.
+ (+) Check the DAC Errors.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the DAC handle state
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL state
+ */
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac)
+{
+ /* Return DAC handle state */
+ return hdac->State;
+}
+
+
+/**
+ * @brief Return the DAC error code
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval DAC Error Code
+ */
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
+{
+ return hdac->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+ * @{
+ */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User DAC Callback
+ * To be used instead of the weak (surcharged) predefined callback
+ * @param hdac DAC handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_DAC_ERROR_INVALID_CALLBACK DAC Error Callback ID
+ * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Complete Callback ID
+ * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID
+ * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID
+ * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID
+ * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID
+ * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID
+ * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID
+ * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID
+ * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID
+ * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID
+ *
+ * @param pCallback pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID,
+ pDAC_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ if (hdac->State == HAL_DAC_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DAC_CH1_COMPLETE_CB_ID :
+ hdac->ConvCpltCallbackCh1 = pCallback;
+ break;
+ case HAL_DAC_CH1_HALF_COMPLETE_CB_ID :
+ hdac->ConvHalfCpltCallbackCh1 = pCallback;
+ break;
+ case HAL_DAC_CH1_ERROR_ID :
+ hdac->ErrorCallbackCh1 = pCallback;
+ break;
+ case HAL_DAC_CH1_UNDERRUN_CB_ID :
+ hdac->DMAUnderrunCallbackCh1 = pCallback;
+ break;
+
+ case HAL_DAC_CH2_COMPLETE_CB_ID :
+ hdac->ConvCpltCallbackCh2 = pCallback;
+ break;
+ case HAL_DAC_CH2_HALF_COMPLETE_CB_ID :
+ hdac->ConvHalfCpltCallbackCh2 = pCallback;
+ break;
+ case HAL_DAC_CH2_ERROR_ID :
+ hdac->ErrorCallbackCh2 = pCallback;
+ break;
+ case HAL_DAC_CH2_UNDERRUN_CB_ID :
+ hdac->DMAUnderrunCallbackCh2 = pCallback;
+ break;
+
+ case HAL_DAC_MSPINIT_CB_ID :
+ hdac->MspInitCallback = pCallback;
+ break;
+ case HAL_DAC_MSPDEINIT_CB_ID :
+ hdac->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hdac->State == HAL_DAC_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DAC_MSPINIT_CB_ID :
+ hdac->MspInitCallback = pCallback;
+ break;
+ case HAL_DAC_MSPDEINIT_CB_ID :
+ hdac->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdac);
+ return status;
+}
+
+/**
+ * @brief Unregister a User DAC Callback
+ * DAC Callback is redirected to the weak (surcharged) predefined callback
+ * @param hdac DAC handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 transfer Complete Callback ID
+ * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID
+ * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID
+ * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID
+ * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID
+ * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID
+ * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID
+ * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID
+ * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID
+ * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID
+ * @arg @ref HAL_DAC_ALL_CB_ID DAC All callbacks
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ if (hdac->State == HAL_DAC_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DAC_CH1_COMPLETE_CB_ID :
+ hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1;
+ break;
+ case HAL_DAC_CH1_HALF_COMPLETE_CB_ID :
+ hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1;
+ break;
+ case HAL_DAC_CH1_ERROR_ID :
+ hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1;
+ break;
+ case HAL_DAC_CH1_UNDERRUN_CB_ID :
+ hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1;
+ break;
+
+ case HAL_DAC_CH2_COMPLETE_CB_ID :
+ hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2;
+ break;
+ case HAL_DAC_CH2_HALF_COMPLETE_CB_ID :
+ hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2;
+ break;
+ case HAL_DAC_CH2_ERROR_ID :
+ hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2;
+ break;
+ case HAL_DAC_CH2_UNDERRUN_CB_ID :
+ hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2;
+ break;
+
+ case HAL_DAC_MSPINIT_CB_ID :
+ hdac->MspInitCallback = HAL_DAC_MspInit;
+ break;
+ case HAL_DAC_MSPDEINIT_CB_ID :
+ hdac->MspDeInitCallback = HAL_DAC_MspDeInit;
+ break;
+ case HAL_DAC_ALL_CB_ID :
+ hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1;
+ hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1;
+ hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1;
+ hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1;
+
+ hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2;
+ hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2;
+ hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2;
+ hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2;
+
+ hdac->MspInitCallback = HAL_DAC_MspInit;
+ hdac->MspDeInitCallback = HAL_DAC_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hdac->State == HAL_DAC_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DAC_MSPINIT_CB_ID :
+ hdac->MspInitCallback = HAL_DAC_MspInit;
+ break;
+ case HAL_DAC_MSPDEINIT_CB_ID :
+ hdac->MspDeInitCallback = HAL_DAC_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdac);
+ return status;
+}
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ hdac->ConvCpltCallbackCh1(hdac);
+#else
+ HAL_DAC_ConvCpltCallbackCh1(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+ hdac->State = HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+ /* Conversion complete callback */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ hdac->ConvHalfCpltCallbackCh1(hdac);
+#else
+ HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ hdac->ErrorCallbackCh1(hdac);
+#else
+ HAL_DAC_ErrorCallbackCh1(hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+ hdac->State = HAL_DAC_STATE_READY;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DAC1 || DAC2 */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
|