diff options
| author | joshua <joshua@joshuayun.com> | 2023-12-30 23:54:31 -0500 |
|---|---|---|
| committer | joshua <joshua@joshuayun.com> | 2023-12-30 23:54:31 -0500 |
| commit | 86608c6770cf08c138a2bdab5855072f64be09ef (patch) | |
| tree | 494a61b3ef37e76f9235a0d10f5c93d97290a35f /Core/Inc | |
| download | sdr-software-master.tar.gz | |
Diffstat (limited to 'Core/Inc')
| -rw-r--r-- | Core/Inc/AD9851.h | 5 | ||||
| -rw-r--r-- | Core/Inc/Si5351A-RevB-Registers.h | 265 | ||||
| -rw-r--r-- | Core/Inc/main.h | 107 | ||||
| -rw-r--r-- | Core/Inc/stm32h7xx_hal_conf.h | 515 | ||||
| -rw-r--r-- | Core/Inc/stm32h7xx_it.h | 69 |
5 files changed, 961 insertions, 0 deletions
diff --git a/Core/Inc/AD9851.h b/Core/Inc/AD9851.h new file mode 100644 index 0000000..7d80e32 --- /dev/null +++ b/Core/Inc/AD9851.h @@ -0,0 +1,5 @@ +#include "main.h"
+
+void AD9851_reset(void);
+
+void AD9851_parallel(uint32_t freq);
\ No newline at end of file diff --git a/Core/Inc/Si5351A-RevB-Registers.h b/Core/Inc/Si5351A-RevB-Registers.h new file mode 100644 index 0000000..5ee3d06 --- /dev/null +++ b/Core/Inc/Si5351A-RevB-Registers.h @@ -0,0 +1,265 @@ +/*
+ * Si5351A Rev B Configuration Register Export Header File
+ *
+ * This file represents a series of Skyworks Si5351A Rev B
+ * register writes that can be performed to load a single configuration
+ * on a device. It was created by a Skyworks ClockBuilder Pro
+ * export tool.
+ *
+ * Part: Si5351A Rev B
+ * Design ID:
+ * Includes Pre/Post Download Control Register Writes: Yes
+ * Created By: ClockBuilder Pro v4.11.0.1 [2023-09-14]
+ * Timestamp: 2023-12-05 04:14:31 GMT-06:00
+ *
+ * A complete design report corresponding to this export is included at the end
+ * of this header file.
+ *
+ */
+
+#ifndef SI5351A_REVB_REG_CONFIG_HEADER
+#define SI5351A_REVB_REG_CONFIG_HEADER
+
+#define SI5351A_REVB_REG_CONFIG_NUM_REGS 61
+
+typedef struct
+{
+ uint8_t address; /* 16-bit register address */
+ uint8_t value; /* 8-bit register data */
+
+} si5351a_revb_register_t;
+
+si5351a_revb_register_t const si5351a_revb_registers[SI5351A_REVB_REG_CONFIG_NUM_REGS] =
+{
+ { 0x02, 0x53 },
+ { 0x03, 0x00 },
+ { 0x04, 0x20 },
+ { 0x07, 0x00 },
+ { 0x0F, 0x00 },
+ { 0x10, 0x0F },
+ { 0x11, 0x0F },
+ { 0x12, 0x0F },
+ { 0x13, 0x8C },
+ { 0x14, 0x8C },
+ { 0x15, 0x8C },
+ { 0x16, 0x8C },
+ { 0x17, 0x8C },
+ { 0x1A, 0x00 },
+ { 0x1B, 0x01 },
+ { 0x1C, 0x00 },
+ { 0x1D, 0x10 },
+ { 0x1E, 0x00 },
+ { 0x1F, 0x00 },
+ { 0x20, 0x00 },
+ { 0x21, 0x00 },
+ { 0x2A, 0x00 },
+ { 0x2B, 0x01 },
+ { 0x2C, 0x00 },
+ { 0x2D, 0x0D },
+ { 0x2E, 0x00 },
+ { 0x2F, 0x00 },
+ { 0x30, 0x00 },
+ { 0x31, 0x00 },
+ { 0x32, 0x00 },
+ { 0x33, 0x04 },
+ { 0x34, 0x62 },
+ { 0x35, 0xBD },
+ { 0x36, 0x20 },
+ { 0x37, 0x00 },
+ { 0x38, 0x00 },
+ { 0x39, 0x00 },
+ { 0x3A, 0x00 },
+ { 0x3B, 0x04 },
+ { 0x3C, 0x62 },
+ { 0x3D, 0xBD },
+ { 0x3E, 0x20 },
+ { 0x3F, 0x00 },
+ { 0x40, 0x00 },
+ { 0x41, 0x00 },
+ { 0x5A, 0x00 },
+ { 0x5B, 0x00 },
+ { 0x95, 0x00 },
+ { 0x96, 0x00 },
+ { 0x97, 0x00 },
+ { 0x98, 0x00 },
+ { 0x99, 0x00 },
+ { 0x9A, 0x00 },
+ { 0x9B, 0x00 },
+ { 0xA2, 0x00 },
+ { 0xA3, 0x00 },
+ { 0xA4, 0x00 },
+ { 0xA5, 0x00 },
+ { 0xA6, 0x00 },
+ { 0xA7, 0x00 },
+ { 0xB7, 0xD2 },
+
+};
+
+/*
+ * Design Report
+ *
+ * Overview
+ * ========
+ *
+ * Part: Si5351A
+ * Project File: C:\Users\ldu08\Downloads\Si5351A-RevB-Project.slabtimeproj
+ * Created By: ClockBuilder Pro v4.11.0.1 [2023-09-14]
+ * Timestamp: 2023-12-05 04:14:31 GMT-06:00
+ *
+ * Design Rule Check
+ * =================
+ *
+ * Errors:
+ * - No errors
+ *
+ * Warnings:
+ * - No warnings
+ *
+ * Design
+ * ======
+ * I2C Address: 0x60
+ *
+ * Inputs:
+ * IN0: 25 MHz
+ *
+ * Outputs:
+ * OUT0: 30 MHz
+ * Enabled LVCMOS 8 mA
+ * Offset 0.000 s
+ * OUT1: 10 kHz
+ * Enabled LVCMOS 8 mA
+ * Offset 0.000 s
+ * OUT2: 10 kHz
+ * Enabled LVCMOS 8 mA
+ * Offset 0.000 s
+ *
+ * Frequency Plan
+ * ==============
+ *
+ * PLL_A:
+ * Enabled Features = None
+ * Fvco = 900 MHz
+ * M = 36
+ * Input0:
+ * Source = Crystal
+ * Source Frequency = 25 MHz
+ * Fpfd = 25 MHz
+ * Load Capacitance = Load_10pF
+ * Output0:
+ * Features = None
+ * Disabled State = StopLow
+ * R = 1 (2^0)
+ * Fout = 30 MHz
+ * N = 30
+ * Output1:
+ * Features = None
+ * Disabled State = StopLow
+ * R = 64 (2^6)
+ * Fout = 10 kHz
+ * N = 1406.25
+ * Output2:
+ * Features = None
+ * Disabled State = StopLow
+ * R = 64 (2^6)
+ * Fout = 10 kHz
+ * N = 1406.25
+ *
+ * Settings
+ * ========
+ *
+ * Location Setting Name Decimal Value Hex Value
+ * ------------ -------------- ----------------- -----------------
+ * 0x0002[3] XO_LOS_MASK 0 0x0
+ * 0x0002[4] CLK_LOS_MASK 1 0x1
+ * 0x0002[5] LOL_A_MASK 0 0x0
+ * 0x0002[6] LOL_B_MASK 1 0x1
+ * 0x0002[7] SYS_INIT_MASK 0 0x0
+ * 0x0003[7:0] CLK_OEB 0 0x00
+ * 0x0004[4] DIS_RESET_LOLA 0 0x0
+ * 0x0004[5] DIS_RESET_LOLB 1 0x1
+ * 0x0007[7:4] I2C_ADDR_CTRL 0 0x0
+ * 0x000F[2] PLLA_SRC 0 0x0
+ * 0x000F[3] PLLB_SRC 0 0x0
+ * 0x000F[4] PLLA_INSELB 0 0x0
+ * 0x000F[5] PLLB_INSELB 0 0x0
+ * 0x000F[7:6] CLKIN_DIV 0 0x0
+ * 0x0010[1:0] CLK0_IDRV 3 0x3
+ * 0x0010[3:2] CLK0_SRC 3 0x3
+ * 0x0010[4] CLK0_INV 0 0x0
+ * 0x0010[5] MS0_SRC 0 0x0
+ * 0x0010[6] MS0_INT 0 0x0
+ * 0x0010[7] CLK0_PDN 0 0x0
+ * 0x0011[1:0] CLK1_IDRV 3 0x3
+ * 0x0011[3:2] CLK1_SRC 3 0x3
+ * 0x0011[4] CLK1_INV 0 0x0
+ * 0x0011[5] MS1_SRC 0 0x0
+ * 0x0011[6] MS1_INT 0 0x0
+ * 0x0011[7] CLK1_PDN 0 0x0
+ * 0x0012[1:0] CLK2_IDRV 3 0x3
+ * 0x0012[3:2] CLK2_SRC 3 0x3
+ * 0x0012[4] CLK2_INV 0 0x0
+ * 0x0012[5] MS2_SRC 0 0x0
+ * 0x0012[6] MS2_INT 0 0x0
+ * 0x0012[7] CLK2_PDN 0 0x0
+ * 0x0013[1:0] CLK3_IDRV 0 0x0
+ * 0x0013[3:2] CLK3_SRC 3 0x3
+ * 0x0013[4] CLK3_INV 0 0x0
+ * 0x0013[5] MS3_SRC 0 0x0
+ * 0x0013[6] MS3_INT 0 0x0
+ * 0x0013[7] CLK3_PDN 1 0x1
+ * 0x0014[1:0] CLK4_IDRV 0 0x0
+ * 0x0014[3:2] CLK4_SRC 3 0x3
+ * 0x0014[4] CLK4_INV 0 0x0
+ * 0x0014[5] MS4_SRC 0 0x0
+ * 0x0014[6] MS4_INT 0 0x0
+ * 0x0014[7] CLK4_PDN 1 0x1
+ * 0x0015[1:0] CLK5_IDRV 0 0x0
+ * 0x0015[3:2] CLK5_SRC 3 0x3
+ * 0x0015[4] CLK5_INV 0 0x0
+ * 0x0015[5] MS5_SRC 0 0x0
+ * 0x0015[6] MS5_INT 0 0x0
+ * 0x0015[7] CLK5_PDN 1 0x1
+ * 0x0016[1:0] CLK6_IDRV 0 0x0
+ * 0x0016[3:2] CLK6_SRC 3 0x3
+ * 0x0016[4] CLK6_INV 0 0x0
+ * 0x0016[5] MS6_SRC 0 0x0
+ * 0x0016[6] FBA_INT 0 0x0
+ * 0x0016[7] CLK6_PDN 1 0x1
+ * 0x0017[1:0] CLK7_IDRV 0 0x0
+ * 0x0017[3:2] CLK7_SRC 3 0x3
+ * 0x0017[4] CLK7_INV 0 0x0
+ * 0x0017[5] MS7_SRC 0 0x0
+ * 0x0017[6] FBB_INT 0 0x0
+ * 0x0017[7] CLK7_PDN 1 0x1
+ * 0x001C[17:0] MSNA_P1 4096 0x01000
+ * 0x001F[19:0] MSNA_P2 0 0x00000
+ * 0x001F[23:4] MSNA_P3 1 0x00001
+ * 0x002C[17:0] MS0_P1 3328 0x00D00
+ * 0x002F[19:0] MS0_P2 0 0x00000
+ * 0x002F[23:4] MS0_P4 1 0x00001
+ * 0x0034[17:0] MS1_P1 179488 0x2BD20
+ * 0x0034[6:4] R1_DIV 6 0x6
+ * 0x0037[19:0] MS1_P2 0 0x00000
+ * 0x0037[23:4] MS1_P4 4 0x00004
+ * 0x003C[17:0] MS2_P1 179488 0x2BD20
+ * 0x003C[6:4] R2_DIV 6 0x6
+ * 0x003F[19:0] MS2_P2 0 0x00000
+ * 0x003F[23:4] MS2_P4 4 0x00004
+ * 0x005A[7:0] MS6_P2 0 0x00
+ * 0x005B[7:0] MS7_P2 0 0x00
+ * 0x0095[14:0] SSDN_P2 0 0x0000
+ * 0x0095[7] SSC_EN 0 0x0
+ * 0x0097[14:0] SSDN_P3 0 0x0000
+ * 0x0097[7] SSC_MODE 0 0x0
+ * 0x0099[11:0] SSDN_P1 0 0x000
+ * 0x009A[15:4] SSUDP 0 0x000
+ * 0x00A2[21:0] VCXO_PARAM 0 0x000000
+ * 0x00A5[7:0] CLK0_PHOFF 0 0x00
+ * 0x00A6[7:0] CLK1_PHOFF 0 0x00
+ * 0x00A7[7:0] CLK2_PHOFF 0 0x00
+ * 0x00B7[7:6] XTAL_CL 3 0x3
+ *
+ *
+ */
+
+#endif
\ No newline at end of file diff --git a/Core/Inc/main.h b/Core/Inc/main.h new file mode 100644 index 0000000..979acea --- /dev/null +++ b/Core/Inc/main.h @@ -0,0 +1,107 @@ +/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.h
+ * @brief : Header for main.c file.
+ * This file contains the common defines of the application.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define FQ_UD_Pin GPIO_PIN_13
+#define FQ_UD_GPIO_Port GPIOC
+#define RESET_Pin GPIO_PIN_14
+#define RESET_GPIO_Port GPIOC
+#define W_CLK_Pin GPIO_PIN_15
+#define W_CLK_GPIO_Port GPIOC
+#define D7_Pin GPIO_PIN_8
+#define D7_GPIO_Port GPIOD
+#define D6_Pin GPIO_PIN_9
+#define D6_GPIO_Port GPIOD
+#define D5_Pin GPIO_PIN_10
+#define D5_GPIO_Port GPIOD
+#define D4_Pin GPIO_PIN_11
+#define D4_GPIO_Port GPIOD
+#define D3_Pin GPIO_PIN_12
+#define D3_GPIO_Port GPIOD
+#define D2_Pin GPIO_PIN_13
+#define D2_GPIO_Port GPIOD
+#define D1_Pin GPIO_PIN_14
+#define D1_GPIO_Port GPIOD
+#define D0_Pin GPIO_PIN_15
+#define D0_GPIO_Port GPIOD
+#define D13_Pin GPIO_PIN_11
+#define D13_GPIO_Port GPIOC
+#define D12_Pin GPIO_PIN_12
+#define D12_GPIO_Port GPIOC
+#define D11_Pin GPIO_PIN_0
+#define D11_GPIO_Port GPIOD
+#define D10_Pin GPIO_PIN_1
+#define D10_GPIO_Port GPIOD
+#define D14_Pin GPIO_PIN_2
+#define D14_GPIO_Port GPIOD
+#define D15_Pin GPIO_PIN_3
+#define D15_GPIO_Port GPIOD
+#define D16_Pin GPIO_PIN_4
+#define D16_GPIO_Port GPIOD
+#define D17_Pin GPIO_PIN_5
+#define D17_GPIO_Port GPIOD
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
diff --git a/Core/Inc/stm32h7xx_hal_conf.h b/Core/Inc/stm32h7xx_hal_conf.h new file mode 100644 index 0000000..8866b62 --- /dev/null +++ b/Core/Inc/stm32h7xx_hal_conf.h @@ -0,0 +1,515 @@ +/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_conf.h
+ * @author MCD Application Team
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CONF_H
+#define STM32H7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+
+ #define HAL_ADC_MODULE_ENABLED
+/* #define HAL_FDCAN_MODULE_ENABLED */
+/* #define HAL_FMAC_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_COMP_MODULE_ENABLED */
+/* #define HAL_CORDIC_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+#define HAL_DAC_MODULE_ENABLED
+/* #define HAL_DCMI_MODULE_ENABLED */
+/* #define HAL_DMA2D_MODULE_ENABLED */
+/* #define HAL_ETH_MODULE_ENABLED */
+/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_OTFDEC_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_HRTIM_MODULE_ENABLED */
+/* #define HAL_HSEM_MODULE_ENABLED */
+/* #define HAL_GFXMMU_MODULE_ENABLED */
+/* #define HAL_JPEG_MODULE_ENABLED */
+/* #define HAL_OPAMP_MODULE_ENABLED */
+/* #define HAL_OSPI_MODULE_ENABLED */
+/* #define HAL_OSPI_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_RAMECC_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+/* #define HAL_SWPMI_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_JPEG_MODULE_ENABLED */
+/* #define HAL_MDIOS_MODULE_ENABLED */
+/* #define HAL_PSSI_MODULE_ENABLED */
+/* #define HAL_DTS_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+#define HSE_VALUE (25000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal oscillator (CSI) default value.
+ * This value is the default CSI value after Reset.
+ */
+#if !defined (CSI_VALUE)
+ #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */
+#define USE_SPI_CRC 0U /*!< use CRC in SPI */
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
+#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
+#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */
+#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
+#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
+#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
+#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */
+#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */
+#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */
+#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
+#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
+#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
+#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
+#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
+#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
+#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */
+#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
+#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
+#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
+#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
+#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
+#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
+#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */
+#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
+#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
+#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
+#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+
+/* ########################### Ethernet Configuration ######################### */
+#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */
+#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */
+
+#define ETH_MAC_ADDR0 (0x02UL)
+#define ETH_MAC_ADDR1 (0x00UL)
+#define ETH_MAC_ADDR2 (0x00UL)
+#define ETH_MAC_ADDR3 (0x00UL)
+#define ETH_MAC_ADDR4 (0x00UL)
+#define ETH_MAC_ADDR5 (0x00UL)
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32h7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32h7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32h7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32h7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32h7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32h7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32h7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32h7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DTS_MODULE_ENABLED
+ #include "stm32h7xx_hal_dts.h"
+#endif /* HAL_DTS_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32h7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
+ #include "stm32h7xx_hal_eth_legacy.h"
+#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32h7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32h7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32h7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+ #include "stm32h7xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32h7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32h7xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORDIC_MODULE_ENABLED
+ #include "stm32h7xx_hal_cordic.h"
+#endif /* HAL_CORDIC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32h7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32h7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32h7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32h7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GFXMMU_MODULE_ENABLED
+ #include "stm32h7xx_hal_gfxmmu.h"
+#endif /* HAL_GFXMMU_MODULE_ENABLED */
+
+#ifdef HAL_FMAC_MODULE_ENABLED
+ #include "stm32h7xx_hal_fmac.h"
+#endif /* HAL_FMAC_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32h7xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+ #include "stm32h7xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32h7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32h7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32h7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32h7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32h7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32h7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32h7xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+#include "stm32h7xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PSSI_MODULE_ENABLED
+ #include "stm32h7xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32h7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RAMECC_MODULE_ENABLED
+ #include "stm32h7xx_hal_ramecc.h"
+#endif /* HAL_RAMECC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32h7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32h7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32h7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32h7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32h7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32h7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32h7xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32h7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32h7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32h7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32h7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32h7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32h7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t *file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CONF_H */
diff --git a/Core/Inc/stm32h7xx_it.h b/Core/Inc/stm32h7xx_it.h new file mode 100644 index 0000000..35e20ef --- /dev/null +++ b/Core/Inc/stm32h7xx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32h7xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_IT_H
+#define __STM32H7xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void DMA1_Stream0_IRQHandler(void);
+void DMA1_Stream1_IRQHandler(void);
+void DMA1_Stream2_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_IT_H */
|