diff options
Diffstat (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c')
| -rw-r--r-- | Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c | 3165 |
1 files changed, 3165 insertions, 0 deletions
diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c new file mode 100644 index 0000000..13a6b29 --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c @@ -0,0 +1,3165 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_ospi.c
+ * @author MCD Application Team
+ * @brief OSPI HAL module driver.
+ This file provides firmware functions to manage the following
+ functionalities of the OctoSPI interface (OSPI).
+ + Initialization and de-initialization functions
+ + Hyperbus configuration
+ + Indirect functional mode management
+ + Memory-mapped functional mode management
+ + Auto-polling functional mode management
+ + Interrupts and flags management
+ + DMA channel configuration for indirect functional mode
+ + Errors management and abort functionality
+ + IO manager configuration
+
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ *** Initialization ***
+ ======================
+ [..]
+ As prerequisite, fill in the HAL_OSPI_MspInit() :
+ (+) Enable OctoSPI and OctoSPIM clocks interface with __HAL_RCC_OSPIx_CLK_ENABLE().
+ (+) Reset OctoSPI Peripheral with __HAL_RCC_OSPIx_FORCE_RESET() and __HAL_RCC_OSPIx_RELEASE_RESET().
+ (+) Enable the clocks for the OctoSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+ (+) Configure these OctoSPI pins in alternate mode using HAL_GPIO_Init().
+ (+) If interrupt or DMA mode is used, enable and configure OctoSPI global
+ interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ (+) If DMA mode is used, enable the clocks for the OctoSPI DMA channel
+ with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(),
+ link it with OctoSPI handle using __HAL_LINKDMA(), enable and configure
+ DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ [..]
+ Configure the fifo threshold, the dual-quad mode, the memory type, the
+ device size, the CS high time, the free running clock, the clock mode,
+ the wrap size, the clock prescaler, the sample shifting, the hold delay
+ and the CS boundary using the HAL_OSPI_Init() function.
+ [..]
+ When using Hyperbus, configure the RW recovery time, the access time,
+ the write latency and the latency mode unsing the HAL_OSPI_HyperbusCfg()
+ function.
+
+ *** Indirect functional mode ***
+ ================================
+ [..]
+ In regular mode, configure the command sequence using the HAL_OSPI_Command()
+ or HAL_OSPI_Command_IT() functions :
+ (+) Instruction phase : the mode used and if present the size, the instruction
+ opcode and the DTR mode.
+ (+) Address phase : the mode used and if present the size, the address
+ value and the DTR mode.
+ (+) Alternate-bytes phase : the mode used and if present the size, the
+ alternate bytes values and the DTR mode.
+ (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (+) Data phase : the mode used and if present the number of bytes and the DTR mode.
+ (+) Data strobe (DQS) mode : the activation (or not) of this mode
+ (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (+) Flash identifier : in dual-quad mode, indicates which flash is concerned
+ (+) Operation type : always common configuration
+ [..]
+ In Hyperbus mode, configure the command sequence using the HAL_OSPI_HyperbusCmd()
+ function :
+ (+) Address space : indicate if the access will be done in register or memory
+ (+) Address size
+ (+) Number of data
+ (+) Data strobe (DQS) mode : the activation (or not) of this mode
+ [..]
+ If no data is required for the command (only for regular mode, not for
+ Hyperbus mode), it is sent directly to the memory :
+ (+) In polling mode, the output of the function is done when the transfer is complete.
+ (+) In interrupt mode, HAL_OSPI_CmdCpltCallback() will be called when the transfer is complete.
+ [..]
+ For the indirect write mode, use HAL_OSPI_Transmit(), HAL_OSPI_Transmit_DMA() or
+ HAL_OSPI_Transmit_IT() after the command configuration :
+ (+) In polling mode, the output of the function is done when the transfer is complete.
+ (+) In interrupt mode, HAL_OSPI_FifoThresholdCallback() will be called when the fifo threshold
+ is reached and HAL_OSPI_TxCpltCallback() will be called when the transfer is complete.
+ (+) In DMA mode, HAL_OSPI_TxHalfCpltCallback() will be called at the half transfer and
+ HAL_OSPI_TxCpltCallback() will be called when the transfer is complete.
+ [..]
+ For the indirect read mode, use HAL_OSPI_Receive(), HAL_OSPI_Receive_DMA() or
+ HAL_OSPI_Receive_IT() after the command configuration :
+ (+) In polling mode, the output of the function is done when the transfer is complete.
+ (+) In interrupt mode, HAL_OSPI_FifoThresholdCallback() will be called when the fifo threshold
+ is reached and HAL_OSPI_RxCpltCallback() will be called when the transfer is complete.
+ (+) In DMA mode, HAL_OSPI_RxHalfCpltCallback() will be called at the half transfer and
+ HAL_OSPI_RxCpltCallback() will be called when the transfer is complete.
+
+ *** Auto-polling functional mode ***
+ ====================================
+ [..]
+ Configure the command sequence by the same way than the indirect mode
+ [..]
+ Configure the auto-polling functional mode using the HAL_OSPI_AutoPolling()
+ or HAL_OSPI_AutoPolling_IT() functions :
+ (+) The size of the status bytes, the match value, the mask used, the match mode (OR/AND),
+ the polling interval and the automatic stop activation.
+ [..]
+ After the configuration :
+ (+) In polling mode, the output of the function is done when the status match is reached. The
+ automatic stop is activated to avoid an infinite loop.
+ (+) In interrupt mode, HAL_OSPI_StatusMatchCallback() will be called each time the status match is reached.
+
+ *** MDMA functional mode ***
+ ====================================
+ [..]
+ Configure the SourceInc and DestinationInc of MDMA parameters in the HAL_OSPI_MspInit() function :
+ (+) MDMA settings for write operation :
+ (++) The DestinationInc should be MDMA_DEST_INC_DISABLE
+ (++) The SourceInc must be a value of @ref MDMA_Source_increment_mode (Except the MDMA_SRC_INC_DOUBLEWORD).
+ (++) The SourceDataSize must be a value of @ref MDMA Source data size (Except the MDMA_SRC_DATASIZE_DOUBLEWORD)
+ aligned with @ref MDMA_Source_increment_mode .
+ (++) The DestDataSize must be a value of @ref MDMA Destination data size (Except the MDMA_DEST_DATASIZE_DOUBLEWORD)
+ (+) MDMA settings for read operation :
+ (++) The SourceInc should be MDMA_SRC_INC_DISABLE
+ (++) The DestinationInc must be a value of @ref MDMA_Destination_increment_mode (Except the MDMA_DEST_INC_DOUBLEWORD).
+ (++) The SourceDataSize must be a value of @ref MDMA Source data size (Except the MDMA_SRC_DATASIZE_DOUBLEWORD) .
+ (++) The DestDataSize must be a value of @ref MDMA Destination data size (Except the MDMA_DEST_DATASIZE_DOUBLEWORD)
+ aligned with @ref MDMA_Destination_increment_mode.
+ (+) The buffer Transfer Length (BufferTransferLength) = number of bytes in the FIFO (FifoThreshold) of the Octospi.
+ [..]
+ In case of wrong MDMA setting
+ (+) For write operation :
+ (++) If the DestinationInc is different to MDMA_DEST_INC_DISABLE , it will be disabled by the HAL_OSPI_Transmit_DMA().
+ (+) For read operation :
+ (++) If the SourceInc is not set to MDMA_SRC_INC_DISABLE , it will be disabled by the HAL_OSPI_Receive_DMA().
+
+ *** Memory-mapped functional mode ***
+ =====================================
+ [..]
+ Configure the command sequence by the same way than the indirect mode except
+ for the operation type in regular mode :
+ (+) Operation type equals to read configuration : the command configuration
+ applies to read access in memory-mapped mode
+ (+) Operation type equals to write configuration : the command configuration
+ applies to write access in memory-mapped mode
+ (+) Both read and write configuration should be performed before activating
+ memory-mapped mode
+ [..]
+ Configure the memory-mapped functional mode using the HAL_OSPI_MemoryMapped()
+ functions :
+ (+) The timeout activation and the timeout period.
+ [..]
+ After the configuration, the OctoSPI will be used as soon as an access on the AHB is done on
+ the address range. HAL_OSPI_TimeOutCallback() will be called when the timeout expires.
+
+ *** Errors management and abort functionality ***
+ =================================================
+ [..]
+ HAL_OSPI_GetError() function gives the error raised during the last operation.
+ [..]
+ HAL_OSPI_Abort() and HAL_OSPI_AbortIT() functions aborts any on-going operation and
+ flushes the fifo :
+ (+) In polling mode, the output of the function is done when the transfer
+ complete bit is set and the busy bit cleared.
+ (+) In interrupt mode, HAL_OSPI_AbortCpltCallback() will be called when
+ the transfer complete bit is set.
+
+ *** Control functions ***
+ =========================
+ [..]
+ HAL_OSPI_GetState() function gives the current state of the HAL OctoSPI driver.
+ [..]
+ HAL_OSPI_SetTimeout() function configures the timeout value used in the driver.
+ [..]
+ HAL_OSPI_SetFifoThreshold() function configures the threshold on the Fifo of the OSPI Peripheral.
+ [..]
+ HAL_OSPI_GetFifoThreshold() function gives the current of the Fifo's threshold
+
+ *** IO manager configuration functions ***
+ ==========================================
+ [..]
+ HAL_OSPIM_Config() function configures the IO manager for the OctoSPI instance.
+
+ *** Callback registration ***
+ =============================================
+ [..]
+ The compilation define USE_HAL_OSPI_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ [..]
+ Use function HAL_OSPI_RegisterCallback() to register a user callback,
+ it allows to register following callbacks:
+ (+) ErrorCallback : callback when error occurs.
+ (+) AbortCpltCallback : callback when abort is completed.
+ (+) FifoThresholdCallback : callback when the fifo threshold is reached.
+ (+) CmdCpltCallback : callback when a command without data is completed.
+ (+) RxCpltCallback : callback when a reception transfer is completed.
+ (+) TxCpltCallback : callback when a transmission transfer is completed.
+ (+) RxHalfCpltCallback : callback when half of the reception transfer is completed.
+ (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed.
+ (+) StatusMatchCallback : callback when a status match occurs.
+ (+) TimeOutCallback : callback when the timeout perioed expires.
+ (+) MspInitCallback : OSPI MspInit.
+ (+) MspDeInitCallback : OSPI MspDeInit.
+ [..]
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ [..]
+ Use function HAL_OSPI_UnRegisterCallback() to reset a callback to the default
+ weak (surcharged) function. It allows to reset following callbacks:
+ (+) ErrorCallback : callback when error occurs.
+ (+) AbortCpltCallback : callback when abort is completed.
+ (+) FifoThresholdCallback : callback when the fifo threshold is reached.
+ (+) CmdCpltCallback : callback when a command without data is completed.
+ (+) RxCpltCallback : callback when a reception transfer is completed.
+ (+) TxCpltCallback : callback when a transmission transfer is completed.
+ (+) RxHalfCpltCallback : callback when half of the reception transfer is completed.
+ (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed.
+ (+) StatusMatchCallback : callback when a status match occurs.
+ (+) TimeOutCallback : callback when the timeout perioed expires.
+ (+) MspInitCallback : OSPI MspInit.
+ (+) MspDeInitCallback : OSPI MspDeInit.
+ [..]
+ This function) takes as parameters the HAL peripheral handle and the Callback ID.
+
+ [..]
+ By default, after the HAL_OSPI_Init() and if the state is HAL_OSPI_STATE_RESET
+ all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+ Exception done for MspInit and MspDeInit callbacks that are respectively
+ reset to the legacy weak (surcharged) functions in the HAL_OSPI_Init()
+ and HAL_OSPI_DeInit() only when these callbacks are null (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, the HAL_OSPI_Init() and HAL_OSPI_DeInit()
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ [..]
+ Callbacks can be registered/unregistered in READY state only.
+ Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
+ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
+ during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using HAL_OSPI_RegisterCallback() before calling HAL_OSPI_DeInit()
+ or HAL_OSPI_Init() function.
+
+ [..]
+ When The compilation define USE_HAL_OSPI_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ @endverbatim
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+#if defined(OCTOSPI) || defined(OCTOSPI1) || defined(OCTOSPI2)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup OSPI OSPI
+ * @brief OSPI HAL module driver
+ * @{
+ */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+
+/**
+ @cond 0
+ */
+/* Private typedef -----------------------------------------------------------*/
+
+/* Private define ------------------------------------------------------------*/
+#define OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000) /*!< Indirect write mode */
+#define OSPI_FUNCTIONAL_MODE_INDIRECT_READ ((uint32_t)OCTOSPI_CR_FMODE_0) /*!< Indirect read mode */
+#define OSPI_FUNCTIONAL_MODE_AUTO_POLLING ((uint32_t)OCTOSPI_CR_FMODE_1) /*!< Automatic polling mode */
+#define OSPI_FUNCTIONAL_MODE_MEMORY_MAPPED ((uint32_t)OCTOSPI_CR_FMODE) /*!< Memory-mapped mode */
+
+#define OSPI_CFG_STATE_MASK 0x00000004U
+#define OSPI_BUSY_STATE_MASK 0x00000008U
+
+#define OSPI_NB_INSTANCE 2U
+#define OSPI_IOM_NB_PORTS 2U
+#define OSPI_IOM_PORT_MASK 0x1U
+
+/* Private macro -------------------------------------------------------------*/
+#define IS_OSPI_FUNCTIONAL_MODE(MODE) (((MODE) == OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \
+ ((MODE) == OSPI_FUNCTIONAL_MODE_INDIRECT_READ) || \
+ ((MODE) == OSPI_FUNCTIONAL_MODE_AUTO_POLLING) || \
+ ((MODE) == OSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+
+/* Private variables ---------------------------------------------------------*/
+
+/* Private function prototypes -----------------------------------------------*/
+static void OSPI_DMACplt (MDMA_HandleTypeDef *hmdma);
+static void OSPI_DMAError (MDMA_HandleTypeDef *hmdma);
+static void OSPI_DMAAbortCplt (MDMA_HandleTypeDef *hmdma);
+static HAL_StatusTypeDef OSPI_WaitFlagStateUntilTimeout(OSPI_HandleTypeDef *hospi, uint32_t Flag, FlagStatus State,
+ uint32_t Tickstart, uint32_t Timeout);
+static HAL_StatusTypeDef OSPI_ConfigCmd (OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd);
+static HAL_StatusTypeDef OSPIM_GetConfig (uint8_t instance_nb, OSPIM_CfgTypeDef *cfg);
+/**
+ @endcond
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup OSPI_Exported_Functions OSPI Exported Functions
+ * @{
+ */
+
+/** @defgroup OSPI_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Initialize the OctoSPI.
+ (+) De-initialize the OctoSPI.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the OSPI mode according to the specified parameters
+ * in the OSPI_InitTypeDef and initialize the associated handle.
+ * @param hospi : OSPI handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Init (OSPI_HandleTypeDef *hospi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the OSPI handle allocation */
+ if (hospi == NULL)
+ {
+ status = HAL_ERROR;
+ /* No error code can be set set as the handler is null */
+ }
+ else
+ {
+ /* Check the parameters of the initialization structure */
+ assert_param(IS_OSPI_FIFO_THRESHOLD (hospi->Init.FifoThreshold));
+ assert_param(IS_OSPI_DUALQUAD_MODE (hospi->Init.DualQuad));
+ assert_param(IS_OSPI_MEMORY_TYPE (hospi->Init.MemoryType));
+ assert_param(IS_OSPI_DEVICE_SIZE (hospi->Init.DeviceSize));
+ assert_param(IS_OSPI_CS_HIGH_TIME (hospi->Init.ChipSelectHighTime));
+ assert_param(IS_OSPI_FREE_RUN_CLK (hospi->Init.FreeRunningClock));
+ assert_param(IS_OSPI_CLOCK_MODE (hospi->Init.ClockMode));
+ assert_param(IS_OSPI_WRAP_SIZE (hospi->Init.WrapSize));
+ assert_param(IS_OSPI_CLK_PRESCALER (hospi->Init.ClockPrescaler));
+ assert_param(IS_OSPI_SAMPLE_SHIFTING(hospi->Init.SampleShifting));
+ assert_param(IS_OSPI_DHQC (hospi->Init.DelayHoldQuarterCycle));
+ assert_param(IS_OSPI_CS_BOUNDARY (hospi->Init.ChipSelectBoundary));
+ assert_param(IS_OSPI_DLYBYP (hospi->Init.DelayBlockBypass));
+ assert_param(IS_OSPI_MAXTRAN (hospi->Init.MaxTran));
+
+ /* Initialize error code */
+ hospi->ErrorCode = HAL_OSPI_ERROR_NONE;
+
+ /* Check if the state is the reset state */
+ if (hospi->State == HAL_OSPI_STATE_RESET)
+ {
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ /* Reset Callback pointers in HAL_OSPI_STATE_RESET only */
+ hospi->ErrorCallback = HAL_OSPI_ErrorCallback;
+ hospi->AbortCpltCallback = HAL_OSPI_AbortCpltCallback;
+ hospi->FifoThresholdCallback = HAL_OSPI_FifoThresholdCallback;
+ hospi->CmdCpltCallback = HAL_OSPI_CmdCpltCallback;
+ hospi->RxCpltCallback = HAL_OSPI_RxCpltCallback;
+ hospi->TxCpltCallback = HAL_OSPI_TxCpltCallback;
+ hospi->RxHalfCpltCallback = HAL_OSPI_RxHalfCpltCallback;
+ hospi->TxHalfCpltCallback = HAL_OSPI_TxHalfCpltCallback;
+ hospi->StatusMatchCallback = HAL_OSPI_StatusMatchCallback;
+ hospi->TimeOutCallback = HAL_OSPI_TimeOutCallback;
+
+ if(hospi->MspInitCallback == NULL)
+ {
+ hospi->MspInitCallback = HAL_OSPI_MspInit;
+ }
+
+ /* Init the low level hardware */
+ hospi->MspInitCallback(hospi);
+#else
+ /* Initialization of the low level hardware */
+ HAL_OSPI_MspInit(hospi);
+#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+
+ /* Configure the default timeout for the OSPI memory access */
+ (void)HAL_OSPI_SetTimeout(hospi, HAL_OSPI_TIMEOUT_DEFAULT_VALUE);
+
+ /* Configure memory type, device size, chip select high time, delay block bypass,
+ free running clock, clock mode */
+ MODIFY_REG(hospi->Instance->DCR1,
+ (OCTOSPI_DCR1_MTYP | OCTOSPI_DCR1_DEVSIZE | OCTOSPI_DCR1_CSHT | OCTOSPI_DCR1_DLYBYP |
+ OCTOSPI_DCR1_FRCK | OCTOSPI_DCR1_CKMODE),
+ (hospi->Init.MemoryType | ((hospi->Init.DeviceSize - 1U) << OCTOSPI_DCR1_DEVSIZE_Pos) |
+ ((hospi->Init.ChipSelectHighTime - 1U) << OCTOSPI_DCR1_CSHT_Pos) |
+ hospi->Init.DelayBlockBypass | hospi->Init.ClockMode));
+
+ /* Configure wrap size */
+ MODIFY_REG(hospi->Instance->DCR2, OCTOSPI_DCR2_WRAPSIZE, hospi->Init.WrapSize);
+
+ /* Configure chip select boundary and maximum transfer */
+ hospi->Instance->DCR3 = ((hospi->Init.ChipSelectBoundary << OCTOSPI_DCR3_CSBOUND_Pos) |
+ (hospi->Init.MaxTran << OCTOSPI_DCR3_MAXTRAN_Pos));
+
+ /* Configure refresh */
+ hospi->Instance->DCR4 = hospi->Init.Refresh;
+
+ /* Configure FIFO threshold */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FTHRES, ((hospi->Init.FifoThreshold - 1U) << OCTOSPI_CR_FTHRES_Pos));
+
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure clock prescaler */
+ MODIFY_REG(hospi->Instance->DCR2, OCTOSPI_DCR2_PRESCALER,
+ ((hospi->Init.ClockPrescaler - 1U) << OCTOSPI_DCR2_PRESCALER_Pos));
+
+ /* Configure Dual Quad mode */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_DQM, hospi->Init.DualQuad);
+
+ /* Configure sample shifting and delay hold quarter cycle */
+ MODIFY_REG(hospi->Instance->TCR, (OCTOSPI_TCR_SSHIFT | OCTOSPI_TCR_DHQC),
+ (hospi->Init.SampleShifting | hospi->Init.DelayHoldQuarterCycle));
+
+ /* Enable OctoSPI */
+ __HAL_OSPI_ENABLE(hospi);
+
+ /* Enable free running clock if needed : must be done after OSPI enable */
+ if (hospi->Init.FreeRunningClock == HAL_OSPI_FREERUNCLK_ENABLE)
+ {
+ SET_BIT(hospi->Instance->DCR1, OCTOSPI_DCR1_FRCK);
+ }
+
+ /* Initialize the OSPI state */
+ if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+ {
+ hospi->State = HAL_OSPI_STATE_HYPERBUS_INIT;
+ }
+ else
+ {
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Initialize the OSPI MSP.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_MspInit(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_OSPI_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize the OSPI peripheral.
+ * @param hospi : OSPI handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_DeInit(OSPI_HandleTypeDef *hospi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the OSPI handle allocation */
+ if (hospi == NULL)
+ {
+ status = HAL_ERROR;
+ /* No error code can be set set as the handler is null */
+ }
+ else
+ {
+ /* Disable OctoSPI */
+ __HAL_OSPI_DISABLE(hospi);
+
+ /* Disable free running clock if needed : must be done after OSPI disable */
+ CLEAR_BIT(hospi->Instance->DCR1, OCTOSPI_DCR1_FRCK);
+
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ if(hospi->MspDeInitCallback == NULL)
+ {
+ hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
+ }
+
+ /* DeInit the low level hardware */
+ hospi->MspDeInitCallback(hospi);
+#else
+ /* De-initialize the low-level hardware */
+ HAL_OSPI_MspDeInit(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+
+ /* Reset the driver state */
+ hospi->State = HAL_OSPI_STATE_RESET;
+ }
+
+ return status;
+}
+
+/**
+ * @brief DeInitialize the OSPI MSP.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_OSPI_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup OSPI_Exported_Functions_Group2 Input and Output operation functions
+ * @brief OSPI Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Handle the interrupts.
+ (+) Handle the command sequence (regular and Hyperbus).
+ (+) Handle the Hyperbus configuration.
+ (+) Transmit data in blocking, interrupt or DMA mode.
+ (+) Receive data in blocking, interrupt or DMA mode.
+ (+) Manage the auto-polling functional mode.
+ (+) Manage the memory-mapped functional mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Handle OSPI interrupt request.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+void HAL_OSPI_IRQHandler(OSPI_HandleTypeDef *hospi)
+{
+ __IO uint32_t *data_reg = &hospi->Instance->DR;
+ uint32_t flag = hospi->Instance->SR;
+ uint32_t itsource = hospi->Instance->CR;
+ uint32_t currentstate = hospi->State;
+
+ /* OctoSPI fifo threshold interrupt occurred -------------------------------*/
+ if (((flag & HAL_OSPI_FLAG_FT) != 0U) && ((itsource & HAL_OSPI_IT_FT) != 0U))
+ {
+ if (currentstate == HAL_OSPI_STATE_BUSY_TX)
+ {
+ /* Write a data in the fifo */
+ *((__IO uint8_t *)data_reg) = *hospi->pBuffPtr;
+ hospi->pBuffPtr++;
+ hospi->XferCount--;
+ }
+ else if (currentstate == HAL_OSPI_STATE_BUSY_RX)
+ {
+ /* Read a data from the fifo */
+ *hospi->pBuffPtr = *((__IO uint8_t *)data_reg);
+ hospi->pBuffPtr++;
+ hospi->XferCount--;
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ if (hospi->XferCount == 0U)
+ {
+ /* All data have been received or transmitted for the transfer */
+ /* Disable fifo threshold interrupt */
+ __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_FT);
+ }
+
+ /* Fifo threshold callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->FifoThresholdCallback(hospi);
+#else
+ HAL_OSPI_FifoThresholdCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/
+ }
+ /* OctoSPI transfer complete interrupt occurred ----------------------------*/
+ else if (((flag & HAL_OSPI_FLAG_TC) != 0U) && ((itsource & HAL_OSPI_IT_TC) != 0U))
+ {
+ if (currentstate == HAL_OSPI_STATE_BUSY_RX)
+ {
+ if ((hospi->XferCount > 0U) && ((flag & OCTOSPI_SR_FLEVEL) != 0U))
+ {
+ /* Read the last data received in the fifo */
+ *hospi->pBuffPtr = *((__IO uint8_t *)data_reg);
+ hospi->pBuffPtr++;
+ hospi->XferCount--;
+ }
+ else if(hospi->XferCount == 0U)
+ {
+ /* Clear flag */
+ hospi->Instance->FCR = HAL_OSPI_FLAG_TC;
+
+ /* Disable the interrupts */
+ __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* RX complete callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->RxCpltCallback(hospi);
+#else
+ HAL_OSPI_RxCpltCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+ else
+ {
+ /* Clear flag */
+ hospi->Instance->FCR = HAL_OSPI_FLAG_TC;
+
+ /* Disable the interrupts */
+ __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ if (currentstate == HAL_OSPI_STATE_BUSY_TX)
+ {
+ /* TX complete callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->TxCpltCallback(hospi);
+#else
+ HAL_OSPI_TxCpltCallback(hospi);
+#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ else if (currentstate == HAL_OSPI_STATE_BUSY_CMD)
+ {
+ /* Command complete callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->CmdCpltCallback(hospi);
+#else
+ HAL_OSPI_CmdCpltCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ else if (currentstate == HAL_OSPI_STATE_ABORT)
+ {
+ if (hospi->ErrorCode == HAL_OSPI_ERROR_NONE)
+ {
+ /* Abort called by the user */
+ /* Abort complete callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->AbortCpltCallback(hospi);
+#else
+ HAL_OSPI_AbortCpltCallback(hospi);
+#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/
+ }
+ else
+ {
+ /* Abort due to an error (eg : DMA error) */
+ /* Error callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->ErrorCallback(hospi);
+#else
+ HAL_OSPI_ErrorCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+ }
+ /* OctoSPI status match interrupt occurred ---------------------------------*/
+ else if (((flag & HAL_OSPI_FLAG_SM) != 0U) && ((itsource & HAL_OSPI_IT_SM) != 0U))
+ {
+ /* Clear flag */
+ hospi->Instance->FCR = HAL_OSPI_FLAG_SM;
+
+ /* Check if automatic poll mode stop is activated */
+ if ((hospi->Instance->CR & OCTOSPI_CR_APMS) != 0U)
+ {
+ /* Disable the interrupts */
+ __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_SM | HAL_OSPI_IT_TE);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+
+ /* Status match callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->StatusMatchCallback(hospi);
+#else
+ HAL_OSPI_StatusMatchCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ /* OctoSPI transfer error interrupt occurred -------------------------------*/
+ else if (((flag & HAL_OSPI_FLAG_TE) != 0U) && ((itsource & HAL_OSPI_IT_TE) != 0U))
+ {
+ /* Clear flag */
+ hospi->Instance->FCR = HAL_OSPI_FLAG_TE;
+
+ /* Disable all interrupts */
+ __HAL_OSPI_DISABLE_IT(hospi, (HAL_OSPI_IT_TO | HAL_OSPI_IT_SM | HAL_OSPI_IT_FT | HAL_OSPI_IT_TC | HAL_OSPI_IT_TE));
+
+ /* Set error code */
+ hospi->ErrorCode = HAL_OSPI_ERROR_TRANSFER;
+
+ /* Check if the DMA is enabled */
+ if ((hospi->Instance->CR & OCTOSPI_CR_DMAEN) != 0U)
+ {
+ /* Disable the DMA transfer on the OctoSPI side */
+ CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+
+ /* Disable the DMA transfer on the DMA side */
+ hospi->hmdma->XferAbortCallback = OSPI_DMAAbortCplt;
+ if (HAL_MDMA_Abort_IT(hospi->hmdma) != HAL_OK)
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Error callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->ErrorCallback(hospi);
+#else
+ HAL_OSPI_ErrorCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/
+ }
+ }
+ else
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Error callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->ErrorCallback(hospi);
+#else
+ HAL_OSPI_ErrorCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ }
+ /* OctoSPI timeout interrupt occurred --------------------------------------*/
+ else if (((flag & HAL_OSPI_FLAG_TO) != 0U) && ((itsource & HAL_OSPI_IT_TO) != 0U))
+ {
+ /* Clear flag */
+ hospi->Instance->FCR = HAL_OSPI_FLAG_TO;
+
+ /* Timeout callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->TimeOutCallback(hospi);
+#else
+ HAL_OSPI_TimeOutCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+}
+
+/**
+ * @brief Set the command configuration.
+ * @param hospi : OSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Command(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status;
+ uint32_t state;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters of the command structure */
+ assert_param(IS_OSPI_OPERATION_TYPE(cmd->OperationType));
+
+ if (hospi->Init.DualQuad == HAL_OSPI_DUALQUAD_DISABLE)
+ {
+ assert_param(IS_OSPI_FLASH_ID(cmd->FlashId));
+ }
+
+ assert_param(IS_OSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_OSPI_INSTRUCTION_SIZE (cmd->InstructionSize));
+ assert_param(IS_OSPI_INSTRUCTION_DTR_MODE(cmd->InstructionDtrMode));
+ }
+
+ assert_param(IS_OSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize));
+ assert_param(IS_OSPI_ADDRESS_DTR_MODE(cmd->AddressDtrMode));
+ }
+
+ assert_param(IS_OSPI_ALT_BYTES_MODE(cmd->AlternateBytesMode));
+ if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_OSPI_ALT_BYTES_SIZE (cmd->AlternateBytesSize));
+ assert_param(IS_OSPI_ALT_BYTES_DTR_MODE(cmd->AlternateBytesDtrMode));
+ }
+
+ assert_param(IS_OSPI_DATA_MODE(cmd->DataMode));
+ if (cmd->DataMode != HAL_OSPI_DATA_NONE)
+ {
+ if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG)
+ {
+ assert_param(IS_OSPI_NUMBER_DATA (cmd->NbData));
+ }
+ assert_param(IS_OSPI_DATA_DTR_MODE(cmd->DataDtrMode));
+ assert_param(IS_OSPI_DUMMY_CYCLES (cmd->DummyCycles));
+ }
+
+ assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode));
+ assert_param(IS_OSPI_SIOO_MODE(cmd->SIOOMode));
+
+ /* Check the state of the driver */
+ state = hospi->State;
+ if (((state == HAL_OSPI_STATE_READY) && (hospi->Init.MemoryType != HAL_OSPI_MEMTYPE_HYPERBUS)) ||
+ ((state == HAL_OSPI_STATE_READ_CMD_CFG) && ((cmd->OperationType == HAL_OSPI_OPTYPE_WRITE_CFG)
+ || (cmd->OperationType == HAL_OSPI_OPTYPE_WRAP_CFG))) ||
+ ((state == HAL_OSPI_STATE_WRITE_CMD_CFG) && ((cmd->OperationType == HAL_OSPI_OPTYPE_READ_CFG) ||
+ (cmd->OperationType == HAL_OSPI_OPTYPE_WRAP_CFG))))
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Initialize error code */
+ hospi->ErrorCode = HAL_OSPI_ERROR_NONE;
+
+ /* Configure the registers */
+ status = OSPI_ConfigCmd(hospi, cmd);
+
+ if (status == HAL_OK)
+ {
+ if (cmd->DataMode == HAL_OSPI_DATA_NONE)
+ {
+ /* When there is no data phase, the transfer start as soon as the configuration is done
+ so wait until TC flag is set to go back in idle state */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC);
+ }
+ else
+ {
+ /* Update the state */
+ if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG)
+ {
+ hospi->State = HAL_OSPI_STATE_CMD_CFG;
+ }
+ else if (cmd->OperationType == HAL_OSPI_OPTYPE_READ_CFG)
+ {
+ if (hospi->State == HAL_OSPI_STATE_WRITE_CMD_CFG)
+ {
+ hospi->State = HAL_OSPI_STATE_CMD_CFG;
+ }
+ else
+ {
+ hospi->State = HAL_OSPI_STATE_READ_CMD_CFG;
+ }
+ }
+ else if (cmd->OperationType == HAL_OSPI_OPTYPE_WRITE_CFG)
+ {
+ if (hospi->State == HAL_OSPI_STATE_READ_CMD_CFG)
+ {
+ hospi->State = HAL_OSPI_STATE_CMD_CFG;
+ }
+ else
+ {
+ hospi->State = HAL_OSPI_STATE_WRITE_CMD_CFG;
+ }
+ }
+ else
+ {
+ /* Wrap configuration, no state change */
+ }
+ }
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Set the command configuration in interrupt mode.
+ * @param hospi : OSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @note This function is used only in Indirect Read or Write Modes
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Command_IT(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters of the command structure */
+ assert_param(IS_OSPI_OPERATION_TYPE(cmd->OperationType));
+
+ if (hospi->Init.DualQuad == HAL_OSPI_DUALQUAD_DISABLE)
+ {
+ assert_param(IS_OSPI_FLASH_ID(cmd->FlashId));
+ }
+
+ assert_param(IS_OSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_OSPI_INSTRUCTION_SIZE (cmd->InstructionSize));
+ assert_param(IS_OSPI_INSTRUCTION_DTR_MODE(cmd->InstructionDtrMode));
+ }
+
+ assert_param(IS_OSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize));
+ assert_param(IS_OSPI_ADDRESS_DTR_MODE(cmd->AddressDtrMode));
+ }
+
+ assert_param(IS_OSPI_ALT_BYTES_MODE(cmd->AlternateBytesMode));
+ if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_OSPI_ALT_BYTES_SIZE (cmd->AlternateBytesSize));
+ assert_param(IS_OSPI_ALT_BYTES_DTR_MODE(cmd->AlternateBytesDtrMode));
+ }
+
+ assert_param(IS_OSPI_DATA_MODE(cmd->DataMode));
+ if (cmd->DataMode != HAL_OSPI_DATA_NONE)
+ {
+ assert_param(IS_OSPI_NUMBER_DATA (cmd->NbData));
+ assert_param(IS_OSPI_DATA_DTR_MODE(cmd->DataDtrMode));
+ assert_param(IS_OSPI_DUMMY_CYCLES (cmd->DummyCycles));
+ }
+
+ assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode));
+ assert_param(IS_OSPI_SIOO_MODE(cmd->SIOOMode));
+
+ /* Check the state of the driver */
+ if ((hospi->State == HAL_OSPI_STATE_READY) && (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG) &&
+ (cmd->DataMode == HAL_OSPI_DATA_NONE) && (hospi->Init.MemoryType != HAL_OSPI_MEMTYPE_HYPERBUS))
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Initialize error code */
+ hospi->ErrorCode = HAL_OSPI_ERROR_NONE;
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC);
+
+ /* Configure the registers */
+ status = OSPI_ConfigCmd(hospi, cmd);
+
+ if (status == HAL_OK)
+ {
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_BUSY_CMD;
+
+ /* Enable the transfer complete and transfer error interrupts */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_TE);
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the Hyperbus parameters.
+ * @param hospi : OSPI handle
+ * @param cfg : Structure containing the Hyperbus configuration
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_HyperbusCfg(OSPI_HandleTypeDef *hospi, OSPI_HyperbusCfgTypeDef *cfg, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status;
+ uint32_t state;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters of the hyperbus configuration structure */
+ assert_param(IS_OSPI_RW_RECOVERY_TIME (cfg->RWRecoveryTime));
+ assert_param(IS_OSPI_ACCESS_TIME (cfg->AccessTime));
+ assert_param(IS_OSPI_WRITE_ZERO_LATENCY(cfg->WriteZeroLatency));
+ assert_param(IS_OSPI_LATENCY_MODE (cfg->LatencyMode));
+
+ /* Check the state of the driver */
+ state = hospi->State;
+ if ((state == HAL_OSPI_STATE_HYPERBUS_INIT) || (state == HAL_OSPI_STATE_READY))
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure Hyperbus configuration Latency register */
+ WRITE_REG(hospi->Instance->HLCR, ((cfg->RWRecoveryTime << OCTOSPI_HLCR_TRWR_Pos) |
+ (cfg->AccessTime << OCTOSPI_HLCR_TACC_Pos) |
+ cfg->WriteZeroLatency | cfg->LatencyMode));
+
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Set the Hyperbus command configuration.
+ * @param hospi : OSPI handle
+ * @param cmd : Structure containing the Hyperbus command
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_HyperbusCmd(OSPI_HandleTypeDef *hospi, OSPI_HyperbusCmdTypeDef *cmd, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters of the hyperbus command structure */
+ assert_param(IS_OSPI_ADDRESS_SPACE(cmd->AddressSpace));
+ assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize));
+ assert_param(IS_OSPI_NUMBER_DATA (cmd->NbData));
+ assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode));
+
+ /* Check the state of the driver */
+ if ((hospi->State == HAL_OSPI_STATE_READY) && (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS))
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Re-initialize the value of the functional mode */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, 0U);
+
+ /* Configure the address space in the DCR1 register */
+ MODIFY_REG(hospi->Instance->DCR1, OCTOSPI_DCR1_MTYP_0, cmd->AddressSpace);
+
+ /* Configure the CCR and WCCR registers with the address size and the following configuration :
+ - DQS signal enabled (used as RWDS)
+ - DTR mode enabled on address and data
+ - address and data on 8 lines */
+ WRITE_REG(hospi->Instance->CCR, (cmd->DQSMode | OCTOSPI_CCR_DDTR | OCTOSPI_CCR_DMODE_2 |
+ cmd->AddressSize | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADMODE_2));
+ WRITE_REG(hospi->Instance->WCCR, (cmd->DQSMode | OCTOSPI_WCCR_DDTR | OCTOSPI_WCCR_DMODE_2 |
+ cmd->AddressSize | OCTOSPI_WCCR_ADDTR | OCTOSPI_WCCR_ADMODE_2));
+
+ /* Configure the DLR register with the number of data */
+ WRITE_REG(hospi->Instance->DLR, (cmd->NbData - 1U));
+
+ /* Configure the AR register with the address value */
+ WRITE_REG(hospi->Instance->AR, cmd->Address);
+
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_CMD_CFG;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hospi : OSPI handle
+ * @param pData : pointer to data buffer
+ * @param Timeout : Timeout duration
+ * @note This function is used only in Indirect Write Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Transmit(OSPI_HandleTypeDef *hospi, uint8_t *pData, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+ __IO uint32_t *data_reg = &hospi->Instance->DR;
+
+ /* Check the data pointer allocation */
+ if (pData == NULL)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ else
+ {
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ /* Configure counters and size */
+ hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U;
+ hospi->XferSize = hospi->XferCount;
+ hospi->pBuffPtr = pData;
+
+ /* Configure CR register with functional mode as indirect write */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ do
+ {
+ /* Wait till fifo threshold flag is set to send data */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_FT, SET, tickstart, Timeout);
+
+ if (status != HAL_OK)
+ {
+ break;
+ }
+
+ *((__IO uint8_t *)data_reg) = *hospi->pBuffPtr;
+ hospi->pBuffPtr++;
+ hospi->XferCount--;
+ } while (hospi->XferCount > 0U);
+
+ if (status == HAL_OK)
+ {
+ /* Wait till transfer complete flag is set to go back in idle state */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear transfer complete flag */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hospi : OSPI handle
+ * @param pData : pointer to data buffer
+ * @param Timeout : Timeout duration
+ * @note This function is used only in Indirect Read Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Receive(OSPI_HandleTypeDef *hospi, uint8_t *pData, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+ __IO uint32_t *data_reg = &hospi->Instance->DR;
+ uint32_t addr_reg = hospi->Instance->AR;
+ uint32_t ir_reg = hospi->Instance->IR;
+
+ /* Check the data pointer allocation */
+ if (pData == NULL)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ else
+ {
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ /* Configure counters and size */
+ hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U;
+ hospi->XferSize = hospi->XferCount;
+ hospi->pBuffPtr = pData;
+
+ /* Configure CR register with functional mode as indirect read */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Trig the transfer by re-writing address or instruction register */
+ if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ WRITE_REG(hospi->Instance->IR, ir_reg);
+ }
+ }
+
+ do
+ {
+ /* Wait till fifo threshold or transfer complete flags are set to read received data */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, (HAL_OSPI_FLAG_FT | HAL_OSPI_FLAG_TC), SET, tickstart, Timeout);
+
+ if (status != HAL_OK)
+ {
+ break;
+ }
+
+ *hospi->pBuffPtr = *((__IO uint8_t *)data_reg);
+ hospi->pBuffPtr++;
+ hospi->XferCount--;
+ } while(hospi->XferCount > 0U);
+
+ if (status == HAL_OK)
+ {
+ /* Wait till transfer complete flag is set to go back in idle state */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear transfer complete flag */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Send an amount of data in non-blocking mode with interrupt.
+ * @param hospi : OSPI handle
+ * @param pData : pointer to data buffer
+ * @note This function is used only in Indirect Write Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Transmit_IT(OSPI_HandleTypeDef *hospi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the data pointer allocation */
+ if (pData == NULL)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ else
+ {
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ /* Configure counters and size */
+ hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U;
+ hospi->XferSize = hospi->XferCount;
+ hospi->pBuffPtr = pData;
+
+ /* Configure CR register with functional mode as indirect write */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC);
+
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_BUSY_TX;
+
+ /* Enable the transfer complete, fifo threshold and transfer error interrupts */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with interrupt.
+ * @param hospi : OSPI handle
+ * @param pData : pointer to data buffer
+ * @note This function is used only in Indirect Read Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Receive_IT(OSPI_HandleTypeDef *hospi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t addr_reg = hospi->Instance->AR;
+ uint32_t ir_reg = hospi->Instance->IR;
+
+ /* Check the data pointer allocation */
+ if (pData == NULL)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ else
+ {
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ /* Configure counters and size */
+ hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U;
+ hospi->XferSize = hospi->XferCount;
+ hospi->pBuffPtr = pData;
+
+ /* Configure CR register with functional mode as indirect read */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC);
+
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_BUSY_RX;
+
+ /* Enable the transfer complete, fifo threshold and transfer error interrupts */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE);
+
+ /* Trig the transfer by re-writing address or instruction register */
+ if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ WRITE_REG(hospi->Instance->IR, ir_reg);
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Send an amount of data in non-blocking mode with DMA.
+ * @param hospi : OSPI handle
+ * @param pData : pointer to data buffer
+ * @note This function is used only in Indirect Write Mode
+ * @note If DMA peripheral access is configured as halfword, the number
+ * of data and the fifo threshold should be aligned on halfword
+ * @note If DMA peripheral access is configured as word, the number
+ * of data and the fifo threshold should be aligned on word
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Transmit_DMA(OSPI_HandleTypeDef *hospi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t data_size = hospi->Instance->DLR + 1U;
+
+ /* Check the data pointer allocation */
+ if (pData == NULL)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ else
+ {
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ hospi->XferCount = data_size;
+
+ {
+ hospi->XferSize = hospi->XferCount;
+ hospi->pBuffPtr = pData;
+
+ /* Configure CR register with functional mode as indirect write */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC);
+
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_BUSY_TX;
+
+ /* Set the MDMA transfer complete callback */
+ hospi->hmdma->XferCpltCallback = OSPI_DMACplt;
+
+ /* Set the MDMA error callback */
+ hospi->hmdma->XferErrorCallback = OSPI_DMAError;
+
+ /* Clear the MDMA abort callback */
+ hospi->hmdma->XferAbortCallback = NULL;
+
+ /* In Transmit mode , the MDMA destination is the OSPI DR register : Force the MDMA Destination Increment to disable */
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) ,MDMA_DEST_INC_DISABLE);
+
+ /* Update MDMA configuration with the correct SourceInc field for Write operation */
+ if (hospi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_BYTE)
+ {
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_BYTE);
+ }
+ else if (hospi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_HALFWORD)
+ {
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_HALFWORD);
+ }
+ else if (hospi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_WORD)
+ {
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_WORD);
+ }
+ else
+ {
+ /* in case of incorrect source data size */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_DMA;
+ status = HAL_ERROR;
+ }
+
+ /* Enable the transmit MDMA Channel */
+ if (HAL_MDMA_Start_IT(hospi->hmdma, (uint32_t)pData, (uint32_t)&hospi->Instance->DR, hospi->XferSize,1) == HAL_OK)
+ {
+ /* Enable the transfer error interrupt */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE);
+
+ /* Enable the MDMA transfer by setting the DMAEN bit not needed for MDMA*/
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA.
+ * @param hospi : OSPI handle
+ * @param pData : pointer to data buffer.
+ * @note This function is used only in Indirect Read Mode
+ * @note If DMA peripheral access is configured as halfword, the number
+ * of data and the fifo threshold should be aligned on halfword
+ * @note If DMA peripheral access is configured as word, the number
+ * of data and the fifo threshold should be aligned on word
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_Receive_DMA(OSPI_HandleTypeDef *hospi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t data_size = hospi->Instance->DLR + 1U;
+ uint32_t addr_reg = hospi->Instance->AR;
+ uint32_t ir_reg = hospi->Instance->IR;
+ /* Check the data pointer allocation */
+ if (pData == NULL)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ else
+ {
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ hospi->XferCount = data_size;
+
+ {
+ hospi->XferSize = hospi->XferCount;
+ hospi->pBuffPtr = pData;
+
+ /* Configure CR register with functional mode as indirect read */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC);
+
+ /* Update the state */
+ hospi->State = HAL_OSPI_STATE_BUSY_RX;
+
+ /* Set the DMA transfer complete callback */
+ hospi->hmdma->XferCpltCallback = OSPI_DMACplt;
+
+ /* Set the DMA error callback */
+ hospi->hmdma->XferErrorCallback = OSPI_DMAError;
+
+ /* Clear the DMA abort callback */
+ hospi->hmdma->XferAbortCallback = NULL;
+
+ /* In Receive mode , the MDMA source is the OSPI DR register : Force the MDMA Source Increment to disable */
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_DISABLE);
+
+ /* Update MDMA configuration with the correct DestinationInc field for read operation */
+ if (hospi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_BYTE)
+ {
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_BYTE);
+ }
+ else if (hospi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_HALFWORD)
+ {
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_HALFWORD);
+ }
+ else if (hospi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_WORD)
+ {
+ MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_WORD);
+ }
+ else
+ {
+ /* in case of incorrect destination data size */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_DMA;
+ status = HAL_ERROR;
+ }
+
+ /* Enable the transmit MDMA Channel */
+ if (HAL_MDMA_Start_IT(hospi->hmdma, (uint32_t)&hospi->Instance->DR, (uint32_t)pData, hospi->XferSize, 1) == HAL_OK)
+ {
+ /* Enable the transfer error interrupt */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE);
+
+ /* Trig the transfer by re-writing address or instruction register */
+ if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ WRITE_REG(hospi->Instance->IR, ir_reg);
+ }
+ }
+
+ /* Enable the MDMA transfer by setting the DMAEN bit not needed for MDMA*/
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the OSPI Automatic Polling Mode in blocking mode.
+ * @param hospi : OSPI handle
+ * @param cfg : structure that contains the polling configuration information.
+ * @param Timeout : Timeout duration
+ * @note This function is used only in Automatic Polling Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_AutoPolling(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t addr_reg = hospi->Instance->AR;
+ uint32_t ir_reg = hospi->Instance->IR;
+#ifdef USE_FULL_ASSERT
+ uint32_t dlr_reg = hospi->Instance->DLR;
+#endif /* USE_FULL_ASSERT */
+
+ /* Check the parameters of the autopolling configuration structure */
+ assert_param(IS_OSPI_MATCH_MODE (cfg->MatchMode));
+ assert_param(IS_OSPI_AUTOMATIC_STOP (cfg->AutomaticStop));
+ assert_param(IS_OSPI_INTERVAL (cfg->Interval));
+ assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg+1U));
+
+ /* Check the state */
+ if ((hospi->State == HAL_OSPI_STATE_CMD_CFG) && (cfg->AutomaticStop == HAL_OSPI_AUTOMATIC_STOP_ENABLE))
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure registers */
+ WRITE_REG (hospi->Instance->PSMAR, cfg->Match);
+ WRITE_REG (hospi->Instance->PSMKR, cfg->Mask);
+ WRITE_REG (hospi->Instance->PIR, cfg->Interval);
+ MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE),
+ (cfg->MatchMode | cfg->AutomaticStop | OSPI_FUNCTIONAL_MODE_AUTO_POLLING));
+
+ /* Trig the transfer by re-writing address or instruction register */
+ if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ WRITE_REG(hospi->Instance->IR, ir_reg);
+ }
+ }
+
+ /* Wait till status match flag is set to go back in idle state */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_SM, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear status match flag */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_SM);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the OSPI Automatic Polling Mode in non-blocking mode.
+ * @param hospi : OSPI handle
+ * @param cfg : structure that contains the polling configuration information.
+ * @note This function is used only in Automatic Polling Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_AutoPolling_IT(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t addr_reg = hospi->Instance->AR;
+ uint32_t ir_reg = hospi->Instance->IR;
+#ifdef USE_FULL_ASSERT
+ uint32_t dlr_reg = hospi->Instance->DLR;
+#endif /* USE_FULL_ASSERT */
+
+ /* Check the parameters of the autopolling configuration structure */
+ assert_param(IS_OSPI_MATCH_MODE (cfg->MatchMode));
+ assert_param(IS_OSPI_AUTOMATIC_STOP (cfg->AutomaticStop));
+ assert_param(IS_OSPI_INTERVAL (cfg->Interval));
+ assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg+1U));
+
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure registers */
+ WRITE_REG (hospi->Instance->PSMAR, cfg->Match);
+ WRITE_REG (hospi->Instance->PSMKR, cfg->Mask);
+ WRITE_REG (hospi->Instance->PIR, cfg->Interval);
+ MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE),
+ (cfg->MatchMode | cfg->AutomaticStop | OSPI_FUNCTIONAL_MODE_AUTO_POLLING));
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_SM);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_BUSY_AUTO_POLLING;
+
+ /* Enable the status match and transfer error interrupts */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_SM | HAL_OSPI_IT_TE);
+
+ /* Trig the transfer by re-writing address or instruction register */
+ if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE)
+ {
+ WRITE_REG(hospi->Instance->AR, addr_reg);
+ }
+ else
+ {
+ WRITE_REG(hospi->Instance->IR, ir_reg);
+ }
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the Memory Mapped mode.
+ * @param hospi : OSPI handle
+ * @param cfg : structure that contains the memory mapped configuration information.
+ * @note This function is used only in Memory mapped Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_MemoryMapped(OSPI_HandleTypeDef *hospi, OSPI_MemoryMappedTypeDef *cfg)
+{
+ HAL_StatusTypeDef status;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters of the memory-mapped configuration structure */
+ assert_param(IS_OSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation));
+
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_CMD_CFG)
+ {
+ /* Wait till busy flag is reset */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_BUSY_MEM_MAPPED;
+
+ if (cfg->TimeOutActivation == HAL_OSPI_TIMEOUT_COUNTER_ENABLE)
+ {
+ assert_param(IS_OSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod));
+
+ /* Configure register */
+ WRITE_REG(hospi->Instance->LPTR, cfg->TimeOutPeriod);
+
+ /* Clear flags related to interrupt */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TO);
+
+ /* Enable the timeout interrupt */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TO);
+ }
+
+ /* Configure CR register with functional mode as memory-mapped */
+ MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_TCEN | OCTOSPI_CR_FMODE),
+ (cfg->TimeOutActivation | OSPI_FUNCTIONAL_MODE_MEMORY_MAPPED));
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Transfer Error callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_ErrorCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_OSPI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Abort completed callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_AbortCpltCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_OSPI_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FIFO Threshold callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_FifoThresholdCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_OSPI_FIFOThresholdCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Command completed callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_CmdCpltCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_OSPI_CmdCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_RxCpltCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_OSPI_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer completed callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+ __weak void HAL_OSPI_TxCpltCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_OSPI_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_RxHalfCpltCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_OSPI_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_TxHalfCpltCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_OSPI_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Status Match callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_StatusMatchCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_OSPI_StatusMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timeout callback.
+ * @param hospi : OSPI handle
+ * @retval None
+ */
+__weak void HAL_OSPI_TimeOutCallback(OSPI_HandleTypeDef *hospi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hospi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_OSPI_TimeOutCallback could be implemented in the user file
+ */
+}
+
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief Register a User OSPI Callback
+ * To be used instead of the weak (surcharged) predefined callback
+ * @param hospi : OSPI handle
+ * @param CallbackID : ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_OSPI_ERROR_CB_ID OSPI Error Callback ID
+ * @arg @ref HAL_OSPI_ABORT_CB_ID OSPI Abort Callback ID
+ * @arg @ref HAL_OSPI_FIFO_THRESHOLD_CB_ID OSPI FIFO Threshold Callback ID
+ * @arg @ref HAL_OSPI_CMD_CPLT_CB_ID OSPI Command Complete Callback ID
+ * @arg @ref HAL_OSPI_RX_CPLT_CB_ID OSPI Rx Complete Callback ID
+ * @arg @ref HAL_OSPI_TX_CPLT_CB_ID OSPI Tx Complete Callback ID
+ * @arg @ref HAL_OSPI_RX_HALF_CPLT_CB_ID OSPI Rx Half Complete Callback ID
+ * @arg @ref HAL_OSPI_TX_HALF_CPLT_CB_ID OSPI Tx Half Complete Callback ID
+ * @arg @ref HAL_OSPI_STATUS_MATCH_CB_ID OSPI Status Match Callback ID
+ * @arg @ref HAL_OSPI_TIMEOUT_CB_ID OSPI Timeout Callback ID
+ * @arg @ref HAL_OSPI_MSP_INIT_CB_ID OSPI MspInit callback ID
+ * @arg @ref HAL_OSPI_MSP_DEINIT_CB_ID OSPI MspDeInit callback ID
+ * @param pCallback : pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_OSPI_RegisterCallback(OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID,
+ pOSPI_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+
+ if(hospi->State == HAL_OSPI_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_OSPI_ERROR_CB_ID :
+ hospi->ErrorCallback = pCallback;
+ break;
+ case HAL_OSPI_ABORT_CB_ID :
+ hospi->AbortCpltCallback = pCallback;
+ break;
+ case HAL_OSPI_FIFO_THRESHOLD_CB_ID :
+ hospi->FifoThresholdCallback = pCallback;
+ break;
+ case HAL_OSPI_CMD_CPLT_CB_ID :
+ hospi->CmdCpltCallback = pCallback;
+ break;
+ case HAL_OSPI_RX_CPLT_CB_ID :
+ hospi->RxCpltCallback = pCallback;
+ break;
+ case HAL_OSPI_TX_CPLT_CB_ID :
+ hospi->TxCpltCallback = pCallback;
+ break;
+ case HAL_OSPI_RX_HALF_CPLT_CB_ID :
+ hospi->RxHalfCpltCallback = pCallback;
+ break;
+ case HAL_OSPI_TX_HALF_CPLT_CB_ID :
+ hospi->TxHalfCpltCallback = pCallback;
+ break;
+ case HAL_OSPI_STATUS_MATCH_CB_ID :
+ hospi->StatusMatchCallback = pCallback;
+ break;
+ case HAL_OSPI_TIMEOUT_CB_ID :
+ hospi->TimeOutCallback = pCallback;
+ break;
+ case HAL_OSPI_MSP_INIT_CB_ID :
+ hospi->MspInitCallback = pCallback;
+ break;
+ case HAL_OSPI_MSP_DEINIT_CB_ID :
+ hospi->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hospi->State == HAL_OSPI_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_OSPI_MSP_INIT_CB_ID :
+ hospi->MspInitCallback = pCallback;
+ break;
+ case HAL_OSPI_MSP_DEINIT_CB_ID :
+ hospi->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Unregister a User OSPI Callback
+ * OSPI Callback is redirected to the weak (surcharged) predefined callback
+ * @param hospi : OSPI handle
+ * @param CallbackID : ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_OSPI_ERROR_CB_ID OSPI Error Callback ID
+ * @arg @ref HAL_OSPI_ABORT_CB_ID OSPI Abort Callback ID
+ * @arg @ref HAL_OSPI_FIFO_THRESHOLD_CB_ID OSPI FIFO Threshold Callback ID
+ * @arg @ref HAL_OSPI_CMD_CPLT_CB_ID OSPI Command Complete Callback ID
+ * @arg @ref HAL_OSPI_RX_CPLT_CB_ID OSPI Rx Complete Callback ID
+ * @arg @ref HAL_OSPI_TX_CPLT_CB_ID OSPI Tx Complete Callback ID
+ * @arg @ref HAL_OSPI_RX_HALF_CPLT_CB_ID OSPI Rx Half Complete Callback ID
+ * @arg @ref HAL_OSPI_TX_HALF_CPLT_CB_ID OSPI Tx Half Complete Callback ID
+ * @arg @ref HAL_OSPI_STATUS_MATCH_CB_ID OSPI Status Match Callback ID
+ * @arg @ref HAL_OSPI_TIMEOUT_CB_ID OSPI Timeout Callback ID
+ * @arg @ref HAL_OSPI_MSP_INIT_CB_ID OSPI MspInit callback ID
+ * @arg @ref HAL_OSPI_MSP_DEINIT_CB_ID OSPI MspDeInit callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_OSPI_UnRegisterCallback (OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(hospi->State == HAL_OSPI_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_OSPI_ERROR_CB_ID :
+ hospi->ErrorCallback = HAL_OSPI_ErrorCallback;
+ break;
+ case HAL_OSPI_ABORT_CB_ID :
+ hospi->AbortCpltCallback = HAL_OSPI_AbortCpltCallback;
+ break;
+ case HAL_OSPI_FIFO_THRESHOLD_CB_ID :
+ hospi->FifoThresholdCallback = HAL_OSPI_FifoThresholdCallback;
+ break;
+ case HAL_OSPI_CMD_CPLT_CB_ID :
+ hospi->CmdCpltCallback = HAL_OSPI_CmdCpltCallback;
+ break;
+ case HAL_OSPI_RX_CPLT_CB_ID :
+ hospi->RxCpltCallback = HAL_OSPI_RxCpltCallback;
+ break;
+ case HAL_OSPI_TX_CPLT_CB_ID :
+ hospi->TxCpltCallback = HAL_OSPI_TxCpltCallback;
+ break;
+ case HAL_OSPI_RX_HALF_CPLT_CB_ID :
+ hospi->RxHalfCpltCallback = HAL_OSPI_RxHalfCpltCallback;
+ break;
+ case HAL_OSPI_TX_HALF_CPLT_CB_ID :
+ hospi->TxHalfCpltCallback = HAL_OSPI_TxHalfCpltCallback;
+ break;
+ case HAL_OSPI_STATUS_MATCH_CB_ID :
+ hospi->StatusMatchCallback = HAL_OSPI_StatusMatchCallback;
+ break;
+ case HAL_OSPI_TIMEOUT_CB_ID :
+ hospi->TimeOutCallback = HAL_OSPI_TimeOutCallback;
+ break;
+ case HAL_OSPI_MSP_INIT_CB_ID :
+ hospi->MspInitCallback = HAL_OSPI_MspInit;
+ break;
+ case HAL_OSPI_MSP_DEINIT_CB_ID :
+ hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hospi->State == HAL_OSPI_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_OSPI_MSP_INIT_CB_ID :
+ hospi->MspInitCallback = HAL_OSPI_MspInit;
+ break;
+ case HAL_OSPI_MSP_DEINIT_CB_ID :
+ hospi->MspDeInitCallback = HAL_OSPI_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ return status;
+}
+#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+
+/**
+ * @}
+ */
+
+/** @defgroup OSPI_Exported_Functions_Group3 Peripheral Control and State functions
+ * @brief OSPI control and State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control and State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Check in run-time the state of the driver.
+ (+) Check the error code set during last operation.
+ (+) Abort any operation.
+ (+) Manage the Fifo threshold.
+ (+) Configure the timeout duration used in the driver.
+
+@endverbatim
+ * @{
+ */
+
+/**
+* @brief Abort the current transmission.
+* @param hospi : OSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_OSPI_Abort(OSPI_HandleTypeDef *hospi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t state;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check if the state is in one of the busy or configured states */
+ state = hospi->State;
+ if (((state & OSPI_BUSY_STATE_MASK) != 0U) || ((state & OSPI_CFG_STATE_MASK) != 0U))
+ {
+ /* Check if the DMA is enabled */
+ if ((hospi->Instance->CR & OCTOSPI_CR_DMAEN) != 0U)
+ {
+ /* Disable the DMA transfer on the OctoSPI side */
+ CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+
+ /* Disable the DMA transfer on the DMA side */
+ status = HAL_MDMA_Abort(hospi->hmdma);
+ if (status != HAL_OK)
+ {
+ hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
+ }
+ }
+
+ if (__HAL_OSPI_GET_FLAG(hospi, HAL_OSPI_FLAG_BUSY) != RESET)
+ {
+ /* Perform an abort of the OctoSPI */
+ SET_BIT(hospi->Instance->CR, OCTOSPI_CR_ABORT);
+
+ /* Wait until the transfer complete flag is set to go back in idle state */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, hospi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear transfer complete flag */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC);
+
+ /* Wait until the busy flag is reset to go back in idle state */
+ status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+* @brief Abort the current transmission (non-blocking function)
+* @param hospi : OSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_OSPI_Abort_IT(OSPI_HandleTypeDef *hospi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t state;
+
+ /* Check if the state is in one of the busy or configured states */
+ state = hospi->State;
+ if (((state & OSPI_BUSY_STATE_MASK) != 0U) || ((state & OSPI_CFG_STATE_MASK) != 0U))
+ {
+ /* Disable all interrupts */
+ __HAL_OSPI_DISABLE_IT(hospi, (HAL_OSPI_IT_TO | HAL_OSPI_IT_SM | HAL_OSPI_IT_FT | HAL_OSPI_IT_TC | HAL_OSPI_IT_TE));
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_ABORT;
+
+ /* Check if the DMA is enabled */
+ if ((hospi->Instance->CR & OCTOSPI_CR_DMAEN) != 0U)
+ {
+ /* Disable the DMA transfer on the OctoSPI side */
+ CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+
+ /* Disable the DMA transfer on the DMA side */
+ hospi->hmdma->XferAbortCallback = OSPI_DMAAbortCplt;
+ if (HAL_MDMA_Abort_IT(hospi->hmdma) != HAL_OK)
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Abort callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->AbortCpltCallback(hospi);
+#else
+ HAL_OSPI_AbortCpltCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/
+ }
+ }
+ else
+ {
+ if (__HAL_OSPI_GET_FLAG(hospi, HAL_OSPI_FLAG_BUSY) != RESET)
+ {
+ /* Clear transfer complete flag */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC);
+
+ /* Enable the transfer complete interrupts */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC);
+
+ /* Perform an abort of the OctoSPI */
+ SET_BIT(hospi->Instance->CR, OCTOSPI_CR_ABORT);
+ }
+ else
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Abort callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->AbortCpltCallback(hospi);
+#else
+ HAL_OSPI_AbortCpltCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/** @brief Set OSPI Fifo threshold.
+ * @param hospi : OSPI handle.
+ * @param Threshold : Threshold of the Fifo.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPI_SetFifoThreshold(OSPI_HandleTypeDef *hospi, uint32_t Threshold)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the state */
+ if ((hospi->State & OSPI_BUSY_STATE_MASK) == 0U)
+ {
+ /* Synchronize initialization structure with the new fifo threshold value */
+ hospi->Init.FifoThreshold = Threshold;
+
+ /* Configure new fifo threshold */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FTHRES, ((hospi->Init.FifoThreshold-1U) << OCTOSPI_CR_FTHRES_Pos));
+
+ }
+ else
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/** @brief Get OSPI Fifo threshold.
+ * @param hospi : OSPI handle.
+ * @retval Fifo threshold
+ */
+uint32_t HAL_OSPI_GetFifoThreshold(OSPI_HandleTypeDef *hospi)
+{
+ return ((READ_BIT(hospi->Instance->CR, OCTOSPI_CR_FTHRES) >> OCTOSPI_CR_FTHRES_Pos) + 1U);
+}
+
+/** @brief Set OSPI timeout.
+ * @param hospi : OSPI handle.
+ * @param Timeout : Timeout for the memory access.
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_OSPI_SetTimeout(OSPI_HandleTypeDef *hospi, uint32_t Timeout)
+{
+ hospi->Timeout = Timeout;
+ return HAL_OK;
+}
+
+/**
+* @brief Return the OSPI error code.
+* @param hospi : OSPI handle
+* @retval OSPI Error Code
+*/
+uint32_t HAL_OSPI_GetError(OSPI_HandleTypeDef *hospi)
+{
+ return hospi->ErrorCode;
+}
+
+/**
+ * @brief Return the OSPI handle state.
+ * @param hospi : OSPI handle
+ * @retval HAL state
+ */
+uint32_t HAL_OSPI_GetState(OSPI_HandleTypeDef *hospi)
+{
+ /* Return OSPI handle state */
+ return hospi->State;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup OSPI_Exported_Functions_Group4 IO Manager configuration function
+ * @brief OSPI IO Manager configuration function
+ *
+@verbatim
+ ===============================================================================
+ ##### IO Manager configuration function #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Configure the IO manager.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the OctoSPI IO manager.
+ * @param hospi : OSPI handle
+ * @param cfg : Configuration of the IO Manager for the instance
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_OSPIM_Config(OSPI_HandleTypeDef *hospi, OSPIM_CfgTypeDef *cfg, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t instance;
+ uint8_t index;
+ uint8_t ospi_enabled = 0U;
+ uint8_t other_instance;
+ OSPIM_CfgTypeDef IOM_cfg[OSPI_NB_INSTANCE];
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(Timeout);
+
+ /* Check the parameters of the OctoSPI IO Manager configuration structure */
+ assert_param(IS_OSPIM_PORT(cfg->ClkPort));
+ assert_param(IS_OSPIM_DQS_PORT(cfg->DQSPort));
+ assert_param(IS_OSPIM_PORT(cfg->NCSPort));
+ assert_param(IS_OSPIM_IO_PORT(cfg->IOLowPort));
+ assert_param(IS_OSPIM_IO_PORT(cfg->IOHighPort));
+ assert_param(IS_OSPIM_REQ2ACKTIME(cfg->Req2AckTime));
+
+ if (hospi->Instance == OCTOSPI1)
+ {
+ instance = 0U;
+ other_instance = 1U;
+ }
+ else
+ {
+ instance = 1U;
+ other_instance = 0U;
+ }
+
+ /**************** Get current configuration of the instances ****************/
+ for (index = 0U; index < OSPI_NB_INSTANCE; index++)
+ {
+ if (OSPIM_GetConfig(index+1U, &(IOM_cfg[index])) != HAL_OK)
+ {
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ }
+
+ if (status == HAL_OK)
+ {
+ /********** Disable both OctoSPI to configure OctoSPI IO Manager **********/
+ if ((OCTOSPI1->CR & OCTOSPI_CR_EN) != 0U)
+ {
+ CLEAR_BIT(OCTOSPI1->CR, OCTOSPI_CR_EN);
+ ospi_enabled |= 0x1U;
+ }
+ if ((OCTOSPI2->CR & OCTOSPI_CR_EN) != 0U)
+ {
+ CLEAR_BIT(OCTOSPI2->CR, OCTOSPI_CR_EN);
+ ospi_enabled |= 0x2U;
+ }
+
+ /***************** Deactivation of previous configuration *****************/
+ CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].NCSPort-1U)], OCTOSPIM_PCR_NCSEN);
+ if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) != 0U)
+ {
+ /* De-multiplexing should be performed */
+ CLEAR_BIT(OCTOSPIM->CR, OCTOSPIM_CR_MUXEN);
+
+ if (other_instance == 1U)
+ {
+ SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort-1U)], OCTOSPIM_PCR_CLKSRC);
+ if (IOM_cfg[other_instance].DQSPort != 0U)
+ {
+ SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort-1U)], OCTOSPIM_PCR_DQSSRC);
+ }
+ if (IOM_cfg[other_instance].IOLowPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLSRC_1);
+ }
+ if (IOM_cfg[other_instance].IOHighPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHSRC_1);
+ }
+ }
+ }
+ else
+ {
+ if (IOM_cfg[instance].ClkPort != 0U)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].ClkPort-1U)], OCTOSPIM_PCR_CLKEN);
+ if (IOM_cfg[instance].DQSPort != 0U)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].DQSPort-1U)], OCTOSPIM_PCR_DQSEN);
+ }
+ if (IOM_cfg[instance].IOLowPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLEN);
+ }
+ if (IOM_cfg[instance].IOHighPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHEN);
+ }
+ }
+ }
+
+ /********************* Deactivation of other instance *********************/
+ if ((cfg->ClkPort == IOM_cfg[other_instance].ClkPort) || (cfg->DQSPort == IOM_cfg[other_instance].DQSPort) ||
+ (cfg->NCSPort == IOM_cfg[other_instance].NCSPort) || (cfg->IOLowPort == IOM_cfg[other_instance].IOLowPort) ||
+ (cfg->IOHighPort == IOM_cfg[other_instance].IOHighPort))
+ {
+ if ((cfg->ClkPort == IOM_cfg[other_instance].ClkPort) &&
+ (cfg->DQSPort == IOM_cfg[other_instance].DQSPort) &&
+ (cfg->IOLowPort == IOM_cfg[other_instance].IOLowPort) &&
+ (cfg->IOHighPort == IOM_cfg[other_instance].IOHighPort))
+ {
+ /* Multiplexing should be performed */
+ SET_BIT(OCTOSPIM->CR, OCTOSPIM_CR_MUXEN);
+ }
+ else
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort-1U)], OCTOSPIM_PCR_CLKEN);
+ if (IOM_cfg[other_instance].DQSPort != 0U)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort-1U)], OCTOSPIM_PCR_DQSEN);
+ }
+ CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].NCSPort-1U)], OCTOSPIM_PCR_NCSEN);
+ if (IOM_cfg[other_instance].IOLowPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
+ OCTOSPIM_PCR_IOLEN);
+ }
+ if (IOM_cfg[other_instance].IOHighPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
+ OCTOSPIM_PCR_IOHEN);
+ }
+ }
+ }
+
+ /******************** Activation of new configuration *********************/
+ MODIFY_REG(OCTOSPIM->PCR[(cfg->NCSPort - 1U)], (OCTOSPIM_PCR_NCSEN | OCTOSPIM_PCR_NCSSRC),
+ (OCTOSPIM_PCR_NCSEN | (instance << OCTOSPIM_PCR_NCSSRC_Pos)));
+
+ if ((cfg->Req2AckTime - 1U) > ((OCTOSPIM->CR & OCTOSPIM_CR_REQ2ACK_TIME) >> OCTOSPIM_CR_REQ2ACK_TIME_Pos))
+ {
+ MODIFY_REG(OCTOSPIM->CR, OCTOSPIM_CR_REQ2ACK_TIME, ((cfg->Req2AckTime - 1U) << OCTOSPIM_CR_REQ2ACK_TIME_Pos));
+ }
+
+ if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort-1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC), OCTOSPIM_PCR_CLKEN);
+ if (cfg->DQSPort != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort-1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC), OCTOSPIM_PCR_DQSEN);
+ }
+
+ if ((cfg->IOLowPort & OCTOSPIM_PCR_IOLEN) != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), OCTOSPIM_PCR_IOLEN);
+ }
+ else if (cfg->IOLowPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), OCTOSPIM_PCR_IOHEN);
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ if ((cfg->IOHighPort & OCTOSPIM_PCR_IOLEN) != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0));
+ }
+ else if (cfg->IOHighPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0));
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+ else
+ {
+ MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort-1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC),
+ (OCTOSPIM_PCR_CLKEN | (instance << OCTOSPIM_PCR_CLKSRC_Pos)));
+ if (cfg->DQSPort != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort-1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC),
+ (OCTOSPIM_PCR_DQSEN | (instance << OCTOSPIM_PCR_DQSSRC_Pos)));
+ }
+
+ if ((cfg->IOLowPort & OCTOSPIM_PCR_IOLEN) != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC),
+ (OCTOSPIM_PCR_IOLEN | (instance << (OCTOSPIM_PCR_IOLSRC_Pos+1U))));
+ }
+ else if (cfg->IOLowPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC),
+ (OCTOSPIM_PCR_IOHEN | (instance << (OCTOSPIM_PCR_IOHSRC_Pos+1U))));
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ if ((cfg->IOHighPort & OCTOSPIM_PCR_IOLEN) != 0U)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC),
+ (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0 | (instance << (OCTOSPIM_PCR_IOLSRC_Pos+1U))));
+ }
+ else if (cfg->IOHighPort != HAL_OSPIM_IOPORT_NONE)
+ {
+ MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)],
+ (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC),
+ (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0 | (instance << (OCTOSPIM_PCR_IOHSRC_Pos+1U))));
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+
+ /******* Re-enable both OctoSPI after configure OctoSPI IO Manager ********/
+ if ((ospi_enabled & 0x1U) != 0U)
+ {
+ SET_BIT(OCTOSPI1->CR, OCTOSPI_CR_EN);
+ }
+ if ((ospi_enabled & 0x2U) != 0U)
+ {
+ SET_BIT(OCTOSPI2->CR, OCTOSPI_CR_EN);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ @cond 0
+ */
+/**
+ * @brief DMA OSPI process complete callback.
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void OSPI_DMACplt(MDMA_HandleTypeDef *hmdma)
+{
+ OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hmdma->Parent);
+ hospi->XferCount = 0;
+
+ /* Disable the DMA transfer on the OctoSPI side */
+ CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ __HAL_MDMA_DISABLE(hmdma);
+
+ /* Enable the OSPI transfer complete Interrupt */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC);
+}
+
+/**
+ * @brief DMA OSPI communication error callback.
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void OSPI_DMAError(MDMA_HandleTypeDef *hmdma)
+{
+ OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hmdma->Parent);
+ hospi->XferCount = 0;
+ hospi->ErrorCode = HAL_OSPI_ERROR_DMA;
+
+ /* Disable the DMA transfer on the OctoSPI side */
+ CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN);
+
+ /* Abort the OctoSPI */
+ if (HAL_OSPI_Abort_IT(hospi) != HAL_OK)
+ {
+ /* Disable the interrupts */
+ __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE);
+
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Error callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->ErrorCallback(hospi);
+#else
+ HAL_OSPI_ErrorCallback(hospi);
+#endif /*(USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+}
+
+/**
+ * @brief DMA OSPI abort complete callback.
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void OSPI_DMAAbortCplt(MDMA_HandleTypeDef *hmdma)
+{
+ OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hmdma->Parent);
+ hospi->XferCount = 0;
+
+ /* Check the state */
+ if (hospi->State == HAL_OSPI_STATE_ABORT)
+ {
+ /* DMA abort called by OctoSPI abort */
+ if (__HAL_OSPI_GET_FLAG(hospi, HAL_OSPI_FLAG_BUSY) != RESET)
+ {
+ /* Clear transfer complete flag */
+ __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC);
+
+ /* Enable the transfer complete interrupts */
+ __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC);
+
+ /* Perform an abort of the OctoSPI */
+ SET_BIT(hospi->Instance->CR, OCTOSPI_CR_ABORT);
+ }
+ else
+ {
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Abort callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->AbortCpltCallback(hospi);
+#else
+ HAL_OSPI_AbortCpltCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */
+ }
+ }
+ else
+ {
+ /* DMA abort called due to a transfer error interrupt */
+ /* Update state */
+ hospi->State = HAL_OSPI_STATE_READY;
+
+ /* Error callback */
+#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)
+ hospi->ErrorCallback(hospi);
+#else
+ HAL_OSPI_ErrorCallback(hospi);
+#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/
+ }
+}
+
+/**
+ * @brief Wait for a flag state until timeout.
+ * @param hospi : OSPI handle
+ * @param Flag : Flag checked
+ * @param State : Value of the flag expected
+ * @param Timeout : Duration of the timeout
+ * @param Tickstart : Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef OSPI_WaitFlagStateUntilTimeout(OSPI_HandleTypeDef *hospi, uint32_t Flag,
+ FlagStatus State, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is in expected state */
+ while((__HAL_OSPI_GET_FLAG(hospi, Flag)) != State)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if(((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+ {
+ hospi->State = HAL_OSPI_STATE_ERROR;
+ hospi->ErrorCode |= HAL_OSPI_ERROR_TIMEOUT;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the registers for the regular command mode.
+ * @param hospi : OSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef OSPI_ConfigCmd(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ __IO uint32_t *ccr_reg;
+ __IO uint32_t *tcr_reg;
+ __IO uint32_t *ir_reg;
+ __IO uint32_t *abr_reg;
+
+ /* Re-initialize the value of the functional mode */
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, 0U);
+
+ /* Configure the flash ID */
+ if (hospi->Init.DualQuad == HAL_OSPI_DUALQUAD_DISABLE)
+ {
+ MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FSEL, cmd->FlashId);
+ }
+
+ if (cmd->OperationType == HAL_OSPI_OPTYPE_WRITE_CFG)
+ {
+ ccr_reg = &(hospi->Instance->WCCR);
+ tcr_reg = &(hospi->Instance->WTCR);
+ ir_reg = &(hospi->Instance->WIR);
+ abr_reg = &(hospi->Instance->WABR);
+ }
+ else if (cmd->OperationType == HAL_OSPI_OPTYPE_WRAP_CFG)
+ {
+ ccr_reg = &(hospi->Instance->WPCCR);
+ tcr_reg = &(hospi->Instance->WPTCR);
+ ir_reg = &(hospi->Instance->WPIR);
+ abr_reg = &(hospi->Instance->WPABR);
+ }
+ else
+ {
+ ccr_reg = &(hospi->Instance->CCR);
+ tcr_reg = &(hospi->Instance->TCR);
+ ir_reg = &(hospi->Instance->IR);
+ abr_reg = &(hospi->Instance->ABR);
+ }
+
+ /* Configure the CCR register with DQS and SIOO modes */
+ *ccr_reg = (cmd->DQSMode | cmd->SIOOMode);
+
+ if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE)
+ {
+ /* Configure the ABR register with alternate bytes value */
+ *abr_reg = cmd->AlternateBytes;
+
+ /* Configure the CCR register with alternate bytes communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ABMODE | OCTOSPI_CCR_ABDTR | OCTOSPI_CCR_ABSIZE),
+ (cmd->AlternateBytesMode | cmd->AlternateBytesDtrMode | cmd->AlternateBytesSize));
+ }
+
+ /* Configure the TCR register with the number of dummy cycles */
+ MODIFY_REG((*tcr_reg), OCTOSPI_TCR_DCYC, cmd->DummyCycles);
+
+ if (cmd->DataMode != HAL_OSPI_DATA_NONE)
+ {
+ if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG)
+ {
+ /* Configure the DLR register with the number of data */
+ hospi->Instance->DLR = (cmd->NbData - 1U);
+ }
+ }
+
+ if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE)
+ {
+ if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE)
+ {
+ if (cmd->DataMode != HAL_OSPI_DATA_NONE)
+ {
+ /* ---- Command with instruction, address and data ---- */
+
+ /* Configure the CCR register with all communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE |
+ OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE |
+ OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR),
+ (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
+ cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize |
+ cmd->DataMode | cmd->DataDtrMode));
+ }
+ else
+ {
+ /* ---- Command with instruction and address ---- */
+
+ /* Configure the CCR register with all communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE |
+ OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE),
+ (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
+ cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize));
+
+ /* The DHQC bit is linked with DDTR bit which should be activated */
+ if ((hospi->Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) &&
+ (cmd->InstructionDtrMode == HAL_OSPI_INSTRUCTION_DTR_ENABLE))
+ {
+ MODIFY_REG((*ccr_reg), OCTOSPI_CCR_DDTR, HAL_OSPI_DATA_DTR_ENABLE);
+ }
+ }
+
+ /* Configure the IR register with the instruction value */
+ *ir_reg = cmd->Instruction;
+
+ /* Configure the AR register with the address value */
+ hospi->Instance->AR = cmd->Address;
+ }
+ else
+ {
+ if (cmd->DataMode != HAL_OSPI_DATA_NONE)
+ {
+ /* ---- Command with instruction and data ---- */
+
+ /* Configure the CCR register with all communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE |
+ OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR),
+ (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize |
+ cmd->DataMode | cmd->DataDtrMode));
+ }
+ else
+ {
+ /* ---- Command with only instruction ---- */
+
+ /* Configure the CCR register with all communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE),
+ (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize));
+
+ /* The DHQC bit is linked with DDTR bit which should be activated */
+ if ((hospi->Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) &&
+ (cmd->InstructionDtrMode == HAL_OSPI_INSTRUCTION_DTR_ENABLE))
+ {
+ MODIFY_REG((*ccr_reg), OCTOSPI_CCR_DDTR, HAL_OSPI_DATA_DTR_ENABLE);
+ }
+ }
+
+ /* Configure the IR register with the instruction value */
+ *ir_reg = cmd->Instruction;
+
+ }
+ }
+ else
+ {
+ if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE)
+ {
+ if (cmd->DataMode != HAL_OSPI_DATA_NONE)
+ {
+ /* ---- Command with address and data ---- */
+
+ /* Configure the CCR register with all communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE |
+ OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR),
+ (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize |
+ cmd->DataMode | cmd->DataDtrMode));
+ }
+ else
+ {
+ /* ---- Command with only address ---- */
+
+ /* Configure the CCR register with all communication parameters */
+ MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE),
+ (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize));
+ }
+
+ /* Configure the AR register with the instruction value */
+ hospi->Instance->AR = cmd->Address;
+ }
+ else
+ {
+ /* ---- Invalid command configuration (no instruction, no address) ---- */
+ status = HAL_ERROR;
+ hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM;
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Get the current IOM configuration for an OctoSPI instance.
+ * @param instance_nb : number of the instance
+ * @param cfg : configuration of the IO Manager for the instance
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef OSPIM_GetConfig(uint8_t instance_nb, OSPIM_CfgTypeDef *cfg)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t reg;
+ uint32_t value = 0U;
+ uint32_t index;
+
+ if ((instance_nb == 0U) || (instance_nb > OSPI_NB_INSTANCE) || (cfg == NULL))
+ {
+ /* Invalid parameter -> error returned */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Initialize the structure */
+ cfg->ClkPort = 0U;
+ cfg->DQSPort = 0U;
+ cfg->NCSPort = 0U;
+ cfg->IOLowPort = 0U;
+ cfg->IOHighPort = 0U;
+
+ if (instance_nb == 2U)
+ {
+ if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) == 0U)
+ {
+ value = (OCTOSPIM_PCR_CLKSRC | OCTOSPIM_PCR_DQSSRC | OCTOSPIM_PCR_NCSSRC
+ | OCTOSPIM_PCR_IOLSRC_1 | OCTOSPIM_PCR_IOHSRC_1);
+ }
+ else
+ {
+ value = OCTOSPIM_PCR_NCSSRC;
+ }
+ }
+
+ /* Get the information about the instance */
+ for (index = 0U; index < OSPI_IOM_NB_PORTS; index ++)
+ {
+ reg = OCTOSPIM->PCR[index];
+
+ if ((reg & OCTOSPIM_PCR_CLKEN) != 0U)
+ {
+ /* The clock is enabled on this port */
+ if ((reg & OCTOSPIM_PCR_CLKSRC) == (value & OCTOSPIM_PCR_CLKSRC))
+ {
+ /* The clock correspond to the instance passed as parameter */
+ cfg->ClkPort = index+1U;
+ }
+ }
+
+ if ((reg & OCTOSPIM_PCR_DQSEN) != 0U)
+ {
+ /* The DQS is enabled on this port */
+ if ((reg & OCTOSPIM_PCR_DQSSRC) == (value & OCTOSPIM_PCR_DQSSRC))
+ {
+ /* The DQS correspond to the instance passed as parameter */
+ cfg->DQSPort = index+1U;
+ }
+ }
+
+ if ((reg & OCTOSPIM_PCR_NCSEN) != 0U)
+ {
+ /* The nCS is enabled on this port */
+ if ((reg & OCTOSPIM_PCR_NCSSRC) == (value & OCTOSPIM_PCR_NCSSRC))
+ {
+ /* The nCS correspond to the instance passed as parameter */
+ cfg->NCSPort = index+1U;
+ }
+ }
+
+ if ((reg & OCTOSPIM_PCR_IOLEN) != 0U)
+ {
+ /* The IO Low is enabled on this port */
+ if ((reg & OCTOSPIM_PCR_IOLSRC_1) == (value & OCTOSPIM_PCR_IOLSRC_1))
+ {
+ /* The IO Low correspond to the instance passed as parameter */
+ if ((reg & OCTOSPIM_PCR_IOLSRC_0) == 0U)
+ {
+ cfg->IOLowPort = (OCTOSPIM_PCR_IOLEN | (index+1U));
+ }
+ else
+ {
+ cfg->IOLowPort = (OCTOSPIM_PCR_IOHEN | (index+1U));
+ }
+ }
+ }
+
+ if ((reg & OCTOSPIM_PCR_IOHEN) != 0U)
+ {
+ /* The IO High is enabled on this port */
+ if ((reg & OCTOSPIM_PCR_IOHSRC_1) == (value & OCTOSPIM_PCR_IOHSRC_1))
+ {
+ /* The IO High correspond to the instance passed as parameter */
+ if ((reg & OCTOSPIM_PCR_IOHSRC_0) == 0U)
+ {
+ cfg->IOHighPort = (OCTOSPIM_PCR_IOLEN | (index+1U));
+ }
+ else
+ {
+ cfg->IOHighPort = (OCTOSPIM_PCR_IOHEN | (index+1U));
+ }
+ }
+ }
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ @endcond
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* OCTOSPI || OCTOSPI1 || OCTOSPI2 */
|