diff options
Diffstat (limited to 'Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hash.c')
| -rw-r--r-- | Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hash.c | 3493 |
1 files changed, 3493 insertions, 0 deletions
diff --git a/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hash.c b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hash.c new file mode 100644 index 0000000..21136aa --- /dev/null +++ b/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hash.c @@ -0,0 +1,3493 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_hash.c
+ * @author MCD Application Team
+ * @brief HASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the HASH peripheral:
+ * + Initialization and de-initialization methods
+ * + HASH or HMAC processing in polling mode
+ * + HASH or HMAC processing in interrupt mode
+ * + HASH or HMAC processing in DMA mode
+ * + Peripheral State methods
+ * + HASH or HMAC processing suspension/resumption
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The HASH HAL driver can be used as follows:
+
+ (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+ (##) Enable the HASH interface clock using __HASH_CLK_ENABLE()
+ (##) When resorting to interrupt-based APIs (e.g. HAL_HASH_xxx_Start_IT())
+ (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler() API
+ (##) When resorting to DMA-based APIs (e.g. HAL_HASH_xxx_Start_DMA())
+ (+++) Enable the DMAx interface clock using
+ __DMAx_CLK_ENABLE()
+ (+++) Configure and enable one DMA stream to manage data transfer from
+ memory to peripheral (input stream). Managing data transfer from
+ peripheral to memory can be performed only using CPU.
+ (+++) Associate the initialized DMA handle to the HASH DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA stream: use
+ HAL_NVIC_SetPriority() and
+ HAL_NVIC_EnableIRQ()
+
+ (#)Initialize the HASH HAL using HAL_HASH_Init(). This function:
+ (##) resorts to HAL_HASH_MspInit() for low-level initialization,
+ (##) configures the data type: 1-bit, 8-bit, 16-bit or 32-bit.
+
+ (#)Three processing schemes are available:
+ (##) Polling mode: processing APIs are blocking functions
+ i.e. they process the data and wait till the digest computation is finished,
+ e.g. HAL_HASH_xxx_Start() for HASH or HAL_HMAC_xxx_Start() for HMAC
+ (##) Interrupt mode: processing APIs are not blocking functions
+ i.e. they process the data under interrupt,
+ e.g. HAL_HASH_xxx_Start_IT() for HASH or HAL_HMAC_xxx_Start_IT() for HMAC
+ (##) DMA mode: processing APIs are not blocking functions and the CPU is
+ not used for data transfer i.e. the data transfer is ensured by DMA,
+ e.g. HAL_HASH_xxx_Start_DMA() for HASH or HAL_HMAC_xxx_Start_DMA()
+ for HMAC. Note that in DMA mode, a call to HAL_HASH_xxx_Finish()
+ is then required to retrieve the digest.
+
+ (#)When the processing function is called after HAL_HASH_Init(), the HASH peripheral is
+ initialized and processes the buffer fed in input. When the input data have all been
+ fed to the Peripheral, the digest computation can start.
+
+ (#)Multi-buffer processing is possible in polling, interrupt and DMA modes.
+ (##) In polling mode, only multi-buffer HASH processing is possible.
+ API HAL_HASH_xxx_Accumulate() must be called for each input buffer, except for the last one.
+ User must resort to HAL_HASH_xxx_Accumulate_End() to enter the last one and retrieve as
+ well the computed digest.
+
+ (##) In interrupt mode, API HAL_HASH_xxx_Accumulate_IT() must be called for each input buffer,
+ except for the last one.
+ User must resort to HAL_HASH_xxx_Accumulate_End_IT() to enter the last one and retrieve as
+ well the computed digest.
+
+ (##) In DMA mode, multi-buffer HASH and HMAC processing are possible.
+ (+++) HASH processing: once initialization is done, MDMAT bit must be set
+ through __HAL_HASH_SET_MDMAT() macro.
+ From that point, each buffer can be fed to the Peripheral through HAL_HASH_xxx_Start_DMA() API.
+ Before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT()
+ macro then wrap-up the HASH processing in feeding the last input buffer through the
+ same API HAL_HASH_xxx_Start_DMA(). The digest can then be retrieved with a call to
+ API HAL_HASH_xxx_Finish().
+ (+++) HMAC processing (requires to resort to extended functions):
+ after initialization, the key and the first input buffer are entered
+ in the Peripheral with the API HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and
+ starts step 2.
+ The following buffers are next entered with the API HAL_HMACEx_xxx_Step2_DMA(). At this
+ point, the HMAC processing is still carrying out step 2.
+ Then, step 2 for the last input buffer and step 3 are carried out by a single call
+ to HAL_HMACEx_xxx_Step2_3_DMA().
+
+ The digest can finally be retrieved with a call to API HAL_HASH_xxx_Finish().
+
+
+ (#)Context swapping.
+ (##) Two APIs are available to suspend HASH or HMAC processing:
+ (+++) HAL_HASH_SwFeed_ProcessSuspend() when data are entered by software (polling or IT mode),
+ (+++) HAL_HASH_DMAFeed_ProcessSuspend() when data are entered by DMA.
+
+ (##) When HASH or HMAC processing is suspended, HAL_HASH_ContextSaving() allows
+ to save in memory the Peripheral context. This context can be restored afterwards
+ to resume the HASH processing thanks to HAL_HASH_ContextRestoring().
+
+ (##) Once the HASH Peripheral has been restored to the same configuration as that at suspension
+ time, processing can be restarted with the same API call (same API, same handle,
+ same parameters) as done before the suspension. Relevant parameters to restart at
+ the proper location are internally saved in the HASH handle.
+
+ (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+ *** Remarks on message length ***
+ ===================================
+ [..]
+ (#) HAL in interruption mode (interruptions driven)
+
+ (##)Due to HASH peripheral hardware design, the peripheral interruption is triggered every 64 bytes.
+ This is why, for driver implementation simplicity’s sake, user is requested to enter a message the
+ length of which is a multiple of 4 bytes.
+
+ (##) When the message length (in bytes) is not a multiple of words, a specific field exists in HASH_STR
+ to specify which bits to discard at the end of the complete message to process only the message bits
+ and not extra bits.
+
+ (##) If user needs to perform a hash computation of a large input buffer that is spread around various places
+ in memory and where each piece of this input buffer is not necessarily a multiple of 4 bytes in size, it becomes
+ necessary to use a temporary buffer to format the data accordingly before feeding them to the Peripheral.
+ It is advised to the user to
+ (+++) achieve the first formatting operation by software then enter the data
+ (+++) while the Peripheral is processing the first input set, carry out the second formatting
+ operation by software, to be ready when DINIS occurs.
+ (+++) repeat step 2 until the whole message is processed.
+
+ [..]
+ (#) HAL in DMA mode
+
+ (##) Again, due to hardware design, the DMA transfer to feed the data can only be done on a word-basis.
+ The same field described above in HASH_STR is used to specify which bits to discard at the end of the
+ DMA transfer to process only the message bits and not extra bits. Due to hardware implementation,
+ this is possible only at the end of the complete message. When several DMA transfers are needed to
+ enter the message, this is not applicable at the end of the intermediary transfers.
+
+ (##) Similarly to the interruption-driven mode, it is suggested to the user to format the consecutive
+ chunks of data by software while the DMA transfer and processing is on-going for the first parts of
+ the message. Due to the 32-bit alignment required for the DMA transfer, it is underlined that the
+ software formatting operation is more complex than in the IT mode.
+
+ *** Callback registration ***
+ ===================================
+ [..]
+ (#) The compilation define USE_HAL_HASH_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+ Use function HAL_HASH_RegisterCallback() to register a user callback.
+
+ (#) Function HAL_HASH_RegisterCallback() allows to register following callbacks:
+ (+) InCpltCallback : callback for input completion.
+ (+) DgstCpltCallback : callback for digest computation completion.
+ (+) ErrorCallback : callback for error.
+ (+) MspInitCallback : HASH MspInit.
+ (+) MspDeInitCallback : HASH MspDeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ (#) Use function HAL_HASH_UnRegisterCallback() to reset a callback to the default
+ weak (surcharged) function.
+ HAL_HASH_UnRegisterCallback() takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+ This function allows to reset following callbacks:
+ (+) InCpltCallback : callback for input completion.
+ (+) DgstCpltCallback : callback for digest computation completion.
+ (+) ErrorCallback : callback for error.
+ (+) MspInitCallback : HASH MspInit.
+ (+) MspDeInitCallback : HASH MspDeInit.
+
+ (#) By default, after the HAL_HASH_Init and if the state is HAL_HASH_STATE_RESET
+ all callbacks are reset to the corresponding legacy weak (surcharged) functions:
+ examples HAL_HASH_InCpltCallback(), HAL_HASH_DgstCpltCallback()
+ Exception done for MspInit and MspDeInit callbacks that are respectively
+ reset to the legacy weak (surcharged) functions in the HAL_HASH_Init
+ and HAL_HASH_DeInit only when these callbacks are null (not registered beforehand)
+ If not, MspInit or MspDeInit are not null, the HAL_HASH_Init and HAL_HASH_DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
+
+ Callbacks can be registered/unregistered in READY state only.
+ Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
+ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
+ during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using HAL_HASH_RegisterCallback before calling HAL_HASH_DeInit
+ or HAL_HASH_Init function.
+
+ When The compilation define USE_HAL_HASH_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ @endverbatim
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+#if defined (HASH)
+
+/** @defgroup HASH HASH
+ * @brief HASH HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup HASH_Private_Constants HASH Private Constants
+ * @{
+ */
+
+/** @defgroup HASH_Digest_Calculation_Status HASH Digest Calculation Status
+ * @{
+ */
+#define HASH_DIGEST_CALCULATION_NOT_STARTED ((uint32_t)0x00000000U) /*!< DCAL not set after input data written in DIN register */
+#define HASH_DIGEST_CALCULATION_STARTED ((uint32_t)0x00000001U) /*!< DCAL set after input data written in DIN register */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Number_Of_CSR_Registers HASH Number of Context Swap Registers
+ * @{
+ */
+#define HASH_NUMBER_OF_CSR_REGISTERS 54U /*!< Number of Context Swap Registers */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_TimeOut_Value HASH TimeOut Value
+ * @{
+ */
+#define HASH_TIMEOUTVALUE 1000U /*!< Time-out value */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_DMA_Suspension_Words_Limit HASH DMA suspension words limit
+ * @{
+ */
+#define HASH_DMA_SUSPENSION_WORDS_LIMIT 20U /*!< Number of words below which DMA suspension is aborted */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASH_DMAError(DMA_HandleTypeDef *hdma);
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static HAL_StatusTypeDef HASH_WaitOnFlagUntilTimeout(HASH_HandleTypeDef *hhash, uint32_t Flag, FlagStatus Status,
+ uint32_t Timeout);
+static HAL_StatusTypeDef HASH_WriteData(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+static HAL_StatusTypeDef HASH_IT(HASH_HandleTypeDef *hhash);
+static uint32_t HASH_Write_Block_Data(HASH_HandleTypeDef *hhash);
+static HAL_StatusTypeDef HMAC_Processing(HASH_HandleTypeDef *hhash, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions HASH Exported Functions
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization, configuration and call-back functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the HASH according to the specified parameters
+ in the HASH_InitTypeDef and create the associated handle
+ (+) DeInitialize the HASH peripheral
+ (+) Initialize the HASH MCU Specific Package (MSP)
+ (+) DeInitialize the HASH MSP
+
+ [..] This section provides as well call back functions definitions for user
+ code to manage:
+ (+) Input data transfer to Peripheral completion
+ (+) Calculated digest retrieval completion
+ (+) Error management
+
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the HASH according to the specified parameters in the
+ HASH_HandleTypeDef and create the associated handle.
+ * @note Only MDMAT and DATATYPE bits of HASH Peripheral are set by HAL_HASH_Init(),
+ * other configuration bits are set by HASH or HMAC processing APIs.
+ * @note MDMAT bit is systematically reset by HAL_HASH_Init(). To set it for
+ * multi-buffer HASH processing, user needs to resort to
+ * __HAL_HASH_SET_MDMAT() macro. For HMAC multi-buffer processing, the
+ * relevant APIs manage themselves the MDMAT bit.
+ * @param hhash HASH handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash)
+{
+ /* Check the hash handle allocation */
+ if (hhash == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_HASH_DATATYPE(hhash->Init.DataType));
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ if (hhash->State == HAL_HASH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hhash->Lock = HAL_UNLOCKED;
+
+ /* Reset Callback pointers in HAL_HASH_STATE_RESET only */
+ hhash->InCpltCallback = HAL_HASH_InCpltCallback; /* Legacy weak (surcharged) input completion callback */
+ hhash->DgstCpltCallback = HAL_HASH_DgstCpltCallback; /* Legacy weak (surcharged) digest computation
+ completion callback */
+ hhash->ErrorCallback = HAL_HASH_ErrorCallback; /* Legacy weak (surcharged) error callback */
+ if (hhash->MspInitCallback == NULL)
+ {
+ hhash->MspInitCallback = HAL_HASH_MspInit;
+ }
+
+ /* Init the low level hardware */
+ hhash->MspInitCallback(hhash);
+ }
+#else
+ if (hhash->State == HAL_HASH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hhash->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware */
+ HAL_HASH_MspInit(hhash);
+ }
+#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Reset HashInCount, HashITCounter, HashBuffSize and NbWordsAlreadyPushed */
+ hhash->HashInCount = 0;
+ hhash->HashBuffSize = 0;
+ hhash->HashITCounter = 0;
+ hhash->NbWordsAlreadyPushed = 0;
+ /* Reset digest calculation bridle (MDMAT bit control) */
+ hhash->DigestCalculationDisable = RESET;
+ /* Set phase to READY */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+ /* Reset suspension request flag */
+ hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE;
+
+ /* Set the data type bit */
+ MODIFY_REG(HASH->CR, HASH_CR_DATATYPE, hhash->Init.DataType);
+ /* Reset MDMAT bit */
+ __HAL_HASH_RESET_MDMAT();
+ /* Reset HASH handle status */
+ hhash->Status = HAL_OK;
+
+ /* Set the HASH state to Ready */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Initialise the error code */
+ hhash->ErrorCode = HAL_HASH_ERROR_NONE;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the HASH peripheral.
+ * @param hhash HASH handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash)
+{
+ /* Check the HASH handle allocation */
+ if (hhash == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Set the default HASH phase */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ /* Reset HashInCount, HashITCounter and HashBuffSize */
+ hhash->HashInCount = 0;
+ hhash->HashBuffSize = 0;
+ hhash->HashITCounter = 0;
+ /* Reset digest calculation bridle (MDMAT bit control) */
+ hhash->DigestCalculationDisable = RESET;
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ if (hhash->MspDeInitCallback == NULL)
+ {
+ hhash->MspDeInitCallback = HAL_HASH_MspDeInit;
+ }
+
+ /* DeInit the low level hardware */
+ hhash->MspDeInitCallback(hhash);
+#else
+ /* DeInit the low level hardware: CLOCK, NVIC */
+ HAL_HASH_MspDeInit(hhash);
+#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */
+
+
+ /* Reset HASH handle status */
+ hhash->Status = HAL_OK;
+
+ /* Set the HASH state to Ready */
+ hhash->State = HAL_HASH_STATE_RESET;
+
+ /* Initialise the error code */
+ hhash->ErrorCode = HAL_HASH_ERROR_NONE;
+
+ /* Reset multi buffers accumulation flag */
+ hhash->Accumulation = 0U;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the HASH MSP.
+ * @param hhash HASH handle.
+ * @retval None
+ */
+__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ HAL_HASH_MspInit() can be implemented in the user file.
+ */
+}
+
+/**
+ * @brief DeInitialize the HASH MSP.
+ * @param hhash HASH handle.
+ * @retval None
+ */
+__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ HAL_HASH_MspDeInit() can be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Input data transfer complete call back.
+ * @note HAL_HASH_InCpltCallback() is called when the complete input message
+ * has been fed to the Peripheral. This API is invoked only when input data are
+ * entered under interruption or through DMA.
+ * @note In case of HASH or HMAC multi-buffer DMA feeding case (MDMAT bit set),
+ * HAL_HASH_InCpltCallback() is called at the end of each buffer feeding
+ * to the Peripheral.
+ * @param hhash HASH handle.
+ * @retval None
+ */
+__weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ HAL_HASH_InCpltCallback() can be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Digest computation complete call back.
+ * @note HAL_HASH_DgstCpltCallback() is used under interruption, is not
+ * relevant with DMA.
+ * @param hhash HASH handle.
+ * @retval None
+ */
+__weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ HAL_HASH_DgstCpltCallback() can be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Error callback.
+ * @note Code user can resort to hhash->Status (HAL_ERROR, HAL_TIMEOUT,...)
+ * to retrieve the error type.
+ * @param hhash HASH handle.
+ * @retval None
+ */
+__weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ HAL_HASH_ErrorCallback() can be implemented in the user file.
+ */
+}
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User HASH Callback
+ * To be used instead of the weak (surcharged) predefined callback
+ * @param hhash HASH handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_HASH_INPUTCPLT_CB_ID HASH input completion Callback ID
+ * @arg @ref HAL_HASH_DGSTCPLT_CB_ID HASH digest computation completion Callback ID
+ * @arg @ref HAL_HASH_ERROR_CB_ID HASH error Callback ID
+ * @arg @ref HAL_HASH_MSPINIT_CB_ID HASH MspInit callback ID
+ * @arg @ref HAL_HASH_MSPDEINIT_CB_ID HASH MspDeInit callback ID
+ * @param pCallback pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID,
+ pHASH_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(hhash);
+
+ if (HAL_HASH_STATE_READY == hhash->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_HASH_INPUTCPLT_CB_ID :
+ hhash->InCpltCallback = pCallback;
+ break;
+
+ case HAL_HASH_DGSTCPLT_CB_ID :
+ hhash->DgstCpltCallback = pCallback;
+ break;
+
+ case HAL_HASH_ERROR_CB_ID :
+ hhash->ErrorCallback = pCallback;
+ break;
+
+ case HAL_HASH_MSPINIT_CB_ID :
+ hhash->MspInitCallback = pCallback;
+ break;
+
+ case HAL_HASH_MSPDEINIT_CB_ID :
+ hhash->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (HAL_HASH_STATE_RESET == hhash->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_HASH_MSPINIT_CB_ID :
+ hhash->MspInitCallback = pCallback;
+ break;
+
+ case HAL_HASH_MSPDEINIT_CB_ID :
+ hhash->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hhash);
+ return status;
+}
+
+/**
+ * @brief Unregister a HASH Callback
+ * HASH Callback is redirected to the weak (surcharged) predefined callback
+ * @param hhash HASH handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_HASH_INPUTCPLT_CB_ID HASH input completion Callback ID
+ * @arg @ref HAL_HASH_DGSTCPLT_CB_ID HASH digest computation completion Callback ID
+ * @arg @ref HAL_HASH_ERROR_CB_ID HASH error Callback ID
+ * @arg @ref HAL_HASH_MSPINIT_CB_ID HASH MspInit callback ID
+ * @arg @ref HAL_HASH_MSPDEINIT_CB_ID HASH MspDeInit callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hhash);
+
+ if (HAL_HASH_STATE_READY == hhash->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_HASH_INPUTCPLT_CB_ID :
+ hhash->InCpltCallback = HAL_HASH_InCpltCallback; /* Legacy weak (surcharged) input completion callback */
+ break;
+
+ case HAL_HASH_DGSTCPLT_CB_ID :
+ hhash->DgstCpltCallback = HAL_HASH_DgstCpltCallback; /* Legacy weak (surcharged) digest computation
+ completion callback */
+ break;
+
+ case HAL_HASH_ERROR_CB_ID :
+ hhash->ErrorCallback = HAL_HASH_ErrorCallback; /* Legacy weak (surcharged) error callback */
+ break;
+
+ case HAL_HASH_MSPINIT_CB_ID :
+ hhash->MspInitCallback = HAL_HASH_MspInit; /* Legacy weak (surcharged) Msp Init */
+ break;
+
+ case HAL_HASH_MSPDEINIT_CB_ID :
+ hhash->MspDeInitCallback = HAL_HASH_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */
+ break;
+
+ default :
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (HAL_HASH_STATE_RESET == hhash->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_HASH_MSPINIT_CB_ID :
+ hhash->MspInitCallback = HAL_HASH_MspInit; /* Legacy weak (surcharged) Msp Init */
+ break;
+
+ case HAL_HASH_MSPDEINIT_CB_ID :
+ hhash->MspDeInitCallback = HAL_HASH_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */
+ break;
+
+ default :
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hhash);
+ return status;
+}
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions in polling mode
+ * @brief HASH processing functions using polling mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### Polling mode HASH processing functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (++) HAL_HASH_MD5_Start()
+ (++) HAL_HASH_MD5_Accmlt()
+ (++) HAL_HASH_MD5_Accmlt_End()
+ (+) SHA1
+ (++) HAL_HASH_SHA1_Start()
+ (++) HAL_HASH_SHA1_Accmlt()
+ (++) HAL_HASH_SHA1_Accmlt_End()
+
+ [..] For a single buffer to be hashed, user can resort to HAL_HASH_xxx_Start().
+
+ [..] In case of multi-buffer HASH processing (a single digest is computed while
+ several buffers are fed to the Peripheral), the user can resort to successive calls
+ to HAL_HASH_xxx_Accumulate() and wrap-up the digest computation by a call
+ to HAL_HASH_xxx_Accumulate_End().
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the HASH peripheral in MD5 mode, next process pInBuffer then
+ * read the computed digest.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @param Timeout Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Timeout)
+{
+ return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief If not already done, initialize the HASH peripheral in MD5 mode then
+ * processes pInBuffer.
+ * @note Consecutive calls to HAL_HASH_MD5_Accmlt() can be used to feed
+ * several input buffers back-to-back to the Peripheral that will yield a single
+ * HASH signature once all buffers have been entered. Wrap-up of input
+ * buffers feeding and retrieval of digest is done by a call to
+ * HAL_HASH_MD5_Accmlt_End().
+ * @note Field hhash->Phase of HASH handle is tested to check whether or not
+ * the Peripheral has already been initialized.
+ * @note Digest is not retrieved by this API, user must resort to HAL_HASH_MD5_Accmlt_End()
+ * to read it, feeding at the same time the last input buffer to the Peripheral.
+ * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
+ * HASH digest computation is corrupted. Only HAL_HASH_MD5_Accmlt_End() is able
+ * to manage the ending buffer with a length in bytes not a multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes, must be a multiple of 4.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HASH_Accumulate(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief End computation of a single HASH signature after several calls to HAL_HASH_MD5_Accmlt() API.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @param Timeout Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer, uint32_t Timeout)
+{
+ return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief Initialize the HASH peripheral in SHA1 mode, next process pInBuffer then
+ * read the computed digest.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @param Timeout Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Timeout)
+{
+ return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @brief If not already done, initialize the HASH peripheral in SHA1 mode then
+ * processes pInBuffer.
+ * @note Consecutive calls to HAL_HASH_SHA1_Accmlt() can be used to feed
+ * several input buffers back-to-back to the Peripheral that will yield a single
+ * HASH signature once all buffers have been entered. Wrap-up of input
+ * buffers feeding and retrieval of digest is done by a call to
+ * HAL_HASH_SHA1_Accmlt_End().
+ * @note Field hhash->Phase of HASH handle is tested to check whether or not
+ * the Peripheral has already been initialized.
+ * @note Digest is not retrieved by this API, user must resort to HAL_HASH_SHA1_Accmlt_End()
+ * to read it, feeding at the same time the last input buffer to the Peripheral.
+ * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
+ * HASH digest computation is corrupted. Only HAL_HASH_SHA1_Accmlt_End() is able
+ * to manage the ending buffer with a length in bytes not a multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes, must be a multiple of 4.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HASH_Accumulate(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @brief End computation of a single HASH signature after several calls to HAL_HASH_SHA1_Accmlt() API.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @param Timeout Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer, uint32_t Timeout)
+{
+ return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions in interrupt mode
+ * @brief HASH processing functions using interrupt mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### Interruption mode HASH processing functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in interrupt mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (++) HAL_HASH_MD5_Start_IT()
+ (++) HAL_HASH_MD5_Accmlt_IT()
+ (++) HAL_HASH_MD5_Accmlt_End_IT()
+ (+) SHA1
+ (++) HAL_HASH_SHA1_Start_IT()
+ (++) HAL_HASH_SHA1_Accmlt_IT()
+ (++) HAL_HASH_SHA1_Accmlt_End_IT()
+
+ [..] API HAL_HASH_IRQHandler() manages each HASH interruption.
+
+ [..] Note that HAL_HASH_IRQHandler() manages as well HASH Peripheral interruptions when in
+ HMAC processing mode.
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the HASH peripheral in MD5 mode, next process pInBuffer then
+ * read the computed digest in interruption mode.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer)
+{
+ return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief If not already done, initialize the HASH peripheral in MD5 mode then
+ * processes pInBuffer in interruption mode.
+ * @note Consecutive calls to HAL_HASH_MD5_Accmlt_IT() can be used to feed
+ * several input buffers back-to-back to the Peripheral that will yield a single
+ * HASH signature once all buffers have been entered. Wrap-up of input
+ * buffers feeding and retrieval of digest is done by a call to
+ * HAL_HASH_MD5_Accmlt_End_IT().
+ * @note Field hhash->Phase of HASH handle is tested to check whether or not
+ * the Peripheral has already been initialized.
+ * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
+ * HASH digest computation is corrupted. Only HAL_HASH_MD5_Accmlt_End_IT() is able
+ * to manage the ending buffer with a length in bytes not a multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes, must be a multiple of 4.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HASH_Accumulate_IT(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief End computation of a single HASH signature after several calls to HAL_HASH_MD5_Accmlt_IT() API.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer)
+{
+ return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief Initialize the HASH peripheral in SHA1 mode, next process pInBuffer then
+ * read the computed digest in interruption mode.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer)
+{
+ return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA1);
+}
+
+
+/**
+ * @brief If not already done, initialize the HASH peripheral in SHA1 mode then
+ * processes pInBuffer in interruption mode.
+ * @note Consecutive calls to HAL_HASH_SHA1_Accmlt_IT() can be used to feed
+ * several input buffers back-to-back to the Peripheral that will yield a single
+ * HASH signature once all buffers have been entered. Wrap-up of input
+ * buffers feeding and retrieval of digest is done by a call to
+ * HAL_HASH_SHA1_Accmlt_End_IT().
+ * @note Field hhash->Phase of HASH handle is tested to check whether or not
+ * the Peripheral has already been initialized.
+ * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
+ * HASH digest computation is corrupted. Only HAL_HASH_SHA1_Accmlt_End_IT() is able
+ * to manage the ending buffer with a length in bytes not a multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes, must be a multiple of 4.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HASH_Accumulate_IT(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @brief End computation of a single HASH signature after several calls to HAL_HASH_SHA1_Accmlt_IT() API.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer)
+{
+ return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @brief Handle HASH interrupt request.
+ * @param hhash HASH handle.
+ * @note HAL_HASH_IRQHandler() handles interrupts in HMAC processing as well.
+ * @note In case of error reported during the HASH interruption processing,
+ * HAL_HASH_ErrorCallback() API is called so that user code can
+ * manage the error. The error type is available in hhash->Status field.
+ * @retval None
+ */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+ hhash->Status = HASH_IT(hhash);
+ if (hhash->Status != HAL_OK)
+ {
+ hhash->ErrorCode |= HAL_HASH_ERROR_IT;
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->ErrorCallback(hhash);
+#else
+ HAL_HASH_ErrorCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+ /* After error handling by code user, reset HASH handle HAL status */
+ hhash->Status = HAL_OK;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions in DMA mode
+ * @brief HASH processing functions using DMA mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### DMA mode HASH processing functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (++) HAL_HASH_MD5_Start_DMA()
+ (++) HAL_HASH_MD5_Finish()
+ (+) SHA1
+ (++) HAL_HASH_SHA1_Start_DMA()
+ (++) HAL_HASH_SHA1_Finish()
+
+ [..] When resorting to DMA mode to enter the data in the Peripheral, user must resort
+ to HAL_HASH_xxx_Start_DMA() then read the resulting digest with
+ HAL_HASH_xxx_Finish().
+ [..] In case of multi-buffer HASH processing, MDMAT bit must first be set before
+ the successive calls to HAL_HASH_xxx_Start_DMA(). Then, MDMAT bit needs to be
+ reset before the last call to HAL_HASH_xxx_Start_DMA(). Digest is finally
+ retrieved thanks to HAL_HASH_xxx_Finish().
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the HASH peripheral in MD5 mode then initiate a DMA transfer
+ * to feed the input buffer to the Peripheral.
+ * @note Once the DMA transfer is finished, HAL_HASH_MD5_Finish() API must
+ * be called to retrieve the computed digest.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief Return the computed digest in MD5 mode.
+ * @note The API waits for DCIS to be set then reads the computed digest.
+ * @note HAL_HASH_MD5_Finish() can be used as well to retrieve the digest in
+ * HMAC MD5 mode.
+ * @param hhash HASH handle.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @param Timeout Timeout value.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout)
+{
+ return HASH_Finish(hhash, pOutBuffer, Timeout);
+}
+
+/**
+ * @brief Initialize the HASH peripheral in SHA1 mode then initiate a DMA transfer
+ * to feed the input buffer to the Peripheral.
+ * @note Once the DMA transfer is finished, HAL_HASH_SHA1_Finish() API must
+ * be called to retrieve the computed digest.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
+}
+
+
+/**
+ * @brief Return the computed digest in SHA1 mode.
+ * @note The API waits for DCIS to be set then reads the computed digest.
+ * @note HAL_HASH_SHA1_Finish() can be used as well to retrieve the digest in
+ * HMAC SHA1 mode.
+ * @param hhash HASH handle.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @param Timeout Timeout value.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout)
+{
+ return HASH_Finish(hhash, pOutBuffer, Timeout);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group5 HMAC processing functions in polling mode
+ * @brief HMAC processing functions using polling mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### Polling mode HMAC processing functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (++) HAL_HMAC_MD5_Start()
+ (+) SHA1
+ (++) HAL_HMAC_SHA1_Start()
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC MD5 mode, next process pInBuffer then
+ * read the computed digest.
+ * @note Digest is available in pOutBuffer.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @param Timeout Timeout value.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Timeout)
+{
+ return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC SHA1 mode, next process pInBuffer then
+ * read the computed digest.
+ * @note Digest is available in pOutBuffer.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @param Timeout Timeout value.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Timeout)
+{
+ return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HASH_Exported_Functions_Group6 HMAC processing functions in interrupt mode
+ * @brief HMAC processing functions using interrupt mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### Interrupt mode HMAC processing functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in interrupt mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (++) HAL_HMAC_MD5_Start_IT()
+ (+) SHA1
+ (++) HAL_HMAC_SHA1_Start_IT()
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC MD5 mode, next process pInBuffer then
+ * read the computed digest in interrupt mode.
+ * @note Digest is available in pOutBuffer.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer)
+{
+ return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_MD5);
+}
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC SHA1 mode, next process pInBuffer then
+ * read the computed digest in interrupt mode.
+ * @note Digest is available in pOutBuffer.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
+ uint8_t *pOutBuffer)
+{
+ return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup HASH_Exported_Functions_Group7 HMAC processing functions in DMA mode
+ * @brief HMAC processing functions using DMA modes.
+ *
+@verbatim
+ ===============================================================================
+ ##### DMA mode HMAC processing functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (++) HAL_HMAC_MD5_Start_DMA()
+ (+) SHA1
+ (++) HAL_HMAC_SHA1_Start_DMA()
+
+ [..] When resorting to DMA mode to enter the data in the Peripheral for HMAC processing,
+ user must resort to HAL_HMAC_xxx_Start_DMA() then read the resulting digest
+ with HAL_HASH_xxx_Finish().
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC MD5 mode then initiate the required
+ * DMA transfers to feed the key and the input buffer to the Peripheral.
+ * @note Once the DMA transfers are finished (indicated by hhash->State set back
+ * to HAL_HASH_STATE_READY), HAL_HASH_MD5_Finish() API must be called to retrieve
+ * the computed digest.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @note If MDMAT bit is set before calling this function (multi-buffer
+ * HASH processing case), the input buffer size (in bytes) must be
+ * a multiple of 4 otherwise, the HASH digest computation is corrupted.
+ * For the processing of the last buffer of the thread, MDMAT bit must
+ * be reset and the buffer length (in bytes) doesn't have to be a
+ * multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
+}
+
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC SHA1 mode then initiate the required
+ * DMA transfers to feed the key and the input buffer to the Peripheral.
+ * @note Once the DMA transfers are finished (indicated by hhash->State set back
+ * to HAL_HASH_STATE_READY), HAL_HASH_SHA1_Finish() API must be called to retrieve
+ * the computed digest.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @note If MDMAT bit is set before calling this function (multi-buffer
+ * HASH processing case), the input buffer size (in bytes) must be
+ * a multiple of 4 otherwise, the HASH digest computation is corrupted.
+ * For the processing of the last buffer of the thread, MDMAT bit must
+ * be reset and the buffer length (in bytes) doesn't have to be a
+ * multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group8 Peripheral states functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State methods #####
+ ===============================================================================
+ [..]
+ This section permits to get in run-time the state and the peripheral handle
+ status of the peripheral:
+ (+) HAL_HASH_GetState()
+ (+) HAL_HASH_GetStatus()
+
+ [..]
+ Additionally, this subsection provides functions allowing to save and restore
+ the HASH or HMAC processing context in case of calculation suspension:
+ (+) HAL_HASH_ContextSaving()
+ (+) HAL_HASH_ContextRestoring()
+
+ [..]
+ This subsection provides functions allowing to suspend the HASH processing
+ (+) when input are fed to the Peripheral by software
+ (++) HAL_HASH_SwFeed_ProcessSuspend()
+ (+) when input are fed to the Peripheral by DMA
+ (++) HAL_HASH_DMAFeed_ProcessSuspend()
+
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the HASH handle state.
+ * @note The API yields the current state of the handle (BUSY, READY,...).
+ * @param hhash HASH handle.
+ * @retval HAL HASH state
+ */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash)
+{
+ return hhash->State;
+}
+
+
+/**
+ * @brief Return the HASH HAL status.
+ * @note The API yields the HAL status of the handle: it is the result of the
+ * latest HASH processing and allows to report any issue (e.g. HAL_TIMEOUT).
+ * @param hhash HASH handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_GetStatus(HASH_HandleTypeDef *hhash)
+{
+ return hhash->Status;
+}
+
+/**
+ * @brief Save the HASH context in case of processing suspension.
+ * @param hhash HASH handle.
+ * @param pMemBuffer pointer to the memory buffer where the HASH context
+ * is saved.
+ * @note The IMR, STR, CR then all the CSR registers are saved
+ * in that order. Only the r/w bits are read to be restored later on.
+ * @note By default, all the context swap registers (there are
+ * HASH_NUMBER_OF_CSR_REGISTERS of those) are saved.
+ * @note pMemBuffer points to a buffer allocated by the user. The buffer size
+ * must be at least (HASH_NUMBER_OF_CSR_REGISTERS + 3) * 4 uint8 long.
+ * @retval None
+ */
+void HAL_HASH_ContextSaving(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer)
+{
+ uint32_t mem_ptr = (uint32_t)pMemBuffer;
+ uint32_t csr_ptr = (uint32_t)HASH->CSR;
+ uint32_t i;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* Save IMR register content */
+ *(uint32_t *)(mem_ptr) = READ_BIT(HASH->IMR, HASH_IT_DINI | HASH_IT_DCI);
+ mem_ptr += 4U;
+ /* Save STR register content */
+ *(uint32_t *)(mem_ptr) = READ_BIT(HASH->STR, HASH_STR_NBLW);
+ mem_ptr += 4U;
+ /* Save CR register content */
+ *(uint32_t *)(mem_ptr) = READ_BIT(HASH->CR, HASH_CR_DMAE | HASH_CR_DATATYPE | HASH_CR_MODE | HASH_CR_ALGO |
+ HASH_CR_LKEY | HASH_CR_MDMAT);
+ mem_ptr += 4U;
+ /* By default, save all CSRs registers */
+ for (i = HASH_NUMBER_OF_CSR_REGISTERS; i > 0U; i--)
+ {
+ *(uint32_t *)(mem_ptr) = *(uint32_t *)(csr_ptr);
+ mem_ptr += 4U;
+ csr_ptr += 4U;
+ }
+}
+
+
+/**
+ * @brief Restore the HASH context in case of processing resumption.
+ * @param hhash HASH handle.
+ * @param pMemBuffer pointer to the memory buffer where the HASH context
+ * is stored.
+ * @note The IMR, STR, CR then all the CSR registers are restored
+ * in that order. Only the r/w bits are restored.
+ * @note By default, all the context swap registers (HASH_NUMBER_OF_CSR_REGISTERS
+ * of those) are restored (all of them have been saved by default
+ * beforehand).
+ * @retval None
+ */
+void HAL_HASH_ContextRestoring(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer)
+{
+ uint32_t mem_ptr = (uint32_t)pMemBuffer;
+ uint32_t csr_ptr = (uint32_t)HASH->CSR;
+ uint32_t i;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+
+ /* Restore IMR register content */
+ WRITE_REG(HASH->IMR, (*(uint32_t *)(mem_ptr)));
+ mem_ptr += 4U;
+ /* Restore STR register content */
+ WRITE_REG(HASH->STR, (*(uint32_t *)(mem_ptr)));
+ mem_ptr += 4U;
+ /* Restore CR register content */
+ WRITE_REG(HASH->CR, (*(uint32_t *)(mem_ptr)));
+ mem_ptr += 4U;
+
+ /* Reset the HASH processor before restoring the Context
+ Swap Registers (CSR) */
+ __HAL_HASH_INIT();
+
+ /* By default, restore all CSR registers */
+ for (i = HASH_NUMBER_OF_CSR_REGISTERS; i > 0U; i--)
+ {
+ WRITE_REG((*(uint32_t *)(csr_ptr)), (*(uint32_t *)(mem_ptr)));
+ mem_ptr += 4U;
+ csr_ptr += 4U;
+ }
+}
+
+
+/**
+ * @brief Initiate HASH processing suspension when in polling or interruption mode.
+ * @param hhash HASH handle.
+ * @note Set the handle field SuspendRequest to the appropriate value so that
+ * the on-going HASH processing is suspended as soon as the required
+ * conditions are met. Note that the actual suspension is carried out
+ * by the functions HASH_WriteData() in polling mode and HASH_IT() in
+ * interruption mode.
+ * @retval None
+ */
+void HAL_HASH_SwFeed_ProcessSuspend(HASH_HandleTypeDef *hhash)
+{
+ /* Set Handle Suspend Request field */
+ hhash->SuspendRequest = HAL_HASH_SUSPEND;
+}
+
+/**
+ * @brief Suspend the HASH processing when in DMA mode.
+ * @param hhash HASH handle.
+ * @note When suspension attempt occurs at the very end of a DMA transfer and
+ * all the data have already been entered in the Peripheral, hhash->State is
+ * set to HAL_HASH_STATE_READY and the API returns HAL_ERROR. It is
+ * recommended to wrap-up the processing in reading the digest as usual.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_DMAFeed_ProcessSuspend(HASH_HandleTypeDef *hhash)
+{
+ uint32_t tmp_remaining_DMATransferSize_inWords;
+ uint32_t tmp_initial_DMATransferSize_inWords;
+ uint32_t tmp_words_already_pushed;
+
+ if (hhash->State == HAL_HASH_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+
+ /* Make sure there is enough time to suspend the processing */
+ tmp_remaining_DMATransferSize_inWords = ((DMA_Stream_TypeDef *)hhash->hdmain->Instance)->NDTR;
+
+ if (tmp_remaining_DMATransferSize_inWords <= HASH_DMA_SUSPENSION_WORDS_LIMIT)
+ {
+ /* No suspension attempted since almost to the end of the transferred data. */
+ /* Best option for user code is to wrap up low priority message hashing */
+ return HAL_ERROR;
+ }
+
+ /* Wait for BUSY flag to be reset */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS) != RESET)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait for BUSY flag to be set */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, RESET, HASH_TIMEOUTVALUE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Disable DMA channel */
+ /* Note that the Abort function will
+ - Clear the transfer error flags
+ - Unlock
+ - Set the State
+ */
+ if (HAL_DMA_Abort(hhash->hdmain) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Clear DMAE bit */
+ CLEAR_BIT(HASH->CR, HASH_CR_DMAE);
+
+ /* Wait for BUSY flag to be reset */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS) != RESET)
+ {
+ return HAL_ERROR;
+ }
+
+ /* At this point, DMA interface is disabled and no transfer is on-going */
+ /* Retrieve from the DMA handle how many words remain to be written */
+ tmp_remaining_DMATransferSize_inWords = ((DMA_Stream_TypeDef *)hhash->hdmain->Instance)->NDTR;
+
+ if (tmp_remaining_DMATransferSize_inWords == 0U)
+ {
+ /* All the DMA transfer is actually done. Suspension occurred at the very end
+ of the transfer. Either the digest computation is about to start (HASH case)
+ or processing is about to move from one step to another (HMAC case).
+ In both cases, the processing can't be suspended at this point. It is
+ safer to
+ - retrieve the low priority block digest before starting the high
+ priority block processing (HASH case)
+ - re-attempt a new suspension (HMAC case)
+ */
+ return HAL_ERROR;
+ }
+ else
+ {
+
+ /* Compute how many words were supposed to be transferred by DMA */
+ tmp_initial_DMATransferSize_inWords = (((hhash->HashInCount % 4U) != 0U) ? \
+ ((hhash->HashInCount + 3U) / 4U) : (hhash->HashInCount / 4U));
+
+ /* If discrepancy between the number of words reported by DMA Peripheral and
+ the numbers of words entered as reported by HASH Peripheral, correct it */
+ /* tmp_words_already_pushed reflects the number of words that were already pushed before
+ the start of DMA transfer (multi-buffer processing case) */
+ tmp_words_already_pushed = hhash->NbWordsAlreadyPushed;
+ if (((tmp_words_already_pushed + tmp_initial_DMATransferSize_inWords - \
+ tmp_remaining_DMATransferSize_inWords) % 16U) != HASH_NBW_PUSHED())
+ {
+ tmp_remaining_DMATransferSize_inWords--; /* one less word to be transferred again */
+ }
+
+ /* Accordingly, update the input pointer that points at the next word to be
+ transferred to the Peripheral by DMA */
+ hhash->pHashInBuffPtr += 4U * (tmp_initial_DMATransferSize_inWords - tmp_remaining_DMATransferSize_inWords) ;
+
+ /* And store in HashInCount the remaining size to transfer (in bytes) */
+ hhash->HashInCount = 4U * tmp_remaining_DMATransferSize_inWords;
+
+ }
+
+ /* Set State as suspended */
+ hhash->State = HAL_HASH_STATE_SUSPENDED;
+
+ return HAL_OK;
+
+ }
+}
+
+/**
+ * @brief Return the HASH handle error code.
+ * @param hhash pointer to a HASH_HandleTypeDef structure.
+ * @retval HASH Error Code
+ */
+uint32_t HAL_HASH_GetError(HASH_HandleTypeDef *hhash)
+{
+ /* Return HASH Error Code */
+ return hhash->ErrorCode;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+
+/**
+ * @brief DMA HASH Input Data transfer completion callback.
+ * @param hdma DMA handle.
+ * @note In case of HMAC processing, HASH_DMAXferCplt() initiates
+ * the next DMA transfer for the following HMAC step.
+ * @retval None
+ */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef *hhash = (HASH_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+ uint32_t inputaddr;
+ uint32_t buffersize;
+ HAL_StatusTypeDef status;
+
+ if (hhash->State != HAL_HASH_STATE_SUSPENDED)
+ {
+
+ /* Disable the DMA transfer */
+ CLEAR_BIT(HASH->CR, HASH_CR_DMAE);
+
+ if (READ_BIT(HASH->CR, HASH_CR_MODE) == 0U)
+ {
+ /* If no HMAC processing, input data transfer is now over */
+
+ /* Change the HASH state to ready */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete call back */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->InCpltCallback(hhash);
+#else
+ HAL_HASH_InCpltCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+ }
+ else
+ {
+ /* HMAC processing: depending on the current HMAC step and whether or
+ not multi-buffer processing is on-going, the next step is initiated
+ and MDMAT bit is set. */
+
+
+ if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3)
+ {
+ /* This is the end of HMAC processing */
+
+ /* Change the HASH state to ready */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete call back
+ (note that the last DMA transfer was that of the key
+ for the outer HASH operation). */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->InCpltCallback(hhash);
+#else
+ HAL_HASH_InCpltCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+ return;
+ }
+ else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1)
+ {
+ inputaddr = (uint32_t)hhash->pHashMsgBuffPtr; /* DMA transfer start address */
+ buffersize = hhash->HashBuffSize; /* DMA transfer size (in bytes) */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; /* Move phase from Step 1 to Step 2 */
+
+ /* In case of suspension request, save the new starting parameters */
+ hhash->HashInCount = hhash->HashBuffSize; /* Initial DMA transfer size (in bytes) */
+ hhash->pHashInBuffPtr = hhash->pHashMsgBuffPtr ; /* DMA transfer start address */
+
+ hhash->NbWordsAlreadyPushed = 0U; /* Reset number of words already pushed */
+ /* Check whether or not digest calculation must be disabled (in case of multi-buffer HMAC processing) */
+ if (hhash->DigestCalculationDisable != RESET)
+ {
+ /* Digest calculation is disabled: Step 2 must start with MDMAT bit set,
+ no digest calculation will be triggered at the end of the input buffer feeding to the Peripheral */
+ __HAL_HASH_SET_MDMAT();
+ }
+ }
+ else /*case (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)*/
+ {
+ if (hhash->DigestCalculationDisable != RESET)
+ {
+ /* No automatic move to Step 3 as a new message buffer will be fed to the Peripheral
+ (case of multi-buffer HMAC processing):
+ DCAL must not be set.
+ Phase remains in Step 2, MDMAT remains set at this point.
+ Change the HASH state to ready and call Input data transfer complete call back. */
+ hhash->State = HAL_HASH_STATE_READY;
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->InCpltCallback(hhash);
+#else
+ HAL_HASH_InCpltCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+ return ;
+ }
+ else
+ {
+ /* Digest calculation is not disabled (case of single buffer input or last buffer
+ of multi-buffer HMAC processing) */
+ inputaddr = (uint32_t)hhash->Init.pKey; /* DMA transfer start address */
+ buffersize = hhash->Init.KeySize; /* DMA transfer size (in bytes) */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; /* Move phase from Step 2 to Step 3 */
+ /* In case of suspension request, save the new starting parameters */
+ hhash->HashInCount = hhash->Init.KeySize; /* Initial size for second DMA transfer (input data) */
+ hhash->pHashInBuffPtr = hhash->Init.pKey ; /* address passed to DMA, now entering data message */
+
+ hhash->NbWordsAlreadyPushed = 0U; /* Reset number of words already pushed */
+ }
+ }
+
+ /* Configure the Number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(buffersize);
+
+ /* Set the HASH DMA transfer completion call back */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+
+ /* Enable the DMA In DMA stream */
+ status = HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, \
+ (((buffersize % 4U) != 0U) ? ((buffersize + (4U - (buffersize % 4U))) / 4U) : \
+ (buffersize / 4U)));
+
+ /* Enable DMA requests */
+ SET_BIT(HASH->CR, HASH_CR_DMAE);
+
+ /* Return function status */
+ if (status != HAL_OK)
+ {
+ /* Update HASH state machine to error */
+ hhash->State = HAL_HASH_STATE_ERROR;
+ }
+ else
+ {
+ /* Change HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+ }
+ }
+ }
+
+ return;
+}
+
+/**
+ * @brief DMA HASH communication error callback.
+ * @param hdma DMA handle.
+ * @note HASH_DMAError() callback invokes HAL_HASH_ErrorCallback() that
+ * can contain user code to manage the error.
+ * @retval None
+ */
+static void HASH_DMAError(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef *hhash = (HASH_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hhash->State != HAL_HASH_STATE_SUSPENDED)
+ {
+ hhash->ErrorCode |= HAL_HASH_ERROR_DMA;
+ /* Set HASH state to ready to prevent any blocking issue in user code
+ present in HAL_HASH_ErrorCallback() */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Set HASH handle status to error */
+ hhash->Status = HAL_ERROR;
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->ErrorCallback(hhash);
+#else
+ HAL_HASH_ErrorCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+ /* After error handling by code user, reset HASH handle HAL status */
+ hhash->Status = HAL_OK;
+
+ }
+}
+
+/**
+ * @brief Feed the input buffer to the HASH Peripheral.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to input buffer.
+ * @param Size the size of input buffer in bytes.
+ * @note HASH_WriteData() regularly reads hhash->SuspendRequest to check whether
+ * or not the HASH processing must be suspended. If this is the case, the
+ * processing is suspended when possible and the Peripheral feeding point reached at
+ * suspension time is stored in the handle for resumption later on.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef HASH_WriteData(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t buffercounter;
+ __IO uint32_t inputaddr = (uint32_t) pInBuffer;
+
+ for (buffercounter = 0U; buffercounter < Size; buffercounter += 4U)
+ {
+ /* Write input data 4 bytes at a time */
+ HASH->DIN = *(uint32_t *)inputaddr;
+ inputaddr += 4U;
+
+ /* If the suspension flag has been raised and if the processing is not about
+ to end, suspend processing */
+ if ((hhash->SuspendRequest == HAL_HASH_SUSPEND) && ((buffercounter + 4U) < Size))
+ {
+ /* wait for flag BUSY not set before Wait for DINIS = 1*/
+ if (buffercounter >= 64U)
+ {
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Wait for DINIS = 1, which occurs when 16 32-bit locations are free
+ in the input buffer */
+ if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ /* Reset SuspendRequest */
+ hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE;
+
+ /* Depending whether the key or the input data were fed to the Peripheral, the feeding point
+ reached at suspension time is not saved in the same handle fields */
+ if ((hhash->Phase == HAL_HASH_PHASE_PROCESS) || (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2))
+ {
+ /* Save current reading and writing locations of Input and Output buffers */
+ hhash->pHashInBuffPtr = (uint8_t *)inputaddr;
+ /* Save the number of bytes that remain to be processed at this point */
+ hhash->HashInCount = Size - (buffercounter + 4U);
+ }
+ else if ((hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3))
+ {
+ /* Save current reading and writing locations of Input and Output buffers */
+ hhash->pHashKeyBuffPtr = (uint8_t *)inputaddr;
+ /* Save the number of bytes that remain to be processed at this point */
+ hhash->HashKeyCount = Size - (buffercounter + 4U);
+ }
+ else
+ {
+ /* Unexpected phase: unlock process and report error */
+ hhash->State = HAL_HASH_STATE_READY;
+ __HAL_UNLOCK(hhash);
+ return HAL_ERROR;
+ }
+
+ /* Set the HASH state to Suspended and exit to stop entering data */
+ hhash->State = HAL_HASH_STATE_SUSPENDED;
+
+ return HAL_OK;
+ } /* if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS)) */
+ } /* if ((hhash->SuspendRequest == HAL_HASH_SUSPEND) && ((buffercounter+4) < Size)) */
+ } /* for(buffercounter = 0; buffercounter < Size; buffercounter+=4) */
+
+ /* At this point, all the data have been entered to the Peripheral: exit */
+ return HAL_OK;
+}
+
+/**
+ * @brief Retrieve the message digest.
+ * @param pMsgDigest pointer to the computed digest.
+ * @param Size message digest size in bytes.
+ * @retval None
+ */
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+ uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+ switch (Size)
+ {
+ /* Read the message digest */
+ case 16: /* MD5 */
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]);
+ break;
+ case 20: /* SHA1 */
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[4]);
+ break;
+ case 28: /* SHA224 */
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[4]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+ break;
+ case 32: /* SHA256 */
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH->HR[4]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+ msgdigest += 4U;
+ *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
+ break;
+ default:
+ break;
+ }
+}
+
+
+
+/**
+ * @brief Handle HASH processing Timeout.
+ * @param hhash HASH handle.
+ * @param Flag specifies the HASH flag to check.
+ * @param Status the Flag status (SET or RESET).
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef HASH_WaitOnFlagUntilTimeout(HASH_HandleTypeDef *hhash, uint32_t Flag, FlagStatus Status,
+ uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if (Status == RESET)
+ {
+ while (__HAL_HASH_GET_FLAG(Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ /* Set State to Ready to be able to restart later on */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Store time out issue in handle status */
+ hhash->Status = HAL_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while (__HAL_HASH_GET_FLAG(Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ /* Set State to Ready to be able to restart later on */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Store time out issue in handle status */
+ hhash->Status = HAL_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+
+/**
+ * @brief HASH processing in interruption mode.
+ * @param hhash HASH handle.
+ * @note HASH_IT() regularly reads hhash->SuspendRequest to check whether
+ * or not the HASH processing must be suspended. If this is the case, the
+ * processing is suspended when possible and the Peripheral feeding point reached at
+ * suspension time is stored in the handle for resumption later on.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef HASH_IT(HASH_HandleTypeDef *hhash)
+{
+ if (hhash->State == HAL_HASH_STATE_BUSY)
+ {
+ /* ITCounter must not be equal to 0 at this point. Report an error if this is the case. */
+ if (hhash->HashITCounter == 0U)
+ {
+ /* Disable Interrupts */
+ __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+ /* HASH state set back to Ready to prevent any issue in user code
+ present in HAL_HASH_ErrorCallback() */
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+ else if (hhash->HashITCounter == 1U)
+ {
+ /* This is the first call to HASH_IT, the first input data are about to be
+ entered in the Peripheral. A specific processing is carried out at this point to
+ start-up the processing. */
+ hhash->HashITCounter = 2U;
+ }
+ else
+ {
+ /* Cruise speed reached, HashITCounter remains equal to 3 until the end of
+ the HASH processing or the end of the current step for HMAC processing. */
+ hhash->HashITCounter = 3U;
+ }
+
+ /* If digest is ready */
+ if (__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ /* Read the digest */
+ HASH_GetDigest(hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH());
+
+ /* Disable Interrupts */
+ __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Reset HASH state machine */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+ /* Call digest computation complete call back */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->DgstCpltCallback(hhash);
+#else
+ HAL_HASH_DgstCpltCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+ return HAL_OK;
+ }
+
+ /* If Peripheral ready to accept new data */
+ if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+
+ /* If the suspension flag has been raised and if the processing is not about
+ to end, suspend processing */
+ if ((hhash->HashInCount != 0U) && (hhash->SuspendRequest == HAL_HASH_SUSPEND))
+ {
+ /* Disable Interrupts */
+ __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Reset SuspendRequest */
+ hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE;
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_SUSPENDED;
+
+ return HAL_OK;
+ }
+
+ /* Enter input data in the Peripheral through HASH_Write_Block_Data() call and
+ check whether the digest calculation has been triggered */
+ if (HASH_Write_Block_Data(hhash) == HASH_DIGEST_CALCULATION_STARTED)
+ {
+ /* Call Input data transfer complete call back
+ (called at the end of each step for HMAC) */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->InCpltCallback(hhash);
+#else
+ HAL_HASH_InCpltCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+ if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1)
+ {
+ /* Wait until Peripheral is not busy anymore */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK)
+ {
+ /* Disable Interrupts */
+ __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+ return HAL_TIMEOUT;
+ }
+ /* Initialization start for HMAC STEP 2 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; /* Move phase from Step 1 to Step 2 */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->HashBuffSize); /* Set NBLW for the input message */
+ hhash->HashInCount = hhash->HashBuffSize; /* Set the input data size (in bytes) */
+ hhash->pHashInBuffPtr = hhash->pHashMsgBuffPtr; /* Set the input data address */
+ hhash->HashITCounter = 1; /* Set ITCounter to 1 to indicate the start
+ of a new phase */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DINI); /* Enable IT (was disabled in HASH_Write_Block_Data) */
+ }
+ else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)
+ {
+ /* Wait until Peripheral is not busy anymore */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK)
+ {
+ /* Disable Interrupts */
+ __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+ return HAL_TIMEOUT;
+ }
+ /* Initialization start for HMAC STEP 3 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; /* Move phase from Step 2 to Step 3 */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize); /* Set NBLW for the key */
+ hhash->HashInCount = hhash->Init.KeySize; /* Set the key size (in bytes) */
+ hhash->pHashInBuffPtr = hhash->Init.pKey; /* Set the key address */
+ hhash->HashITCounter = 1; /* Set ITCounter to 1 to indicate the start
+ of a new phase */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DINI); /* Enable IT (was disabled in HASH_Write_Block_Data) */
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ } /* if (HASH_Write_Block_Data(hhash) == HASH_DIGEST_CALCULATION_STARTED) */
+ } /* if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))*/
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief Write a block of data in HASH Peripheral in interruption mode.
+ * @param hhash HASH handle.
+ * @note HASH_Write_Block_Data() is called under interruption by HASH_IT().
+ * @retval HAL status
+ */
+static uint32_t HASH_Write_Block_Data(HASH_HandleTypeDef *hhash)
+{
+ uint32_t inputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+ uint32_t ret = HASH_DIGEST_CALCULATION_NOT_STARTED;
+
+ /* If there are more than 64 bytes remaining to be entered */
+ if (hhash->HashInCount > 64U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register
+ (16 32-bit words, or 64 bytes are entered) */
+ for (buffercounter = 0U; buffercounter < 64U; buffercounter += 4U)
+ {
+ HASH->DIN = *(uint32_t *)inputaddr;
+ inputaddr += 4U;
+ }
+ /* If this is the start of input data entering, an additional word
+ must be entered to start up the HASH processing */
+ if (hhash->HashITCounter == 2U)
+ {
+ HASH->DIN = *(uint32_t *)inputaddr;
+ if (hhash->HashInCount >= 68U)
+ {
+ /* There are still data waiting to be entered in the Peripheral.
+ Decrement buffer counter and set pointer to the proper
+ memory location for the next data entering round. */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr += 68U;
+ }
+ else
+ {
+ /* All the input buffer has been fed to the HW. */
+ hhash->HashInCount = 0U;
+ }
+ }
+ else
+ {
+ /* 64 bytes have been entered and there are still some remaining:
+ Decrement buffer counter and set pointer to the proper
+ memory location for the next data entering round.*/
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr += 64U;
+ }
+ }
+ else
+ {
+ /* 64 or less bytes remain to be entered. This is the last
+ data entering round. */
+
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ __HAL_HASH_DISABLE_IT(HASH_IT_DINI);
+
+ /* Write the Input block in the Data IN register */
+ for (buffercounter = 0U; buffercounter < ((inputcounter + 3U) / 4U); buffercounter++)
+ {
+ HASH->DIN = *(uint32_t *)inputaddr;
+ inputaddr += 4U;
+ }
+
+ if (hhash->Accumulation == 1U)
+ {
+ /* Field accumulation is set, API only feeds data to the Peripheral and under interruption.
+ The digest computation will be started when the last buffer data are entered. */
+
+ /* Reset multi buffers accumulation flag */
+ hhash->Accumulation = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call Input data transfer complete call back */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+ hhash->InCpltCallback(hhash);
+#else
+ HAL_HASH_InCpltCallback(hhash);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* Start the Digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Return indication that digest calculation has started:
+ this return value triggers the call to Input data transfer
+ complete call back as well as the proper transition from
+ one step to another in HMAC mode. */
+ ret = HASH_DIGEST_CALCULATION_STARTED;
+ }
+ /* Reset buffer counter */
+ hhash->HashInCount = 0;
+ }
+
+ /* Return whether or digest calculation has started */
+ return ret;
+}
+
+/**
+ * @brief HMAC processing in polling mode.
+ * @param hhash HASH handle.
+ * @param Timeout Timeout value.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef HMAC_Processing(HASH_HandleTypeDef *hhash, uint32_t Timeout)
+{
+ /* Ensure first that Phase is correct */
+ if ((hhash->Phase != HAL_HASH_PHASE_HMAC_STEP_1) && (hhash->Phase != HAL_HASH_PHASE_HMAC_STEP_2)
+ && (hhash->Phase != HAL_HASH_PHASE_HMAC_STEP_3))
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+ /* HMAC Step 1 processing */
+ if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1)
+ {
+ /************************** STEP 1 ******************************************/
+ /* Configure the Number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in Data register */
+ hhash->Status = HASH_WriteData(hhash, hhash->pHashKeyBuffPtr, hhash->HashKeyCount);
+ if (hhash->Status != HAL_OK)
+ {
+ return hhash->Status;
+ }
+
+ /* Check whether or not key entering process has been suspended */
+ if (hhash->State == HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Stop right there and return function status */
+ return HAL_OK;
+ }
+
+ /* No processing suspension at this point: set DCAL bit. */
+ __HAL_HASH_START_DIGEST();
+
+ /* Wait for BUSY flag to be cleared */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Move from Step 1 to Step 2 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2;
+
+ }
+
+ /* HMAC Step 2 processing.
+ After phase check, HMAC_Processing() may
+ - directly start up from this point in resumption case
+ if the same Step 2 processing was suspended previously
+ - or fall through from the Step 1 processing carried out hereabove */
+ if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)
+ {
+ /************************** STEP 2 ******************************************/
+ /* Configure the Number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->HashBuffSize);
+
+ /* Write input buffer in Data register */
+ hhash->Status = HASH_WriteData(hhash, hhash->pHashInBuffPtr, hhash->HashInCount);
+ if (hhash->Status != HAL_OK)
+ {
+ return hhash->Status;
+ }
+
+ /* Check whether or not data entering process has been suspended */
+ if (hhash->State == HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Stop right there and return function status */
+ return HAL_OK;
+ }
+
+ /* No processing suspension at this point: set DCAL bit. */
+ __HAL_HASH_START_DIGEST();
+
+ /* Wait for BUSY flag to be cleared */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Move from Step 2 to Step 3 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3;
+ /* In case Step 1 phase was suspended then resumed,
+ set again Key input buffers and size before moving to
+ next step */
+ hhash->pHashKeyBuffPtr = hhash->Init.pKey;
+ hhash->HashKeyCount = hhash->Init.KeySize;
+ }
+
+
+ /* HMAC Step 3 processing.
+ After phase check, HMAC_Processing() may
+ - directly start up from this point in resumption case
+ if the same Step 3 processing was suspended previously
+ - or fall through from the Step 2 processing carried out hereabove */
+ if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3)
+ {
+ /************************** STEP 3 ******************************************/
+ /* Configure the Number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in Data register */
+ hhash->Status = HASH_WriteData(hhash, hhash->pHashKeyBuffPtr, hhash->HashKeyCount);
+ if (hhash->Status != HAL_OK)
+ {
+ return hhash->Status;
+ }
+
+ /* Check whether or not key entering process has been suspended */
+ if (hhash->State == HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Stop right there and return function status */
+ return HAL_OK;
+ }
+
+ /* No processing suspension at this point: start the Digest calculation. */
+ __HAL_HASH_START_DIGEST();
+
+ /* Wait for DCIS flag to be set */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH());
+
+ /* Reset HASH state machine */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+ }
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initialize the HASH peripheral, next process pInBuffer then
+ * read the computed digest.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest.
+ * @param Timeout Timeout value.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HASH_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Timeout, uint32_t Algorithm)
+{
+ uint8_t *pInBuffer_tmp; /* input data address, input parameter of HASH_WriteData() */
+ uint32_t Size_tmp; /* input data size (in bytes), input parameter of HASH_WriteData() */
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+
+
+ /* Initiate HASH processing in case of start or resumption */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (pOutBuffer == NULL))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Check if initialization phase has not been already performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT);
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* pInBuffer_tmp and Size_tmp are initialized to be used afterwards as
+ input parameters of HASH_WriteData() */
+ pInBuffer_tmp = pInBuffer; /* pInBuffer_tmp is set to the input data address */
+ Size_tmp = Size; /* Size_tmp contains the input data size in bytes */
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+ }
+ else if (hhash->Phase == HAL_HASH_PHASE_PROCESS)
+ {
+ /* if the Peripheral has already been initialized, two cases are possible */
+
+ /* Process resumption time ... */
+ if (hhash->State == HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Since this is resumption, pInBuffer_tmp and Size_tmp are not set
+ to the API input parameters but to those saved beforehand by HASH_WriteData()
+ when the processing was suspended */
+ pInBuffer_tmp = hhash->pHashInBuffPtr;
+ Size_tmp = hhash->HashInCount;
+ }
+ /* ... or multi-buffer HASH processing end */
+ else
+ {
+ /* pInBuffer_tmp and Size_tmp are initialized to be used afterwards as
+ input parameters of HASH_WriteData() */
+ pInBuffer_tmp = pInBuffer;
+ Size_tmp = Size;
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+ }
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+ }
+ else
+ {
+ /* Phase error */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+
+ /* Write input buffer in Data register */
+ hhash->Status = HASH_WriteData(hhash, pInBuffer_tmp, Size_tmp);
+ if (hhash->Status != HAL_OK)
+ {
+ return hhash->Status;
+ }
+
+ /* If the process has not been suspended, carry on to digest calculation */
+ if (hhash->State != HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Start the Digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Wait for DCIS flag to be set */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, HASH_DIGEST_LENGTH());
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Reset HASH state machine */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief If not already done, initialize the HASH peripheral then
+ * processes pInBuffer.
+ * @note Field hhash->Phase of HASH handle is tested to check whether or not
+ * the Peripheral has already been initialized.
+ * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
+ * HASH digest computation is corrupted.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes, must be a multiple of 4.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HASH_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm)
+{
+ uint8_t *pInBuffer_tmp; /* input data address, input parameter of HASH_WriteData() */
+ uint32_t Size_tmp; /* input data size (in bytes), input parameter of HASH_WriteData() */
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+
+ /* Make sure the input buffer size (in bytes) is a multiple of 4 */
+ if ((Size % 4U) != 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Initiate HASH processing in case of start or resumption */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* If resuming the HASH processing */
+ if (hhash->State == HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Since this is resumption, pInBuffer_tmp and Size_tmp are not set
+ to the API input parameters but to those saved beforehand by HASH_WriteData()
+ when the processing was suspended */
+ pInBuffer_tmp = hhash->pHashInBuffPtr; /* pInBuffer_tmp is set to the input data address */
+ Size_tmp = hhash->HashInCount; /* Size_tmp contains the input data size in bytes */
+
+ }
+ else
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* pInBuffer_tmp and Size_tmp are initialized to be used afterwards as
+ input parameters of HASH_WriteData() */
+ pInBuffer_tmp = pInBuffer; /* pInBuffer_tmp is set to the input data address */
+ Size_tmp = Size; /* Size_tmp contains the input data size in bytes */
+
+ /* Check if initialization phase has already be performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT);
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ }
+
+ /* Write input buffer in Data register */
+ hhash->Status = HASH_WriteData(hhash, pInBuffer_tmp, Size_tmp);
+ if (hhash->Status != HAL_OK)
+ {
+ return hhash->Status;
+ }
+
+ /* If the process has not been suspended, move the state to Ready */
+ if (hhash->State != HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+
+}
+
+
+/**
+ * @brief If not already done, initialize the HASH peripheral then
+ * processes pInBuffer in interruption mode.
+ * @note Field hhash->Phase of HASH handle is tested to check whether or not
+ * the Peripheral has already been initialized.
+ * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
+ * HASH digest computation is corrupted.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes, must be a multiple of 4.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm)
+{
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+ __IO uint32_t inputaddr = (uint32_t) pInBuffer;
+ uint32_t SizeVar = Size;
+
+ /* Make sure the input buffer size (in bytes) is a multiple of 4 */
+ if ((Size % 4U) != 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Initiate HASH processing in case of start or resumption */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* If resuming the HASH processing */
+ if (hhash->State == HAL_HASH_STATE_SUSPENDED)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+ }
+ else
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already be performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT);
+ hhash->HashITCounter = 1;
+ }
+ else
+ {
+ hhash->HashITCounter = 3; /* 'cruise-speed' reached during a previous buffer processing */
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* If DINIS is equal to 0 (for example if an incomplete block has been previously
+ fed to the Peripheral), the DINIE interruption won't be triggered when DINIE is set.
+ Therefore, first words are manually entered until DINIS raises, or until there
+ is not more data to enter. */
+ while ((!(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))) && (SizeVar > 0U))
+ {
+
+ /* Write input data 4 bytes at a time */
+ HASH->DIN = *(uint32_t *)inputaddr;
+ inputaddr += 4U;
+ SizeVar -= 4U;
+ }
+
+ /* If DINIS is still not set or if all the data have been fed, stop here */
+ if ((!(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))) || (SizeVar == 0U))
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+ /* otherwise, carry on in interrupt-mode */
+ hhash->HashInCount = SizeVar; /* Counter used to keep track of number of data
+ to be fed to the Peripheral */
+ hhash->pHashInBuffPtr = (uint8_t *)inputaddr; /* Points at data which will be fed to the Peripheral at
+ the next interruption */
+ /* In case of suspension, hhash->HashInCount and hhash->pHashInBuffPtr contain
+ the information describing where the HASH process is stopped.
+ These variables are used later on to resume the HASH processing at the
+ correct location. */
+
+ }
+
+ /* Set multi buffers accumulation flag */
+ hhash->Accumulation = 1U;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Data Input interrupt */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DINI);
+
+ /* Return function status */
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+}
+
+
+
+/**
+ * @brief Initialize the HASH peripheral, next process pInBuffer then
+ * read the computed digest in interruption mode.
+ * @note Digest is available in pOutBuffer.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HASH_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Algorithm)
+{
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+ __IO uint32_t inputaddr = (uint32_t) pInBuffer;
+ uint32_t polling_step = 0U;
+ uint32_t initialization_skipped = 0U;
+ uint32_t SizeVar = Size;
+
+ /* If State is ready or suspended, start or resume IT-based HASH processing */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U) || (pOutBuffer == NULL))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Initialize IT counter */
+ hhash->HashITCounter = 1;
+
+ /* Check if initialization phase has already be performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT);
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(SizeVar);
+
+
+ hhash->HashInCount = SizeVar; /* Counter used to keep track of number of data
+ to be fed to the Peripheral */
+ hhash->pHashInBuffPtr = pInBuffer; /* Points at data which will be fed to the Peripheral at
+ the next interruption */
+ /* In case of suspension, hhash->HashInCount and hhash->pHashInBuffPtr contain
+ the information describing where the HASH process is stopped.
+ These variables are used later on to resume the HASH processing at the
+ correct location. */
+
+ hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */
+ }
+ else
+ {
+ initialization_skipped = 1; /* info user later on in case of multi-buffer */
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* If DINIS is equal to 0 (for example if an incomplete block has been previously
+ fed to the Peripheral), the DINIE interruption won't be triggered when DINIE is set.
+ Therefore, first words are manually entered until DINIS raises. */
+ while ((!(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))) && (SizeVar > 3U))
+ {
+ polling_step = 1U; /* note that some words are entered before enabling the interrupt */
+
+ /* Write input data 4 bytes at a time */
+ HASH->DIN = *(uint32_t *)inputaddr;
+ inputaddr += 4U;
+ SizeVar -= 4U;
+ }
+
+ if (polling_step == 1U)
+ {
+ if (SizeVar == 0U)
+ {
+ /* If all the data have been entered at this point, it only remains to
+ read the digest */
+ hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */
+
+ /* Start the Digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ /* It remains data to enter and the Peripheral is ready to trigger DINIE,
+ carry on as usual.
+ Update HashInCount and pHashInBuffPtr accordingly. */
+ hhash->HashInCount = SizeVar;
+ hhash->pHashInBuffPtr = (uint8_t *)inputaddr;
+ /* Update the configuration of the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(SizeVar);
+ hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */
+ if (initialization_skipped == 1U)
+ {
+ hhash->HashITCounter = 3; /* 'cruise-speed' reached during a previous buffer processing */
+ }
+ }
+ else
+ {
+ /* DINIS is not set but it remains a few data to enter (not enough for a full word).
+ Manually enter the last bytes before enabling DCIE. */
+ __HAL_HASH_SET_NBVALIDBITS(SizeVar);
+ HASH->DIN = *(uint32_t *)inputaddr;
+
+ /* Start the Digest calculation */
+ hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */
+ __HAL_HASH_START_DIGEST();
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ } /* if (polling_step == 1) */
+
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+}
+
+
+/**
+ * @brief Initialize the HASH peripheral then initiate a DMA transfer
+ * to feed the input buffer to the Peripheral.
+ * @note If MDMAT bit is set before calling this function (multi-buffer
+ * HASH processing case), the input buffer size (in bytes) must be
+ * a multiple of 4 otherwise, the HASH digest computation is corrupted.
+ * For the processing of the last buffer of the thread, MDMAT bit must
+ * be reset and the buffer length (in bytes) doesn't have to be a
+ * multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HASH_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm)
+{
+ uint32_t inputaddr;
+ uint32_t inputSize;
+ HAL_StatusTypeDef status ;
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+
+
+ /* Make sure the input buffer size (in bytes) is a multiple of 4 when MDMAT bit is set
+ (case of multi-buffer HASH processing) */
+ assert_param(IS_HASH_DMA_MULTIBUFFER_SIZE(Size));
+
+ /* If State is ready or suspended, start or resume polling-based HASH processing */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U) ||
+ /* Check phase coherency. Phase must be
+ either READY (fresh start)
+ or PROCESS (multi-buffer HASH management) */
+ ((hhash->Phase != HAL_HASH_PHASE_READY) && (!(IS_HASH_PROCESSING(hhash)))))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* If not a resumption case */
+ if (hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed.
+ If Phase is already set to HAL_HASH_PHASE_PROCESS, this means the
+ API is processing a new input data message in case of multi-buffer HASH
+ computation. */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+ }
+
+ /* Configure the Number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ inputaddr = (uint32_t)pInBuffer; /* DMA transfer start address */
+ inputSize = Size; /* DMA transfer size (in bytes) */
+
+ /* In case of suspension request, save the starting parameters */
+ hhash->pHashInBuffPtr = pInBuffer; /* DMA transfer start address */
+ hhash->HashInCount = Size; /* DMA transfer size (in bytes) */
+
+ }
+ /* If resumption case */
+ else
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Resumption case, inputaddr and inputSize are not set to the API input parameters
+ but to those saved beforehand by HAL_HASH_DMAFeed_ProcessSuspend() when the
+ processing was suspended */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr; /* DMA transfer start address */
+ inputSize = hhash->HashInCount; /* DMA transfer size (in bytes) */
+
+ }
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Store number of words already pushed to manage proper DMA processing suspension */
+ hhash->NbWordsAlreadyPushed = HASH_NBW_PUSHED();
+
+ /* Enable the DMA In DMA stream */
+ status = HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, \
+ (((inputSize % 4U) != 0U) ? ((inputSize + (4U - (inputSize % 4U))) / 4U) : \
+ (inputSize / 4U)));
+
+ /* Enable DMA requests */
+ SET_BIT(HASH->CR, HASH_CR_DMAE);
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ if (status != HAL_OK)
+ {
+ /* Update HASH state machine to error */
+ hhash->State = HAL_HASH_STATE_ERROR;
+ }
+
+ return status;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Return the computed digest.
+ * @note The API waits for DCIS to be set then reads the computed digest.
+ * @param hhash HASH handle.
+ * @param pOutBuffer pointer to the computed digest.
+ * @param Timeout Timeout value.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HASH_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout)
+{
+
+ if (hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Check parameter */
+ if (pOutBuffer == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state to busy */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Wait for DCIS flag to be set */
+ if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, HASH_DIGEST_LENGTH());
+
+ /* Change the HASH state to ready */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Reset HASH state machine */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ /* Process UnLock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+}
+
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC mode, next process pInBuffer then
+ * read the computed digest.
+ * @note Digest is available in pOutBuffer.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest.
+ * @param Timeout Timeout value.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HMAC_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Timeout, uint32_t Algorithm)
+{
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+
+ /* If State is ready or suspended, start or resume polling-based HASH processing */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U) || (hhash->Init.pKey == NULL) || (hhash->Init.KeySize == 0U)
+ || (pOutBuffer == NULL))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already be performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits */
+ if (hhash->Init.KeySize > 64U)
+ {
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT,
+ Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT,
+ Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ /* Set the phase to Step 1 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1;
+ /* Resort to hhash internal fields to feed the Peripheral.
+ Parameters will be updated in case of suspension to contain the proper
+ information at resumption time. */
+ hhash->pHashOutBuffPtr = pOutBuffer; /* Output digest address */
+ hhash->pHashInBuffPtr = pInBuffer; /* Input data address, HMAC_Processing input
+ parameter for Step 2 */
+ hhash->HashInCount = Size; /* Input data size, HMAC_Processing input
+ parameter for Step 2 */
+ hhash->HashBuffSize = Size; /* Store the input buffer size for the whole HMAC process*/
+ hhash->pHashKeyBuffPtr = hhash->Init.pKey; /* Key address, HMAC_Processing input parameter for Step
+ 1 and Step 3 */
+ hhash->HashKeyCount = hhash->Init.KeySize; /* Key size, HMAC_Processing input parameter for Step 1
+ and Step 3 */
+ }
+
+ /* Carry out HMAC processing */
+ return HMAC_Processing(hhash, Timeout);
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC mode, next process pInBuffer then
+ * read the computed digest in interruption mode.
+ * @note Digest is available in pOutBuffer.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param pOutBuffer pointer to the computed digest.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HMAC_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
+ uint32_t Algorithm)
+{
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+
+ /* If State is ready or suspended, start or resume IT-based HASH processing */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U) || (hhash->Init.pKey == NULL) || (hhash->Init.KeySize == 0U)
+ || (pOutBuffer == NULL))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Initialize IT counter */
+ hhash->HashITCounter = 1;
+
+ /* Check if initialization phase has already be performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits */
+ if (hhash->Init.KeySize > 64U)
+ {
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT,
+ Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT,
+ Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+
+ /* Resort to hhash internal fields hhash->pHashInBuffPtr and hhash->HashInCount
+ to feed the Peripheral whatever the HMAC step.
+ Lines below are set to start HMAC Step 1 processing where key is entered first. */
+ hhash->HashInCount = hhash->Init.KeySize; /* Key size */
+ hhash->pHashInBuffPtr = hhash->Init.pKey ; /* Key address */
+
+ /* Store input and output parameters in handle fields to manage steps transition
+ or possible HMAC suspension/resumption */
+ hhash->pHashKeyBuffPtr = hhash->Init.pKey; /* Key address */
+ hhash->pHashMsgBuffPtr = pInBuffer; /* Input message address */
+ hhash->HashBuffSize = Size; /* Input message size (in bytes) */
+ hhash->pHashOutBuffPtr = pOutBuffer; /* Output digest address */
+
+ /* Configure the number of valid bits in last word of the key */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Set the phase to Step 1 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1;
+ }
+ else if ((hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3))
+ {
+ /* Restart IT-based HASH processing after Step 1 or Step 3 suspension */
+
+ }
+ else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)
+ {
+ /* Restart IT-based HASH processing after Step 2 suspension */
+
+ }
+ else
+ {
+ /* Error report as phase incorrect */
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ __HAL_HASH_ENABLE_IT(HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+}
+
+
+
+/**
+ * @brief Initialize the HASH peripheral in HMAC mode then initiate the required
+ * DMA transfers to feed the key and the input buffer to the Peripheral.
+ * @note Same key is used for the inner and the outer hash functions; pointer to key and
+ * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
+ * @note In case of multi-buffer HMAC processing, the input buffer size (in bytes) must
+ * be a multiple of 4 otherwise, the HASH digest computation is corrupted.
+ * Only the length of the last buffer of the thread doesn't have to be a
+ * multiple of 4.
+ * @param hhash HASH handle.
+ * @param pInBuffer pointer to the input buffer (buffer to be hashed).
+ * @param Size length of the input buffer in bytes.
+ * @param Algorithm HASH algorithm.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HMAC_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm)
+{
+ uint32_t inputaddr;
+ uint32_t inputSize;
+ HAL_StatusTypeDef status ;
+ HAL_HASH_StateTypeDef State_tmp = hhash->State;
+ /* Make sure the input buffer size (in bytes) is a multiple of 4 when digest calculation
+ is disabled (multi-buffer HMAC processing, MDMAT bit to be set) */
+ assert_param(IS_HMAC_DMA_MULTIBUFFER_SIZE(hhash, Size));
+ /* If State is ready or suspended, start or resume DMA-based HASH processing */
+ if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED))
+ {
+ /* Check input parameters */
+ if ((pInBuffer == NULL) || (Size == 0U) || (hhash->Init.pKey == NULL) || (hhash->Init.KeySize == 0U) ||
+ /* Check phase coherency. Phase must be
+ either READY (fresh start)
+ or one of HMAC PROCESS steps (multi-buffer HASH management) */
+ ((hhash->Phase != HAL_HASH_PHASE_READY) && (!(IS_HMAC_PROCESSING(hhash)))))
+ {
+ hhash->State = HAL_HASH_STATE_READY;
+ return HAL_ERROR;
+ }
+
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* If not a case of resumption after suspension */
+ if (hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Check whether or not initialization phase has already be performed */
+ if (hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+ /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits.
+ At the same time, ensure MDMAT bit is cleared. */
+ if (hhash->Init.KeySize > 64U)
+ {
+ MODIFY_REG(HASH->CR, HASH_CR_MDMAT | HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT,
+ Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ MODIFY_REG(HASH->CR, HASH_CR_MDMAT | HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT,
+ Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ /* Store input aparameters in handle fields to manage steps transition
+ or possible HMAC suspension/resumption */
+ hhash->HashInCount = hhash->Init.KeySize; /* Initial size for first DMA transfer (key size) */
+ hhash->pHashKeyBuffPtr = hhash->Init.pKey; /* Key address */
+ hhash->pHashInBuffPtr = hhash->Init.pKey ; /* First address passed to DMA (key address at Step 1) */
+ hhash->pHashMsgBuffPtr = pInBuffer; /* Input data address */
+ hhash->HashBuffSize = Size; /* input data size (in bytes) */
+
+ /* Set DMA input parameters */
+ inputaddr = (uint32_t)(hhash->Init.pKey); /* Address passed to DMA (start by entering Key message) */
+ inputSize = hhash->Init.KeySize; /* Size for first DMA transfer (in bytes) */
+
+ /* Configure the number of valid bits in last word of the key */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Set the phase to Step 1 */
+ hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1;
+
+ }
+ else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)
+ {
+ /* Process a new input data message in case of multi-buffer HMAC processing
+ (this is not a resumption case) */
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save input parameters to be able to manage possible suspension/resumption */
+ hhash->HashInCount = Size; /* Input message address */
+ hhash->pHashInBuffPtr = pInBuffer; /* Input message size in bytes */
+
+ /* Set DMA input parameters */
+ inputaddr = (uint32_t)pInBuffer; /* Input message address */
+ inputSize = Size; /* Input message size in bytes */
+
+ if (hhash->DigestCalculationDisable == RESET)
+ {
+ /* This means this is the last buffer of the multi-buffer sequence: DCAL needs to be set. */
+ __HAL_HASH_RESET_MDMAT();
+ __HAL_HASH_SET_NBVALIDBITS(inputSize);
+ }
+ }
+ else
+ {
+ /* Phase not aligned with handle READY state */
+ __HAL_UNLOCK(hhash);
+ /* Return function status */
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Resumption case (phase may be Step 1, 2 or 3) */
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Set DMA input parameters at resumption location;
+ inputaddr and inputSize are not set to the API input parameters
+ but to those saved beforehand by HAL_HASH_DMAFeed_ProcessSuspend() when the
+ processing was suspended. */
+ inputaddr = (uint32_t)(hhash->pHashInBuffPtr); /* Input message address */
+ inputSize = hhash->HashInCount; /* Input message size in bytes */
+ }
+
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Store number of words already pushed to manage proper DMA processing suspension */
+ hhash->NbWordsAlreadyPushed = HASH_NBW_PUSHED();
+
+ /* Enable the DMA In DMA stream */
+ status = HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, \
+ (((inputSize % 4U) != 0U) ? ((inputSize + (4U - (inputSize % 4U))) / 4U) \
+ : (inputSize / 4U)));
+
+ /* Enable DMA requests */
+ SET_BIT(HASH->CR, HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ if (status != HAL_OK)
+ {
+ /* Update HASH state machine to error */
+ hhash->State = HAL_HASH_STATE_ERROR;
+ }
+
+ /* Return function status */
+ return status;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @}
+ */
+
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+#endif /* HASH*/
+/**
+ * @}
+ */
+
|